Austenite Stabilization by Quenching and Partitioning in a Low-Alloy Medium Carbon Steel

Abstract:

Innovative treatments like quenching and partitioning (Q&P) have been recently proposed to improve the combination of strength and ductility of high strength steels by stabilization of significant fractions of retained austenite in a microstructure of tempered martensite. The decomposition of austenite into bainite and carbides precipitation are the two main competitive processes that reduce the content of retained austenite achievable at room temperature. A medium carbon low-silicon steel (0.46% C and 0.25% Si) has been studied to identify in which limits the austenite can be enriched in C and stabilized by Q&P, although a silicon content well below 1.5%, commonly used to retard cementite precipitation, is adopted; indeed, high Si contents are detrimental to the surface quality of the product due to the formation of adherent scale in high temperature manufacturing cycles. The heat treatments have been carried out with a quenching dilatometer, investigating the carbon partitioning process mainly below Ms, where cementite precipitation is not activated. The dilatometric curves show the progressive enrichment of carbon in the untransformed austenite and the occurrence of austenite phase transformation during the isothermal holding below Ms. A range of temperatures and times has been found where a content of about 10% of retained austenite can be stabilized at room temperature, a percentage much lower than the theoretical maximum achievable with the carbon content of this steel.

• Periodical: Materials Science Forum (Volumes 706-709)
• Pages: 2234-2239
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.706-709.2234
• Online since: January 2012
• Authors: E. Paravicini Bagliani, E. Anelli, Marco Boniardi
• Keywords: Dilatometry, Low Alloy Steel, Partitioning, Quenching, Retained Austenite

References

[1] D.V. Edmonds et al., Material Science and engineering A 438-440 (2006) 25-34.

[2] J. Speer et al., Acta Materialia 51 (2003), 2611-2622.

[3] D.P. Koistinen, R.E. Marburger, Acta Metall. 7 (1959), 59-60.

[4] S. M. C. van Bohemen, J. Sietsma, Materials Science and Technology Vol. 25 n. 8 (2009), 1009-1012.

[5] D.L. Bish & S.A. Howard, J. Appl. Cryst. 21 (1988), 86-91.

[6] A.R. Marder and G. Krauss, Trans. ASM, vol. 60, 1967, pp.651-660.

[7] S.M.C. van Bohemen, et al., Scripta Materialia 58 (2008), 488-491.

[8] D. H. Kim et al., Metallurgical and Materials transactions A Volume 40A, (2009), 2048-(2060).