Surface Finish Optimization of Vapor Smoothened PLA Fabricated Parts with Microstructural Analysis

Abstract:

Additive Manufacturing (AM) is a product creation method done layer-by-layer. This process tends to create an unwanted feature known as staircase effect. Vapor smoothing is considered a viable solution for polymer-based AM products to minimized surface roughness. Research literature concerning vapor smoothing of polylactic acid (PLA) parts generally limited unlike its ABS counterpart. This research aims to identify optimum level for both chamber temperature and exposure time of the AM product. Two methods were used to compare their outputs with one another. The two methods are surface roughness tester and optical microscopy. The results provided an impressive 50.88 and 62.72% improvement based on the two test methods. Lastly, a contour-plot was generated to provide future users a guideline if they want to conduct research similar study.

• Periodical: Solid State Phenomena (Volume 357)
• Pages: 29-34
• DOI: https://doi.org/10.4028/p-2moHBC
• Online since: June 2024
• Authors: Charles Edward L. Alviar*, Blessie A. Basilia
• Keywords: Additive Manufacturing, Fused Deposition Modelling, Optical Microscopy, Polylactic Acid, Surface Roughness, Vapor Smoothing

References

[1] R. Teharia, S. R. M. and H. Kumar, "Optimization of process variables for additive manufactured PLA based tensile specimen using taguchi design and artificial neural network (ANN) technique," in Materials Today: Proceedings, 2022.

DOI: 10.1016/j.matpr.2021.10.376

[2] M. Hikmat, S. Rostam and Y. M. Ahmed, "Investigation of tensile property-based Taguchi method of PLA parts fabricated by FDM 3D printing technology," Results in Engineering, vol. 11, p.100264, 2021.

DOI: 10.1016/j.rineng.2021.100264

[3] J. Giri, P. Shahane, J. S. R. Chadge and P. Giri, "Optimization of FDM process parameters for dual extruder 3d printer using Artificial Neural network," in Materials Today: Proceedings, 2021.

DOI: 10.1016/j.matpr.2021.01.899

[4] J. Singh, K. K. Goyal and R. Kumar, "Effect of filling percentage and raster style on tensile behavior of FDM produced PLA parts at different build orientation," in Materials Today: Proceedings, 2022.

DOI: 10.1016/j.matpr.2022.03.444

[5] S. Singh, A. Rajeshkannan, S. Feroz and A. Jeevanantham, "Effect of Normalizing on the Tensile Strength, Shrinkage and Surface Roughness of PLA Plastic," in Materials Today: Proceedings, 2020.

DOI: 10.1016/j.matpr.2020.04.431

[6] F. Lavecchia, M. G. Guerra and L. M. Galantucci, "Chemical vapor treatment to improve surface finish of 3D printed polylactic acid (PLA) parts realized by fused filament fabrication," Progress in Additive Manufacturing, vol. 7, no. 1, pp.65-75, 2020.

DOI: 10.1007/s40964-021-00213-2

[7] D. Singh, R. Singh and K. S. Boparai, "Development and surface improvement of FDM pattern based investment casting of biomedical implants: A state of art review," Journal of Manufacturing Processes, vol. 31, pp.80-95, 2018.

DOI: 10.1016/j.jmapro.2017.10.026

[8] R. Jain and N. Gupta, "Design optimization of PLA lattice in 3D printing," Materials Today: Proceedings.

[9] G. S. Sandhu, K. S. Boparai and K. S. Sandhu, "Effect of slicing parameters on surface roughness of fused deposition modeling prints," in Materials Today: Proceedings, 2022.

DOI: 10.1016/j.matpr.2021.09.047

[10] J. Yifan, Y. Wan and Z. Liu, "Surface polish of PLA parts in FDM using dichloromethane vapour," in MATEC Web of Conferences, 2017.

DOI: 10.1051/matecconf/20179505001

[11] A. P. B. M. Valerga, S. R. Fernandez-Vidal and A. J. Gamez, "Impact of Chemical Post-Processing in Fused Deposition Modelling (FDM) on Polylactic Acid (PLA) Surface Quality and Structure," Polymers 11, p.566, 2019.

DOI: 10.3390/polym11030566

[12] S. Panda, R. Chabra, S. Kapil and V. Patel, "Chemical vapour treatment for enhancing the surface finish of PLA object produced by fused deposition method using the Taguchi optimization method," Springer Nature Applied Science, vol. 2, p.916, 2020.

DOI: 10.1007/s42452-020-2740-1

[13] J. X. J. K. K. X. Z. Lan Cao, "Effect of post-process treatments on mechanical properties and surface characteristics of 3D printed short glass fiber reinforced PLA/TPU using the FDM process," CIRP Journal of Manufacturing Science and Technology, vol. Volume 41, pp. Pages 135-143, 2023.

DOI: 10.1016/j.cirpj.2022.12.008

[14] R. Singh, S. Singh, I. P. Singh, F. Fabbrocino and F. Fraternali, "Investigation for surface finish improvement of FDM parts by vapor smoothing process," Composites Part B: Engineering, vol. 111, pp.228-234, 2017.

DOI: 10.1016/j.compositesb.2016.11.062

[15] R. S. K. S. B. Jasgurpreet Singh Chohan, "Parametric optimization of fused deposition modeling and vapour smoothing processes for surface finishing of biomedical implant replicas," Measurement, vol. Volume 94, pp. Pages 602-613, 2016.

DOI: 10.1016/j.measurement.2016.09.001