Effect of Combination of Admixture on the Development of Selected Properties of Concrete and their Comparison

Klára Křížová; Rudolf Hela

doi:10.4028/www.scientific.net/MSF.865.206

Paper Titles

Selected Factors Determining Appearing of Efflorescences on Facial Walls
p.183

Failure of Concrete at High Temperatures - The Influence of the Type of Cement
p.190

Energy Remediation Combining Insulation Materials Based on Calcium Silicate and Expanded Polymers
p.196

Utilization of Fly Ash in High Performance Floor Screed Based on Cement and its Influence on Physical Mechanical Properties
p.201

Effect of Combination of Admixture on the Development of Selected Properties of Concrete and their Comparison
p.206

Impact of Polysiloxanes of Various Chemical Structure on Water Vapour Permeability in Silicone Plasters Used in Building Renovation
p.211

Cement Based Heat-Insulating Materials for Use in Floor Constructions
p.224

Testing of Technological Properties of Foam Concrete
p.229

HomeMaterials Science ForumMaterials Science Forum Vol. 865Effect of Combination of Admixture on the...

Effect of Combination of Admixture on the Development of Selected Properties of Concrete and their Comparison

Abstract:

The paper is involved with effects of admixtures (fly ash, slag) and their combination on selected properties of ordinary concrete. The set of concrete covers seven different containing of Portland cement and approximately 10% of admixed slag and concrete with fly ash and slag contents up to 42 %. At early age of the concrete balanced values of compressive strength were obtained except the concrete with admixture combinations. And on the contrary at 28-day age the concrete with admixture combinations obtained comparable values like concrete with only one type of admixture. The compressive strength was monitored together with modulus of elasticity to 180-day age of the concrete. In the last phase the obtained values were compared with guide value where the slower development of theses parameters with applied admixtures was pointed out.

You might also be interested in these eBooks

Binders, Materials and Technologies in Modern Construction II

View Preview

Info:

Periodical:

Materials Science Forum (Volume 865)

Pages:

206-210

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.865.206

Citation:

Cite this paper

Online since:

August 2016

Authors:

Klára Křížová*, Rudolf Hela

Keywords:

Cement, Compressive Strength, Fly Ash, Modulus of Elasticity, Slag

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] K. Křížová: Studium závislostí složení betonů na hodnoty modulů pružnosti : disertační práce. Brno : Vysoké učení technické v Brně, Fakulta stavební, 2013. 154 s.

Google Scholar

[2] Bajza, A.; Rouseková, I. Technológia betónu. Bratislava : JAGA GROUP, s. r. o., 2006. 190 s. ISBN 80-8076-032-2.

Google Scholar

[3] Pavlík, A.; Doležel, J.; Fiedler, K. Technologie betonu. Praha : SNTL - Nakladatelství technické literatury, 1973. 322 p.

Google Scholar

[4] CSN EN 206 Concrete – Specification, performance, production and conformity, July (2014).

Google Scholar

[5] CSN EN 12350-2 Testing fresh concrete – Part 2: Slump-test, October (2009).

Google Scholar

[6] CSN ISO 6784 Concrete - Determination of static modulus of elasticity in compression.

Google Scholar

[7] EN 1992-1-1 Eurocode 2: Designing of Concrete Structures – Part 1-1: General Regulations for Civil Engineering.

Google Scholar