Activated Carbon Production Through Co-Pyrolysis of Vacuum Residue and Dehydrated Castor Oil

Article Preview

Abstract:

Crude oil refineries in Indonesia produce waste in the vacuum distillation as vacuum residue and utilization is still low. Vacuum residue contains high aromatics which can be utilized as raw material to produce activated carbon. Such a activated carbon is widely used as electric double-layer capacitors. Vacuum residue was mixed with dehydrated castor oil as conjugated double bond source, then followed by pyrolysis at heating rate of 5°C/min until 450°C and holding time at 450°C for 90 minutes. The amount of dehydrated castor oil added to vacuum residue was varied at 0 wt%, 5wt%, 10 wt%, and 15 wt% of vacuum residue. Co-pyrolysis of vacuum residue and dehydrated castor oil reduce C/H atomic ratio precursors, from 1.82 to 1.50, 1.48, and 1.45 and used as a precursor of activated carbon. The activation was conducted by activating the precursor with KOH solution and followed by carbonization at heating rate of 5°C/min until 700°C and holding time at 700°C for 30 minutes. The results show that the addition of castor oil improved pore surface area from 150.32 m2/g to 236.97, 290.99, and 357.78 m2/g, respectively, and also have high crystallinity structures, so they may be used as active materials in capacitors.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

73-79

Citation:

Online since:

April 2020

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2020 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] Kumar, S., Srivastava, M. (2017). Meliorate Optical Textures and Mesophase Contents by Promising Approach of Deasphalting of Petroleum Residues. Journal of Industrial and Engineering Chemistry,48, 133–141.

DOI: 10.1016/j.jiec.2016.12.031

Google Scholar

[2] Kumar, A. and Jena, H. (2016). 2016. Preparation and characterization of high surface area activated carbon from Fox nut (Euryale ferox) shell by chemical activation with H3PO4. Results in Physics. Department of Chemical Engineering, National Institute of Technology (NIT), Rourkela 769008, Orissa, India.

DOI: 10.1016/j.rinp.2016.03.006

Google Scholar

[3] Lin, Q., Su, W.., Xie, Y. (2009). Effect of Rosin to Coal-tar Pitch on Carbonization Behaviour and Optical Texture of Resultans Semi-Cokes. Journal of Analytical and Applied Pyrolysis, 86, 8-13.

DOI: 10.1016/j.jaap.2009.03.001

Google Scholar

[4] Philippaerts, A., Aelst, J. and Sels, B. (2013). Conjugated linoleic acids and conjugated vegetable oils: From nutraceutical to bio-polymer. European Journal of Lipid Science and Technology, 115(7), pp.717-720.

DOI: 10.1002/ejlt.201300101

Google Scholar

[5] Zeng, C., et al. (2013). Preparation and Characterization of High Surface Area Activated carbons from Co-pyrolysis Product of Coal-tar Pitch and Rosin. Journal of Analytical and Applied Pyrolysis, 104, 372–377.

DOI: 10.1016/j.jaap.2013.06.010

Google Scholar

[6] Bolley, Don S. (1955). Dehydrated castor oil. The Journal of American Chemist Society, 36, 518–523.

Google Scholar

[7] Yan, Jie. et al. (2016). Formation of conjugated double bonds in soybean oil with iodine as a catalyst. Journal of The Serbian Chemical Society. 81 (2), 141-151.

Google Scholar

[8] Kadamne, J., Jain, V., Saleh, M. and Proctor, A. (2009). Measurement of Conjugated Linoleic Acid (CLA) in CLA-Rich Soy Oil by Attenuated Total Reflectance−Fourier Transform Infrared Spectroscopy (ATR−FTIR). Journal of Agricultural and Food Chemistry, 57(22), pp.10483-10488.

DOI: 10.1021/jf902445v

Google Scholar

[9] Tekinalp, Halil. (2011). Pitch-Based Activated Carbon Fibers: The Effect of Precursor Composition on Pore Structure. All Dissertations. Paper 874.

Google Scholar