Study on the Lubricating Performance of Nano-TiO2 in Water-Based Cold Rolling Fluid

Jian Lin Sun; Zuo Xin Zhu; Peng Fei Xu

doi:10.4028/www.scientific.net/MSF.817.219

Paper Titles

Effects of Rare Earth on Microstructure and Mechanical Properties of Al-3.2Mg Alloy
p.192

Analysis on the Influencing Factors of Heat Transfer for the Slot Nozzle Convection Impact in Rolled Strip Preposition Ultra-Fast Cooling
p.198

Adsorption Behavior of Thiadiazole as Corrosion Inhibitors on Copper Surface
p.204

Effect of Post-Welded Heat Treatments on Microstructure and Mechanical Properties of Friction Stir Welded Joints of 7A04-O Aluminum Alloy
p.212

Study on the Lubricating Performance of Nano-TiO₂ in Water-Based Cold Rolling Fluid
p.219

Investigation on the Corrosion Behavior of Emulsion on the Cold-Rolled Silicon Steel Surface
p.225

Effect of Heat Treatment Processing Parameters on the Microstructure and Properties of Low-Carbon Cr-Ni-Mo Carburizing Bearing Steels
p.231

Research on Microstructure and Properties of Base Metal and Weld of Electron Beam Welding 0.30C-Cr-W Steel
p.238

Microstructure and Tensile Deformation Behavior of a Hot-Rolled Directly Quenched and Dynamically Partitioned Steel Containing Proeutectoid Ferrite
p.246

HomeMaterials Science ForumMaterials Science Forum Vol. 817Study on the Lubricating Performance of Nano-TiO2...

Study on the Lubricating Performance of Nano-TiO₂ in Water-Based Cold Rolling Fluid

Abstract:

A type of water-based cold rolling fluid has been developed by adding TiO₂ nanoparticles. The tribological behavior of nanoTiO₂ water-based rolling fluid was investigated by using four-ball machine. The worn surfaces of the steel balls were analyzed by using OLYMPUS laser confocal microscopy. Results indicate that nanoTiO₂ nanoparticles significantly improved the anti-wear properties in the way of micro-ball bearing and perfecting the tribological behavior of water-based rolling fluid. The cold rolling experiment shows that the nanoTiO₂ water-based rolling fluid had a good rolling lubricant performance under the condition of concentration of 0.7wt.% for the upper limit. The nanoTiO₂ water-based rolling fluid can not only decrease the minimum rolling gauge and the surface roughness of the work piece, but also prevent direct contact between roller and work piece which could lead to the rolled surface scratches and adhesion defects.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Materials Science Forum (Volume 817)

Pages:

219-224

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.817.219

Citation:

Cite this paper

Online since:

April 2015

Authors:

Jian Lin Sun*, Zuo Xin Zhu, Peng Fei Xu

Keywords:

Cold Rolled Strip, Lubrication, Nano-TiO₂, Water-Based Rolling Fluid

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] J.L. Sun: The theory, technology and application of rolling lubrication . Metallurgical Industry Press, Beijing, (2010).

Google Scholar

[2] B. Zhang, B.S. Xu and Y. Xu: Research status of micro nanometer lubricating material in lubricant. Tribology. 31 (2011) 194-204.

Google Scholar

[3] Tarasov S, Kolubaev A and Belyaev S: Study of friction reduction by nanocopper additives to motor oil. Wear. 252(2002) 63-69.

DOI: 10.1016/s0043-1648(01)00860-2

Google Scholar

[4] W.M. Liu: The application of nanoparticals in lubricant oil. Tribology. 23 (2003) 265-267.

Google Scholar

[5] J. Guo, Y.J. Fan: The effect of lubricate nano addition on the engine cylinder wear. Science Technology and Engineering. 10 (2010) 8250-8252.

Google Scholar

[6] F.H. Wang, H. Zhu and B. Wang: The preparation of nano-Ni2S modified by oleic acid in situ synthesis and tribological performance. Functional Materials. 39(2008), 154-157.

Google Scholar

[7] X. Ji, Y. Chen and G. Zhao: Tribological properties of CaCO3 nanoparticles as an additive in lithium grease. Tribology letters. 41 (2011) 113-119.

DOI: 10.1007/s11249-010-9688-z

Google Scholar

[8] Kuppayee M, VanathiNachiyar G K and Ramasamy V: Synthesis and characterization of Cu2+ doped ZnS nanoparticles using TOPO and SHMP as capping agents. Applied Surface Science. 257(2011) 6779-6786.

DOI: 10.1016/j.apsusc.2011.02.124

Google Scholar

[9] G.X. Yu, M.B. Sun and X.L. Zhou: The preparation of water-solubility nano-CaCO3 and tribological performance. Acta Petrolei Sinica. 28 (2012) 137-142.

Google Scholar