The Performance and Cutting Parameters Optimization in Milling of Nickel Base Superalloy FGH97

Abstract:

The powder preparation, material properties, the cutting characteristics and parameter selection for a nickel base superalloy FGH97 are summarized in this paper. It introduces the influence of various elements on the properties of the alloy, the ideal tool materials is coated cemented carbide tool and PCBN ceramic cutting tool. Generally we can choose the rake angle of 0°~10°, clearance angle of 6°~12°, cutting edge angle of 30°~60°, distortion angle of 0.5°~3°, tool cutting edge inclination angle of-10°~-20°. The optimal parameters for machining superalloy is axial cutting depth (range from 0.15~0.20mm), radial cutting depth (range from 10~20mm), the cutting speed (range from 40~60m/min), feed per tooth (range from 0.08~0.10mm/z).

• Periodical: Materials Science Forum (Volumes 800-801)
• Pages: 627-632
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.800-801.627
• Online since: July 2014
• Authors: Tong Hui Liu, Pei Quan Guo*, Yang Qiao, Qiu Yue Cui
• Keywords: Cutting Characteristics, FGH97, Material Properties, Parameter Selection, Preparation of Powder

References

[1] Y. Qiao, Study on the machinability in high efficiency machining of powder metallurgy superalloy, Shandong University (2011).

[2] J.F. Lei, Y. Zhong, J. Yu, P/M nickel-based superalloy, Aerosp. Mat. Technol. 06 (2011) 18-22.

[3] Editorial Committee of China Aeronautical Materials Handbook, China Aeronautical Materials Handbook, second ed., China Zhijian Publishing House, Beijing (2002).

[4] J.W. Zou, W.X. Wang, Development and application of P/M superalloy, J. Aeronaut. Mat. 26 (2006) 244-250.

[5] D.X. Dong, Y. Xiong, H.N. Liu, et al., NDT method for the FGH96 and FGH97 superalloy powder disks, Nondestr. Test. 34 (2012) 76-80.

[6] Y.W. Zhang, J.T. Liu, Development in powder metallurgy superalloy, Mat. China 32 (2013) 1-11.

[7] Y.W. Zhang, S.Z. Yang, L. Li, et al., Current status of research on PM superalloy in China, Mat. Rev. 16 (2002) 1-4.

[8] Y.W. Zhang, Y.H. Shangguan, Research and development in P/M superalloy, Powder. Metall. Ind. 14 (2004) 30-43.

[9] J. Du, Surface Integrity for high speed machining of powder metallurgy superalloy FGH95, Shandong University (2011).

[10] J.T. Liu, Y.W. Zhang, Y. Tao, et al., Microstructure of FGH97 P/M superalloy, Trans. Mat. Heat Treat. 32 (2011) 47-51.

[11] S.B. Han, Y.W. Zhang, Y. Chi, et al. Effect of C and Hf on thermodynamic equilibrium phase precipitation in FGH97 PM superalloy, Powder. Metall. Ind. 19 (2009) 21-27.

[12] G.L. Chen, Study of high temperate alloy, Metallurgical Industry Press, Beijing, (1998).

[13] Y.H. Huang, Y.W. Zhang, F.M. Wang, et al., Effect of Hf on FGH97 P/M superalloy powders, Trans. Mat. Heat Treat. 33 (2012) 33-39.

[14] Y.H. Huang, Y.W. Zhang, F.M. Wang, et al. Effect of Hf on equilibrium precipitated phass and PPB in FGH P/M superalloy, Trans. Mat. Heat Treat. 33 (2012) 35-41.

[15] Y. Qiao, X. Ai, J. Zhao, Z.Q. Liu, Study on technology and tool materials for high speed machining superalloy, Tool Eng. 44 (2010) 3-6.

[16] Don Graham: Manufacturing Engineering 120 (1998), pp.64-67.

[17] Y. Qiao, X. Ai, Z.Q. Liu, J. Zhao, Study on technology and tool materials for high speed machining superalloy, J. Sichun Univ. (Engineering Science Edition) 42 (2010) 206-210.

[18] C.R. Zhu, P. Wang, C.T. Wang, Turning powder metallurgy parts, Mech. Eng. 42 (2003) 25-27.

[19] Y. Liu, H. T. Ye, J. Zhang, H. Mu: Aeronaut. Research on cutting status of Ni-based superalloy in aviation industry, Manuf. Technol. 14 (2011) 48-51.