Development of Multifunctional Composites Based on Ultrahigh Molecular Weight Polyethylene

Abstract:

The present study investigates the influence of carbon fibers of «Belum» brand on the performance properties of polymer composites based on ultrahigh-molecular weight polyethylene. It was established that the composite complex with the content of carbon fibers in the amount of 5 wt.% has the optimum complex of properties. The rate of mass wear is reduced by 3.3 times while maintaining the physical and mechanical characteristics at the level of the original polymer. It was established that the creep of PCM with the composition of UHMWPE + 5 wt.% Belum is 2 times less than the initial polymer. Also, the properties of the developed material based on UHMWPE were compared with unfilled and modified polytetrafluoroethylene (PTFE). It is shown that the creep of UHMWPE is less than the creep of PTFE by 12.5 times. The creep of the composite based on UHMWPE is less than the creep of the composite based on PTFE 13 times.

• Periodical: Materials Science Forum (Volume 992)
• Pages: 398-402
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.992.398
• Online since: May 2020
• Authors: O.V. Gogoleva*, P.N. Petrova, E.S. Kolesova
• Keywords: Carbon Fibers, Coefficient of Friction, Creep, Mechanical Properties, Physical Properties, Polymer Composite Materials, Ultrahigh-Molecular Weight Polyethylene, Wear Resistance

References

[1] V.S. Cherednichenko, Materials Science. Technology of construction materials (Moscow: Electrical Engineering, Electrical Engineering and Electrical Technology), (2006).

[2] A.E. Raskutin, Strategija razvitija polimernyh kompozicionnyh materialov Aviacionnye materialy i tehnologii. (2017) 344-348.

[3] E.G. Seljutin, Ju.Ju. Gavrilov, E.N. Voskresenskaja, V.A. Zakharov, V.E. Nikitin, V.A. Polubojarov, Kompozicionnye materialy na osnove sverhvysokomolekuljarnogo polijetilena: svojstva, perspektivy ispol'zovanija Himija v interesah ustojchivogo razvitija. 18 (2010) 375-388.

[4] S.N. Danilova, A.A. Okhlopkova, A.A. Gavril'yeva, T.A. Okhlopkova, R.V. Borisova, A.A. D'yakonov, Iznosostoykiye polimernyye kompozitsionnyye materialy s uluchshennym mezhfazovym vzaimodeystviyem v sisteme «polimer – volokno» Vestnik Severo-Vostochnogo federal'nogo universiteta im. M.K. Ammosova. 5 (2016) 80-92.

[5] I.A. Barvinskiy, I.E. Barvinskaya, Spravochnik po lit'yevym termoplastichnym materialam, Svoystva, primery primeneniya, pererabotka, torgovyye marki, izgotoviteli. Spravochnik na CD. Versiya 1.3. Inzhenernaya firma «AB Universal», (2004).

[6] O.A. Ammosova, A.G. Argunova, G.V. Botvin, O.N. Burenina, S.V. Vasil'yev, M.A. Vasil'yeva, O.V. Gogoleva, M.L. Davydova, E.V. Danzanova, V.E. Kopylov, P.N. Petrova, E.S. Petukhova, M.E. Savvinova, M.D. Sokolova, A.L. Fedorov, A.R. Khaldeyeva, A.A. Khristoforova, N.V. Shadrinov, Modifitsirovannyye polimernyye i kompozitsionnyye materialy dlya severnykh usloviy (Novosibirsk: Izd-vo SO RAN), (2017).

[7] E.S. Petukhova, Polietilenovyye kompozity s poverkhnostno-obrabotannymi bazal'tovymi i uglerodnymi voloknami Voprosy materialovedeniya. 3 (2017) 148-156.

[8] V.M. Buznik, E.N. Kablov, Sostojanie i perspektivy arkticheskogo materialovedenija Vestnik Rossijskoj akademii nauk. 87 (2017) 827-839.

[9] E.N. Kablov, Tendentsii i oriyentiry innovatsionnogo razvitiya Rossii, M.: Izd-vo VIAM, (2015).

[10] S.V. Panin, V.E. Panin, L.A. Korniyenko, T. Puvadin and others, Modifitsirovaniye sverkhvysokomolekulyarnogo polietilena (SVMPE) nanonapolnitelyami dlya polucheniya antifriktsionnykh kompozitov, Izvestiya VUZov. Khimiya i khimicheskaya tekhnologiya. 54 (2011) 102-106.

[11] A.A. Okhlopkova, P.N. Petrova, O.V. Gogoleva, Iznosostoykiye kompozitsionnyye materialy na osnove sverkhvysokomolekulyarnogo polietilena dlya ekspluatatsii v ekstremal'nykh usloviyakh, Materialovedeniye. 9 (2011) 10-13.

[12] O.V. Gogoleva, P.N. Petrova, E.S. Kolesova, Development of Polymer Composite Materials Based on Ultrahigh-Molecular Weight Polyethylene and Carbon Fillers Materials Science Forum. 945 (2019) 362-368.

DOI: 10.4028/www.scientific.net/msf.945.362

[13] O.V. Gogoleva, P.N. Petrova and E.S. Kolesova, Issledovaniye vliyaniya uglerodnykh volokon na svoystva i strukturu kompozitov na osnove sverkhvysokomolekulyarnogo polietilena Trudy VIII Yevraziyskogo simpoziuma po problemam prochnosti materialov i mashin dlya regionov kholodnogo klimata, EURASTRENCOLD II. (2018) 101-108.

DOI: 10.17223/9785946217408/270

[14] S.V. Panin, L.A. Korniyenko, S. Vannasri, S. Piriyaon, T. Puvadin and others, Vliyaniye mekhanicheskoy aktivatsii, ionnoy implantatsii i tipa napolniteley na formirovaniye plenki perenosa pri tribosopryazhenii kompozitov na osnove SVMPE, Mekhanika kompozitnykh materialov. 47 (2011) 727-738.

[15] D.I. Chukov, Formirovaniye struktury i svoystv kompozitsionnykh materialov na osnove sverkhvysokomolekulyarnogo polietilena, armirovannykh uglerodnymi voloknami: avtoreferat dis. kandidata tekhnicheskikh nauk: 05.16, Moskva, (2013).

[16] K.A. Abdulkhakov, V.M. Kotlyar, K voprosu o polzuchesti polimernykh i kompozitnykh materialov, Vestnik Kazanskogo tekhnologicheskogo universiteta. 8 (2011) 102-107.

[17] I.P. Nikolayeva, L.I. Ogorodov, S.V. Krasikov, Polzuchest' polietilena vysokoy prochnosti pri razlichnykh rezhimakh nagruzheniya, Stroitel'stvo unikal'nykh zdaniy i sooruzheniy. 12 (2014) 49-63.

[18] S.A. Khatipov, N.A. Artamonov, Sozdaniye novogo antifriktsionnogo i uplotnitel'nogo materiala na osnove radiatsionno-modifitsirovannogo politetraftoretilena, Rossiy-skiy khimicheskiy zhurnal. 52 (2008) 89–97.

[19] X.B. Shi, C.L. Wu, M.Z. Rong, T. Czigany, W.H. Ruan, M.Q. Zhang, Improvement of creep resistance of polytetra-fluoroethylene films by nano-inclusions, Chinese Journal of Polymer Science. 31 (2013) 377−387.

DOI: 10.1007/s10118-013-1225-8

[20] V.P. Radchenko, M.N. Saushkin, Polzuchest' i relaksatsiya ostatochnykh napryazheniy v uprochnonnykh konstruktsiyakh (Moscow: Mashinostroyeniye), (2005).

[21] T. J. B. Taweel, E. Sokolova, V. Sergeev, D. B. Solovev, Energy and Exergy Analysis of Clinker Cooler in the Cement Industry. IOP Conference Series: Materials Science and Engineering. 463 (2018) paper № 032101. [Online]. Available: https://doi.org/10.1088/1757-899X/463/3/032101.

DOI: 10.1088/1757-899x/463/3/032101