Effects of Complex Fillers on the Mechanical and Tribological Properties of Polytetrafluoroethylene Composites

Article Preview

Abstract:

This work is devoted to studying the impact of carbon fibers with vermiculite and ultrafine polytetrafluoroethylene on the structure and properties of polytetrafluoroethylene. The mechanical and tribological characteristics of composites based on PTFE was compared depending on the content of carbon fibers. The yield strength and compressive strength improvement with increase of contents carbon fibers of the PTFE was showed. The method of X-ray analysis showed that with by introducing of complex fillers in the PTFE leads to the increasing the degree of crystallinity. PTFE-based composites reinforced complex fillers have shown a significant improvement in wear resistance compared to initial polymer. The study of the worn surface using scanning electron microscopy and IR spectroscopy to describe the tribological behavior of PTFE-based composites was carried out. Using IR spectroscopy, it was revealed that in the process of friction on the worn surface of PTFE-based composites products of tribo-oxidation are formed. It has been established that in the friction process of polymer composite materials, secondary structures are formed on the friction surface of the material, which protects the material from abrasion.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

739-744

Citation:

Online since:

May 2020

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2020 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] S. Sharma, J. Bijwe, S. Panier, Exploration of potential of Zylon and Aramid fibers to enhance the abrasive wear performance of polymers, Wear. 422–423 (2019) 180–190.

DOI: 10.1016/j.wear.2019.01.068

Google Scholar

[2] W. Luo, Q. Liu, Y. Li, S. Zhou, H. Zou, M. Liang, Enhanced mechanical and tribological properties in polyphenylene sulfide/polytetrafluoroethylene composites reinforced by short carbon fiber, Composites Part B: Engineering. 91 (2016) 579–588.

DOI: 10.1016/j.compositesb.2016.01.036

Google Scholar

[3] E. Dhanumalayan, G.M. Joshi, Performance properties and applications of polytetrafluoroethylene (PTFE)—a review, Advanced Composites and Hybrid Materials. 1 (2018) 247–268.

DOI: 10.1007/s42114-018-0023-8

Google Scholar

[4] A. Harnoy, Bearing Design in Machinery: Engineering Tribology and Lubrication, CRC Press, (2002).

Google Scholar

[5] H. Unal, A. Mimaroglu, U. Kadıoglu, H. Ekiz, Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions, Materials & Design. 25 (2004) 239–245.

DOI: 10.1016/j.matdes.2003.10.009

Google Scholar

[6] M.E. Makowiec, T.A. Blanchet, Improved wear resistance of nanotube- and other carbon-filled PTFE composites, Wear. 374–375 (2017) 77–85.

DOI: 10.1016/j.wear.2016.12.027

Google Scholar

[7] T.A. Blanchet, F.E. Kennedy, Sliding wear mechanism of polytetrafluoroethylene (PTFE) and PTFE composites, Wear. 153 (1992) 229–243.

DOI: 10.1016/0043-1648(92)90271-9

Google Scholar

[8] C. Pan, K. Kou, Y. Zhang, Z. Li, G. Wu, Enhanced through-plane thermal conductivity of PTFE composites with hybrid fillers of hexagonal boron nitride platelets and aluminum nitride particles, Composites Part B: Engineering. 153 (2018) 1–8.

DOI: 10.1016/j.compositesb.2018.07.019

Google Scholar

[9] V.N. Aderikha, A.P. Krasnov, A.V. Naumkin, V.A. Shapovalov, Effects of ultrasound treatment of expanded graphite (EG) on the sliding friction, wear resistance, and related properties of PTFE-based composites containing EG, Wear. 386–387 (2017) 63–71.

DOI: 10.1016/j.wear.2017.04.022

Google Scholar

[10] X.H. Cheng, Q.Q. Shang-guan, Effect of rare earths on mechanical and tribological properties of carbon fibers reinforced PTFE composite, Tribology Letters. 21 (2006) 153–160.

DOI: 10.1007/s11249-006-9033-8

Google Scholar

[11] Q. Shangguan, X. Cheng, Investigation on mechanism of the improvement in tribological properties of carbon fiber reinforced polytetrafluoroethylene composites by surface treatment, Journal of Shanghai Jiaotong University (Science). 17 (2012) 490–493.

DOI: 10.1007/s12204-010-1083-2

Google Scholar

[12] V.A. Shelestova, S.F. Zhandarov, S.G. Danchenko, P.N. Grakovich, Surface modification of carbon fiber by fluoropolymer in a low-temperature plasma, Inorganic Materials: Applied Research. 6 (2015) 219–224.

DOI: 10.1134/s2075113315030107

Google Scholar

[13] A.A. Pitenis, K.L. Harris, C.P. Junk, G.S. Blackman, W.G. Sawyer, B.A. Krick, Ultralow Wear PTFE and Alumina Composites: It is All About Tribochemistry, Tribology Letters. 57 (2015).

DOI: 10.1007/s11249-014-0445-6

Google Scholar

[14] S.S. Kandanur, M.A. Schrameyer, K.F. Jung, M.E. Makowiec, S. Bhargava, T.A. Blanchet, Effect of Activated Carbon and Various Other Nanoparticle Fillers on PTFE Wear, Tribology Transactions. 57 (2014) 821–830.

DOI: 10.1080/10402004.2014.916374

Google Scholar

[15] F. Song, Q. Wang, T. Wang, Effects of glass fiber and molybdenum disulfide on tribological behaviors and PV limit of chopped carbon fiber reinforced Polytetrafluoroethylene composites, Tribology International. 104 (2016) 392–401.

DOI: 10.1016/j.triboint.2016.01.015

Google Scholar

[16] Y.K. Mashkov, A.S. Ruban, E.A. Rogachev, O.V. Chemisenko, PTFE-nanocomposites structure and wear-resistance changing in various methods of structural modification, Journal of Physics: Conference Series. 944 (2018) 012078.

DOI: 10.1088/1742-6596/944/1/012078

Google Scholar

[17] B. Jiang, A. Zhu, C. Zhang, Y. Li, Interface enhancement between polytetrafluoroethylene and glass fibers modified with a titanate coupler, Journal of Applied Polymer Science. 134 (2017).

DOI: 10.1002/app.44668

Google Scholar

[18] A.P. Vasilev, T.S. Struchkova, L.A. Nikiforov, A.A. Okhlopkova, P.N. Grakovich, E.L. Shim, J.-H. Cho, Mechanical and Tribological Properties of Polytetrafluoroethylene Composites with Carbon Fiber and Layered Silicate Fillers, Molecules. 24 (2019) 224.

DOI: 10.3390/molecules24020224

Google Scholar

[19] S.A. Sleptsova, A.A. Okhlopkova, Iu.V. Kapitonova, N.N. Lazareva, M.M. Makarov, L.A. Nikiforov, Spectroscopic study of tribooxidation processes in modified PTFE, Journal of Friction and Wear. 37 (2016) 129–135.

DOI: 10.3103/s106836661602015x

Google Scholar

[20] A.P. Vasilev, A.A. Okhlopkova, T.S. Struchkova, P.N. Grakovich, A.L. Bashlakova, Investigation of the Influence of Complex Fillers on the Properties and Structure of Polytetrafluoroethylene, Journal of Friction and Wear. 39 (2018) 427–432.

DOI: 10.3103/s1068366618050148

Google Scholar