Comparative Bioleaching and Mineralogical Characterization of Black Shale-Hosted Ores and Corresponding Flotation Concentrates

Abstract:

In this study, two black shale copper ores from different Mid-European Kupferschiefer-type deposits and their flotation concentrates were used for bioleaching tests. All samples were subjected to stirred tank bioleaching using an acidophilic, moderately thermophilic microbial consortium. The distribution of sulfides and gangue minerals in the ores, copper concentrates and residues of both, bioleaching and sterile chemical control tests were investigated using EDX-based particle analysis. The black shale ores and the extracted copper concentrates varied in their mineralogical composition with respect to the distribution of sulfides and gangue. While the copper-bearing sulfides in the Sangerhausen black shale and concentrate were dominated by bornite and chalcopyrite, the Rudna black shale and its flotation concentrate were rich in chalcocite and bornite. Differences in the portion of gangue minerals were detected in particular for carbonates that represented the dominant mineral group in the Rudna black shale and its copper concentrate. Distinct Cu dissolution kinetics and recovery rates of Co and other associated metals were observed for the various materials processed by bioleaching. Copper sulfides were completely dissolved also in both black shale ores. However, the sulfide distribution in the bioleaching residues of the Sangerhausen concentrate revealed that a significant portion of chalcopyrite was not leached. Even higher recovery rates for copper and other metals were determined for the bioleaching tests on the Rudna concentrate, in which copper sulfides were nearly completely dissolved. Alteration of copper sulfides and the formation of calcium sulfate were in particular observed in the sterile control residue of the Rudna concentrate, due to excessively use of sulfuric acid for pH stabilization. Lead sulfate precipitates increasingly occurred in the bioleaching residues, but represented also a common secondary phase in the sterile leaching residues.

• Periodical: Solid State Phenomena (Volume 262)
• Pages: 139-142
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.262.139
• Online since: August 2017
• Authors: Andreas Kamradt*, Juliane Schaefer, Axel Schippers, Sabrina Hedrich
• Keywords: Bioleaching, Black Shale, Chalcopyrite, Flotation Pre-Treatment

References

[1] A. Kamradt, G. Borg, J. Schaefer, S. Kruse, M. Fiedler, P. Romm, A. Schippers, R. Gorny, M. du Bois, C. Bieligk, N. Liebetrau, S. Nell, B. Friedrich, H. Morgenroth, H. Wotruba, C. Merkel, An Integrated Process for Innovative Extraction of Metals from Kupferschiefer Mine Dumps, Germany, Chemie Ingenieur Technik 84 (2012).

DOI: 10.1002/cite.201200070

[2] P. d´Hugues, A. Grotowski, A. Luszczkiewicz, Z. Sadowski, T. Farbiszewska, A. Sklodowska, K. Loukola-Ruskeeniemi, J. Langwaldt, J. Palma, P. Norris, F. Glombitza, S. Groudev, J. Pasava, D.B. Johnson, The Bioshale project: search for a sustainable way of exploiting black shale ores using biotechnology, Adv. Mater. Res. 71-73 (2007).

DOI: 10.4028/www.scientific.net/amr.20-21.42

[3] P. Spolaore, C. Joulian, J. Gouin, D. Morin, P. d'Hugues, Relationship between bioleaching performance, bacterial community structure and mineralogy in the bioleaching of a copper concentrate in stirred-tank reactors, Appl. Microbiol. Biotechnol. 89 (2011).

DOI: 10.1007/s00253-010-2888-5

[4] Q. Liu, Y. Zahn, J. S. Laskowski, The adsorption of polysaccharides onto mineral surfaces: an acid/base interaction, Int. J. Min. Process. 60 (2000) 229-245.

DOI: 10.1016/s0301-7516(00)00018-1

[5] K. Wakeman, H. Auvinen, D.B. Johnson, Microbiological and geochemical dynamics in simulated-heap leaching of a polymetallic sulfide ore, Biotechnol. Bioeng. 101 (2008) 739–750.

DOI: 10.1002/bit.21951

[6] S. Hedrich, A. -G. Guézennec, M. Charron, A. Schippers, C. Joulian, Quantitative monitoring of microbial species during bioleaching of copper concentrate, Front. Microbiol. 7 (2016) (2044).

DOI: 10.3389/fmicb.2016.02044