Results of the Leaching, Water Absorption and Mold Release for Concrete Blocks with the Addition of the Concentration Tailings of Iron Ore

Article Preview

Abstract:

Tailings from the concentration of iron ore can be substituted in part for the production of concrete blocks due to the ability of encapsulation or enveloping the concrete. Many tests were conducted to recycle Concentration Tailings of Iron Ore for the Production of Concrete Block, replacing the silica sand. The Concentration Tailings of Iron Ore showed to be viable materials for the replacement of coarse and fine aggregate concrete blocks (pavers), with regard to mechanical strength after 28 days cure. Specifically, the simple substitution of hail for coarse tailings concentration of iron ore has the potential to increase the compression resistance of the concrete blocks. It was also verified that the addition of fine tailings with magnetic concentration may complicate demolding.The water absorption of the concrete block was obtained in accordance with the standards, and some blocks were within the required standards. And through the leaching test was observed that the addition of the tailings concrete blocks poses no risk to the environment when exposed to weather.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

549-552

Citation:

Online since:

June 2015

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2015 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] F.L. da Silva et al: Recycling of Concentration Tailings of Iron Ore for the Production of Concrete Block (Pavers), Materials Science Forum – (2014).

DOI: 10.4028/www.scientific.net/msf.775-776.631

Google Scholar

[2] M. Yellishetty, V. Karpe, E. H Reddy, K.N. Subhash, Reuse of iron ore mineral wastes in civil engineering construtions: A case study - Resources, Conservation and Recycling - 2008, Elsevier.

DOI: 10.1016/j.resconrec.2008.07.007

Google Scholar

[3] Silva, G.J. B, Estudo do Comportamento do Concreto de Cimento Portland produzido com Adição do Resíduo do Porcelanato, Dissertação de Mestrado, UFMG - (2005).

DOI: 10.11606/d.3.2008.tde-15082008-100223

Google Scholar

[4] F.L. Silva, Aproveitamento e Reciclagem de Resíduos de Concentração de Minério de Ferro na Produçãode Pavers e Cerâmica, Dissertação de Mestrado, UFOP – (2014).

Google Scholar

[5] ABNT- Associação Brasileira de Normas Técnicas, NBR 6136/(2007).

Google Scholar

[6] ABNT- Associação Brasileira de Normas Técnicas, NBR 10005/(2004).

Google Scholar