Casting and Heat Treatment of Turbocharger Impellers Thixocast from Alloy 201

Abstract:

Commercial semi-solid cast impellers are produced from Al-Si-Cu alloys heat treated to the T6 temper. The study described in this paper involved the identification of casting and heat treatment parameters to produce semi-solid processed turbocharger impellers from a silicon-free, higher strength 201 alloy. Casting parameters were identified which minimized hot tearing in the alloy 201 impellers. A series of heat treatment studies were performed to determine optimum heat treatment parameters. The T71 temper was identified as the preferred heat treatment condition to produce high strength as well as superior elongation. The results from mechanical property measurements conducted on the T71 heat treated impellers are reported. Optical and scanning electron microscopy (SEM) were also used to characterize the microstructure of alloy 201 impellers before and after heat treatment, and representative microstructures are presented.

• Periodical: Solid State Phenomena (Volumes 192-193)
• Pages: 556-561
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.192-193.556
• Online since: October 2012
• Authors: Qiang Zhu, Stephen P. Midson, Chang Wei Ming, Helen V. Atkinson
• Keywords: Alloy 201, Heat Treatment, Impeller, T71, Thixoform

References

[1] G. Wallace, A.P. Jackson, S.P. Midson, Q. Zhu, High-Quality Aluminium Turbocharger Impellers Produced by Thixocasting, Trans. Non-Ferrous Metals Society of China 20 (2010) 1786-91.

DOI: 10.1016/s1003-6326(09)60375-7

[2] G. Wallace, A.P. Jackson, S.P. Midson, Novel Method for Casting High Quality Aluminum Turbocharger Impellers, SAE 2010 World Congress, paper number 2010-04-12.

DOI: 10.4271/2010-01-0655

[3] Q. Zhu and S.P. Midson, Semi-solid moulding: a competition to cast and machine from forging in making automotive complex components, Trans. Non-Ferrous Metals Society of China 20 (2010) 1042-1047.

DOI: 10.1016/s1003-6326(10)60628-0

[4] D. Liu, H.V. Atkinson, P. Kapranos, W. Jirattiticharoean, H. Jones, Microstructural Evolution and Tensile Mechanical Properties of Thixoformed High Performance Aluminium Alloys, Mater. Sci. Engng. A 361 (2003) 213-24.

DOI: 10.1016/s0921-5093(03)00528-8

[5] D. Liu, H.V. Atkinson, P. Kapranos, H. Jones, Effect of heat treatment on properties of thixoformed high performance 2014 and 201 aluminium alloys, J. Mater. Sci. 39 (2004) 99-105.

DOI: 10.1023/b:jmsc.0000007732.04363.81

[6] P. Ashtari, G. Birsan, S. Shankar, Favorable Alloy Compositions and Melt Temperatures to Cast 2XXX and 7XXX Al Alloys by Controlled Diffusion Solidification (CDS), Shape Casting: Third International Symposium, Ed: J. Campbell, P. Crepeau & M. Tiryakioglu, Pub: TMS, ISBN: 978-0-87339-734-6, page 223.

[7] K. Symeonidis, D. Apelian, M.M. Makhlouf, Controlled Diffusion Solidification: Application to Metal Casting, Metallurgical Science and Technology 26 (2008) no. 1, 30-36.

[8] M. Sadayappan, M. Sahoo, D. Weiss, Evaluation of Hot Tearing Susceptibility of Selected Magnesium Casting Alloys in Permanent Molds, Transactions of the American Foundry Society 111th Metalcasting Congress, 2007, paper number 07-154.