Preparation of MgB2 Rods Using a PIT Technique with the Explosive Consolidation Method

Natalia Orlińska; Józef M. Paszula; Zygmunt Wokulski; Grzegorz Dercz

doi:10.4028/www.scientific.net/SSP.130.229

Paper Titles

A Comparative Study of the Structure and Properties of Zinc Coatings Deposited with Various Methods
p.207

Nanoindentation of GaAs (001) Surface. A Molecular Dynamics Study
p.213

Dependence of Structural Evolution an Hydrogen Storage Mechanism on Milling Parameters during controlled Reactive Milling of Graphite in Hydrogen
p.219

Microstructural Studies on the Q-Phase in Alumina Cement Clinker
p.225

Preparation of MgB₂ Rods Using a PIT Technique with the Explosive Consolidation Method
p.229

Preparation of Co_1-xFe_xSi₂ Solid Solution Crystals
p.233

Crystalline Microstructure of Zinc Oxide Powder Sintered into Varistor Body
p.237

Polycrystalline Compounds Cd_1-xNi_xCr₂Se₄ Obtained by Ceramic Technology
p.241

Cini-Sawatzky's Model in Studies of Electrodeposited Ni-Mo Alloys with Polymers
p.245

HomeSolid State PhenomenaSolid State Phenomena Vol. 130Preparation of MgB2 Rods Using a PIT Technique...

Preparation of MgB₂ Rods Using a PIT Technique with the Explosive Consolidation Method

Abstract:

It was successfully prepared superconducting MgB2 rods with two double arrangements of tubes such as: Cu/Fe and Steel/Cu by the modified Powder-In-Tube (PIT) technique with explosive consolidation method. The metallographic observations and X-ray phase analysis of the obtained MgB2 rods were performed. These studies show that this type of consolidation permits to obtain MgB2 rods free from any voids and new phases.