The Study of the Destruction of Pipelines, Subject to Stress Corrosion Cracking

Article Preview

Abstract:

Stress corrosion cracking (SCC) is one of the reasons of failure of main gas pipelines. SCC appears in the form of the single and multiple cracks arising on an outer surface of a pipe. In work different types of the analysis of destruction of the pipeline having multiple cracks are presented. For the purpose of studying of a number of features of SCC by authors various researches were conducted: electrochemical researches, potentiodynamic measurements at various temperatures. With the help of potentiometric studiesit is shown that at low temperatures process of formation of a passive film is at a loss, however, with temperature increase processes of oxidation of metals proceed much quicker, at the same time decrease of their thermodynamic opportunity is observed. The nature of temperature effect is defined on oxidation rate of metals by temperature dependence of a kinetic constant of chemical reaction that is expressed by the Arrhenius equation.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

695-699

Citation:

Online since:

May 2020

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2020 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] O.A. Nasibullina, A.G. Gareev, R.G. Rizvanov, Investigation of the hydrogen stratification of the metal of the active gas pipeline, Solid State Phenomena. 284 (2018) 1302-1306.

DOI: 10.4028/www.scientific.net/ssp.284.1302

Google Scholar

[2] I.G. Abdullin, A.G. Gareev, Corrosion fatigue durability of pipe steel in carbonate-bicarbonate media, Fiziko-Khimicheskaya Mekhanika Materialov. 29 № 5 (1993) 97-98.

DOI: 10.1007/bf00558780

Google Scholar

[3] A.S. Tyusenkov, Chemical resistance of steel 13CrV (rus 13ХФА), Steel. 2 (2016) 53-57.

Google Scholar

[4] A.S. Tyusenkov, A.V. Rubtsov, R.R. Tlyasheva, Heat Resistance of Certain Structural Steels, Solid State Phenomena. 265 (2017) 868-872.

DOI: 10.4028/www.scientific.net/ssp.265.868

Google Scholar

[5] O.A. Nasibullina, A.G. Gareev, Destruction patterns of X70 steel sample, possessing cracks of corrosion-mechanical origin, under cyclic loading, Materials Science Forum. 946 (2019) 20-24.

DOI: 10.4028/www.scientific.net/msf.946.20

Google Scholar

[6] R.G. Rizvanov, R.G. Abdeev, N.L. Matveev, R.G. Ryskulov, A.I. Shenknekht A.F. Insafutdinov, Effect of the geometry of the shell/elliptical-bottom contact zone on the stress state of pressure vessels, Chemical and Petroleum Engineering. 36 (2000) 3.

DOI: 10.1007/bf02463460

Google Scholar

[7] I.R. Kuzeev, I.G. Ibragimov, M.I. Bayazitov, S.N. Davydov, I.R. Khairudinov, Steel corrosion prevention in coking residual petroleum stocks, Chem. and Technology of Fuels and Oils. 22 № 3 (1985) 111-113.

DOI: 10.1007/bf00726125

Google Scholar

[8] A.G. Gareev, O.A. Nasibullina, R.G. Rizvanov, Study of corrosion cracking of main gas and oil pipelines, Oil and gas business: electronic scientific journal. №6 (2012) 126-146. URL: http://ogbus.ru/authors/Gareev/Gareev_2.pdf.

DOI: 10.17122/ogbus-2019-1-234-246

Google Scholar

[9] A.S. Tyusenkov, S.E. Cherepashkin, Scale Inhibitor for Boiler Water Systems, Russian J. of Applied Chem. 87 № 9 (2014) 1240−1245.

DOI: 10.1134/s1070427214090080

Google Scholar

[10] R.G. Rizvanov, D.Sh. Mulikov, D.V. Karetnikov, A.M. Fairushin, A.S. Тokarev, Evaluation of the Possibility of Obtaining Tube-to-Tube Sheet Welded Joints of 15Cr5Mo Steel by Alternative Technological Process, 4th International Conference on Advanced Engineering and Technology (4th ICAET) IOP Publishing IOP Conf. Series: Materials Science and Engineering. 317 (2018) 01207.

DOI: 10.1088/1757-899x/317/1/012077

Google Scholar

[11] D.V. Karetnikov, R.G. Rizvanov, A.M. Fairushin, K.S. Kolokhov, Increasing the reliability of oil and gas equipment working in the conditions of steep temperature gradients, Welding International. 27 № 7 (2013) 557-560.

DOI: 10.1080/09507116.2012.715949

Google Scholar

[12] M.Z. Zaripov, A.M. Fairushin, D.V. Karetnikov, Conditions of Possible Application of Vibration Processing in the Course of Welding, Materials Science Forum. 946 (2019) 883-888.

DOI: 10.4028/www.scientific.net/msf.946.883

Google Scholar

[13] D. S. Skorikov, D. B. Solovev, Consideration of an Ecosystem From the Standpoint of Theory and Practice of Managing Production Systems. IOP Conference Series: Materials Science and Engineering. 463 (2018) Paper № 022003. [Online]. Available: https://doi.org/10.1088/1757-899X/463/2/022003.

DOI: 10.1088/1757-899x/463/2/022003

Google Scholar