Internal Coating of Oil Refining Pipes with Alumina from the Recycling Process of Aluminum Anodizing

M.F. de Carvalho; Andréa Gonçalves de Sousa; Rebeka Oliveira Domingues; Rogério Pontes de Araújo; Ricardo Arthur Sanguinetti Ferreira; Yogendra Prasad Yadava

doi:10.4028/www.scientific.net/MSF.881.367

Paper Titles

Concrete Production of Hot Asphalt Using Recycled Aggregates CDW
p.346

Evaluation of Incorporation of Dregs in Mortar Production in Replacement of Hydrated Lime
p.351

Permeability of Porous Ceramic Membranes Obtained from Waste of the Coal Extraction Process
p.357

Incorporation of Paint Waste from Furniture Painting Booth into Covering Mortar
p.362

Internal Coating of Oil Refining Pipes with Alumina from the Recycling Process of Aluminum Anodizing
p.367

Geopolymer Obtention Using Calcined Rice Husk Ash
p.373

Evaluation of Physical Parameters of a Clay with the Incorporation of Industrial Ash Waste by Means of Variance Analysis
p.379

Use of Sugarcane Bagasse Ashes as Raw Material in the Replacement of Fluxes for Applications on Porcelain Tile
p.383

Feasibility Study of Zirconia Waste Recycling Obtained during the Machining of Single and Multiple Dental Prosthesis
p.387

HomeMaterials Science ForumMaterials Science Forum Vol. 881Internal Coating of Oil Refining Pipes with...

Internal Coating of Oil Refining Pipes with Alumina from the Recycling Process of Aluminum Anodizing

Abstract:

The aluminum anodizing is a used technique used to produce decorative and protective film of high quality. This anodizing process results in a large volume of industrial sludge, containing amounts of aluminum hydroxide colloidal problematic for these industrial waste disposal due to the environmental impact. This study aims to accomplish the treatment of these residues, which were thermally sintered at temperatures of 200 °C, 1000 °C and 1400 °C. After the heat treatment, the residues were subjected to analysis of X-ray diffraction and X-ray fluorescence. In evaluating these results, there was a gradual increase of the percentage of alumina at 1400 °C to achieve 95%. With the acquisition of the ceramic high alumina content, the objective is the fabrication of refractory linings for pipes used in the oil refining process. And this study will serve to solve an environmental problem arising from the metallurgical industry and simultaneously presenting an alternative material for the industry.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Materials Science Forum (Volume 881)

Pages:

367-372

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.881.367

Citation:

Cite this paper

Online since:

November 2016

Authors:

M.F. de Carvalho, Andréa Gonçalves de Sousa, Rebeka Oliveira Domingues, Rogério Pontes de Araújo, Ricardo Arthur Sanguinetti Ferreira, Yogendra Prasad Yadava

Keywords:

Alumina, Anodizing Industry, Industrial Waste, Reusing

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Associação Brasileira de Normas Técnicas. Resíduos sólidos. Rio de Janeiro: ABNT2004. (NBR-10004).

Google Scholar

[2] K.W. Bieniek, R. Marx: Schweiz Monatsch Zahnmed Vol. 104 (3) (1994), p.284.

Google Scholar

[3] H.C. Caputo: Mecânica dos Solos e suas Aplicações. (Revista e Ampliada MEC 3ª ed. vol. 1 Rio de Janeiro, 1973).

Google Scholar

[4] C.T. Kniess. Desenvolvimento e caracterização de materiais cerâmicos com adição de cinza pesadas de carvão mineral. Doutorado (Tese). Florianópolis, 2005. Universidade Federal de Santa Catarina (UFSC). (SC).

DOI: 10.5196/physicae.v11i11.311

Google Scholar

[5] Metals Handbook. Corrosion. (ASM International 9 ed, v. 13 1987).

Google Scholar

[6] P.F. Silva. Introdução à Corrosão e Proteção das Superfícies Metálicas. (Imprensa Universitária UFMG Belo Horizonte, 1981).

Google Scholar

[7] D. A Skoog, F.J. Holler, S.R. Crouch. Princípios de Análise Instrumental. (Editora Bookman Companhia Artmed, 2006).

Google Scholar