Search results

Clinical results of implants should be classified by their professional fields as those that result in high beneficence versus those that have shown low beneficence, see figure 1.
These decisions should be made and reinforced by the manufacturers and professional societies rather than leaving decisions entirely up to regulatory agencies.
Statistical data on long-term survivability should be generated by academics and professional societies for all prostheses now in clinical use.
The Raman ‘fingerprint region’, found between 500-2000 cm-1, is the region of the Raman spectrum which correlates to the molecular vibrations of biochemical importance; although the ‘far Raman-region’, between 2500-3800cm-1 also contains some information about lipid and carbohydrate vibrations as well as the Raman water peak [33, 43].
DNA/RNA and nucleic acids, proteins and amino acids, lipids and phospholipids, carbohydrates, and other small molecule metabolites) as well as avoiding any undesirable effects from water.

The main components of the flexible joints: steel shell, the Gina water stop, the Omega water stop, the prestressing connection steel cables and the horizontal and vertical shear key.
The Gina water stop mainly bear the affect of tension and compression on the axis direction, and the Omega water stop mainly coordinate the displacement on the direction of axis, horizontal and vertical during the operation beside the effect of waterproof; a spring structure is formed by the pretesting connection steel cables as well as two water stop to contain the two tubes connect well and at the same time protect the water stop, amortize the deformation; the steel shell combine with the horizontal and vertical shear key forms the main structure of the flexible joints to limit the displacement on horizontal and vertical directions.
In the joints treatment of Shanghai external ring tunnel, a embedded fiber reinforcing layer was added to the Omega water stop to improve the toughness and performance of resisting water pressure, at the same time the connector cable was wrapped with a retractable rubber hose to prevent corrosion [2].
The sand jacking method full fills the gap with the mixture of sand and water by enlarging the fluid sandbox under gradient pressure.
Corrosion Resistant Design of OMEGA water stop, Cable and Slurry resistor. the 11th Symposium of the  Professional Committee of the Chinese Civil Engineering Society  Tunnel and Underground Engineering waterproofing and drainage Society, 2003: 34–38

Application of nanometer materials in sports in Engineering The application of nanometer materials in the stadium Sports stadiums are professional place for sports training, sports and physical exercise, sports activities relying on the material.
Brush coating and water contact angle of 160 °greater than 106% can be resistant to 10m/S long time scouring.
The silicon wire can form a layer of air between them in a layer of permanent, ensure that the water never and polyester fiber contact.
The nanometer material even when immersed in water for the months, still keep dry, can be called the most waterproof cloth so far.
And the cloth can reduce up to 20% of the resistance in the water moves, provides a new perspective for the development of new sports suit.

The fluid loss of fresh water cement slurry can be controlled about 30mL with 1.2% P1301.
An ecologically friendly water-based drilling fluid was developed by using AMPS, AA, AM and NVP monomer.
Water-based drilling fluids with high temperature fluid loss control additive[P].US:5789349, 1998-8- 4
Oil Field Chemicals.Gulf Professional Publishing: Burlington, MA, 2003
Solution and drilling fluid properties of water soluble AM–AA–SSS copolymers by inverse microemulsion[J].

Both water cooling cutting and dry cutting were used in the sawing experiment.
Its water-cement ratio is 0.33 by weight.
Consequently, the cutting forces decrease under water cooling condition.
diameter: φ350mm v =800mm/min f v c=18.3m/s Ftave dry cutting Ftave cooling water Fnave dry cutting Fnave water cooling a (mm)p Cutting force (N) Material: asphalt concrete Blade diameter: � 350mm vf=800mm/min vc=18.3m/s � � � Ftave dry cutting � Ʒ � Ftave water cooling � � � Fnave dry cutting ŭƹŭFnave water cooling 186 Machining of Natural Stone Materials Conclusions 1.
O'Brien: The Professional Advantage.

View from the village’s infrastructure development, there still exist some problems such as poor infrastructure conditions, no guarantee of water and electricity, the level of the roads relatively low, hardening rate of tractor roads very small, lack of irrigation and conservancy development.
Joint development between industry and agriculture by the industrial sector push forward agriculture sector, the modern transformation of agriculture, promotion agricultural production and facilities of the scale, take the road of intensive development; the promotion of agricultural planting and management of modern science and technology, improve the efficiency of agricultural production, to go eco-cycle development; promote regional market integration and agricultural products into the market, vigorously promote the industry chain of the scale of agriculture, ecological agriculture, to improve the market ability to adapt, refine and reasonable division of labor in agriculture , take the road of professional production.
Under the background of overall plan the urban and rural, regional industry and market integration, technology trading company guide professional farmers planting decentralized production.
Farmers’ organizations promote the formation of professional planting.

Initial volume of water in the aquifer. 4.
Critical water saturation The critical water saturation was set to be 30%.
Water cut greater than 60% 3.
Water injection 2.
Burlington, MA: Elsevier/Gulf Professional, 2006

As the clay settles, the water is removed and recycled.
This clay contained a high percentage of water and had a slurry consistency.
One involved the blocks placed on a sponge and the other involved the blocks placed in a water solution.
One gram of each crushed sample was placed in a clean 1 L Pyrex beaker along with 1 L of deionized water.
According to the Florida Building Code adobe blocks with a compressive strength of at least 300psi can be used to make single story structures or 2 story structures if designed by a professional engineer.

The study was carried out by model experiment in the calm water and oblique wave using 6 types of bilge keel variation in its length and width.
The first experiment is roll decay test in the calm water to get damping moment for every the bilge keels variation such as Table 1.
Conclusions Based on the experiments conducted with fishing vessel model in calm water and oblique wave, the common design of bilge keel is able to reduce roll motion.
Considering uniformity reduction roll motion in the calm water and oblique wave, normal size bilge keel for merchant ship can be applied in the fishing vessel.
Gulf Professional Publishing, 2002.

These traumas can appear on the background of osteoporosis among patients of old and senile age and among children and active professional and amateur sportsmen as well.Trauma of ALC is one of the most frequent injuries in sport in general.
The possibility of return to professional sport after full ruptures of anterior cruciate ligament without surgery is no more than 20% according to Mironov S.P. et al.
The reconstructive surgery of anterior cruciate ligament among professional sportsmen can be executed right away after trauma, i.e. without period of conservative treatment.
The massage (handy, underwater), physical training in water (bath, pool), active electro stimulation are applied on this purpose also. 3rd stage lasts to 16th week.