Static Softening Behavior of Low Carbon High Niobium Microalloyed Steel

Article Preview

Abstract:

The MMS-200 thermal simulation testing machine was used to study the static softening behavior of low carbon high niobium microalloyed steel. The effect of niobium to the static recrystallization softening behavior of the microalloy steel had been analyzed by establishing the kinetics model of static recrystallization and the micro-morphology of precipitates. The results indicated that: the static softening behavior of the tested steel significantly influenced by the deformation temperature and the interval pass time of the rolling processing. At relatively high deformation temperature and long interval pass time, the ratio of static softening was increased. Then the deformation temperature was lower to 950°C, and the static softening behavior of the test steel was ceased. But when the deformation temperature was higher than 1000°C, the static softening behavior of the test steel completely occurred. The activation energy of the test steel was 325·mol-1 by the established model calculated.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

36-43

Citation:

Online since:

May 2020

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2020 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] Sun Hong: Welded Pipe and Tube Vol.40,No 9(2017),pp.62-68.

Google Scholar

[2] Li Guang, Li Xueping, Xu Xueli, et al:Mechanical engineering materials Vol.39, No 12(2015),pp.80-83.

Google Scholar

[3] Chen You:Thermal simulation study on structure and properties of HAZ of high strength pipeline steel.Jiangsu University(2016).

Google Scholar

[4] Huang Jingpeng, Xu Xueli, Wang Hongduo:Welded pipe Vol.39, No 8(2016),pp.19-22.

Google Scholar

[5] Chen Xiaowei, Wang Xu, Li Guopeng, et al:Steel pipe Vol.45, No 5(2016),pp.1-8.

Google Scholar

[6] Wang Liangmou, Jia Shujun, Liu Qingyou, et al:Mechanical engineering materials Vol.40 (2016),pp.102-106.

Google Scholar

[7] Lin Yongcheng, Chen Mingsong, Zhong Jue: Journal of Zhongnan University (Natural Science Edition) Vol.40,No 2(2009),pp.411-416.

Google Scholar

[8] Wang Jiafu, Wang Yuexiang, Hua Fuan, et al: Journal of Iron and Steel Research Vol.23,No 9(2011),pp.46-49.

Google Scholar

[9] Yu chong:Study on Dynamic Recrystallization and Static Recrystallization Behavior of 50CrV Steel.Wuhan University of Science and Technology(2013).

Google Scholar

[10] Cao Yabin:Study on dissolution/precipitation of Nb in high Nb microalloyed steel and its effect on microstructure evolution.Yanshan University(2012).

Google Scholar

[11] Miao Chengliang:Physical Metallurgical Phenomena and Technological Principles of High-grade Pipeline Steel.Beijing University of Science and Technology(2011).

Google Scholar

[12] Xia Dianxiu:Study on Technology of X90/X100 Pipeline Steel with Multiphase Microstructure .Beijing University of Science and Technology(2013).

Google Scholar

[13] MEDINA S F, MANCILLA J E:Transaction of the Iron & Steel Institute of Japan Vol.33,No 12(1993),p.1257.

Google Scholar

[14] SELLARS C M, WHITEMEN J A:Metal Science Vol.13,No 3(1979),pp.187-194.

Google Scholar