Simulation of Cooling Curves of the Heat Affected Zones of API 5L X80 Steel of Welds Made by Flux Core Arc Welding Self Protecting

Heronilton Mendes de Lira; Ricardo Arthur Sanguinetti Ferreira; Maurício David Martins das Neves; Maurílio José dos Santos; Severino Leopoldino Urtiga Filho; Oscar Olimpio Araújo Filho

doi:10.4028/www.scientific.net/MSF.869.649

Paper Titles

Study and Development of Advanced High Strength Steel to Automotive Industry Applications
p.625

The Influence of High Gravity in PbSn Eutectic Alloy
p.631

The Influence of Gravity on Eutectic PbSn Alloy Grown by the Vertical Bridgman Method
p.637

Displacement of the Ingnition Furnace in the Iron Ore Sintering with Re-Circulation of Waste Gases
p.643

Simulation of Cooling Curves of the Heat Affected Zones of API 5L X80 Steel of Welds Made by Flux Core Arc Welding Self Protecting
p.649

Evaluation of Green Corrosion Inhibitors for Applying in Food Packaging
p.657

Study of the Efficiency of Ag-SiO₂ Nanoparticles as Additives in Anticorrosion Coatings
p.663

Corrosion Behavior of Fe-Mn-Si-Cr-Ni-Co Shape Memory Stainless Steel in Highly Oxidizing Medium
p.669

Characterization of AISI 316L Stainless Steel Pattern via DC Plasma Nitriding
p.675

HomeMaterials Science ForumMaterials Science Forum Vol. 869Simulation of Cooling Curves of the Heat Affected...

Simulation of Cooling Curves of the Heat Affected Zones of API 5L X80 Steel of Welds Made by Flux Core Arc Welding Self Protecting

Abstract:

The simulation of cooling curves of the heat affected zones (HAZ) of API 5L X80 steel was based on the cooling rates of welds made by the process named FCAW-S (Flux Core Arc Welding Self-Protecting). The specimens were analyzed by macroscopy, light microscopy (LM) and scanning electronic microscopy (SEM) to investigate the effects of cooling conditions on the tensile test and Vickers hardness. A thermo-mechanical simulator showed be able to reproduce the different thermodynamics conditions of points in the HAZ and allowed the reproduction of the thermal cycle obtained by welds were applied to the specimens of API 5l X80 steel. The values of the yield strength, ultimate strength and hardness found in the specimens were lower than those presented by the material as received.