Preparation and Properties of Environmental-Friendly Ceramsite and Concrete

Abstract:

Ceramsite was prepared from sludge, oil sludge and building residue, and the ratio of ceramsite and sintering process was determined by orthogonal test. The effects of different ratios and sintering process on the compressive strength and bulk density of ceramsite were studied. The strength and thermal conductivity of ceramsite foam concrete were tested by using prepared ceramsite as light aggregate to determine the optimal ratio scheme of ceramsite foam concrete. By designing the early cracking test of concrete, the cracking inhibition effect of ceramsite in foam concrete was explored, which provided a theoretical basis for the application of foam concrete.

• Periodical: Solid State Phenomena (Volume 330)
• Pages: 107-112
• DOI: https://doi.org/10.4028/p-bb5vuc
• Online since: April 2022
• Authors: Ju Song Zhang*, Xi Luan, Xiao Ning Chen
• Keywords: Cellular Concrete, Flexural Performance, Non-Dismantling Formwork

References

[1] Wang Aiguo, Sun Daosheng, etc. Research progress in preparing sintered ceramsite from industrial solid waste［J］. Materials Guide, 2016(9):110-114.

[2] Zhu Bin, Wang Hailiang, Lu Zaihong. Sintered ceramsite test of dewatered sludge in water supply plant [J]. Water supply and drainage, 2005,31(2):35-36.

[3] Wu Yuxin. Experimental study on preparation of swelling ceramsite from municipal water plant sludge [J]. Journal of Shanghai Second Polytechnic University, 2016,33(2:)99-106.

[4] Lu Jianliang, Sun Jingjing. Experimental study on the mix ratio of ceramsite foam concrete[J]. Concrete and Cement Products, 2012(9): 60-62.

[5] Wang Cuihua. Research on related technology of foam concrete preparation[D]. Nanjing University of Technology, (2006).

[6] Xu Zhongan, Wang Tianbao, Li Changying. Introduction to Orthogonal Experimental Design［J］. Scientific and Technological Information Development and Economy, 2002(7).

[7] Wang Zhenjun, Sha Aimin. Test technology of structure and performance of cement concrete slurry-aggregate interface transition zone. Journal of Nanchang University (Engineering Science Edition). 2007, 29(2): 175-180.

[8] Song Shaoming, Tian Qian. Discussion on the water absorption properties of ceramsite. 2002 National Lightweight Aggregate and Lightweight Aggregate Concrete Production, Application, Technology Seminar, Xi'an, 2002: 6-10.

DOI: 10.1016/b978-081551486-2.50002-x

[9] Zheng Xiuhua. The water absorption and backwater characteristics of ceramsite and its influence on the structure and performance of lightweight aggregate concrete. Doctoral Dissertation of Harbin Institute of Technology. 2005: 25-31.

[10] Wang Zhenjun, Sha Aimin. Test technology of structure and performance of cement concrete slurry-aggregate interface transition zone. Journal of Nanchang University (Engineering Science Edition). 2007, 29(2): 175-180.