Search results

As can be seen from the data, the electrical conductivity of samples increased gradually with the increasing temperature from 303 K to 773 K and reached the extreme 2.78 S/cm and 3.25S/cm respectively at 773K.
The economics of inert anodes and wettable cathodes for aluminum reduction cells [J].

Despite efforts to conserve these ecosystems, the data obtained from monitoring programs has shown that a decline in coral cover continues to appear, which makes it clear that the implementation of new technologies is required to mitigate these problems.
The ceramic break went through a size reduction process using a roller mill.

The results are in good agreement with the literature data for this zinc alloys (376 °C and 484 °C) [14].
As previously observed, the higher quality is reached with a Fs of 10-20% where a reduction in pipe extension of about 40% compared to that of the 0% Fs was obtained.

The width of L7 fault is about 30～40m(TSP data shows that the width is about 29～36m).
It is obvious that with the reduction of arch span, the time of adjustment and arch achieving equilibration reduces.

Experiments data were designed using Taguchi’s L18 mixed level orthogonal array and the tests were done in appropriate Universal Testing Machines.
It also indicates that the added SiC particles have effectively enhanced the mechanical properties by their pinning effect with grains of the aluminium alloy in the weld zone and helped maintaining the tensile strength range without much reduction from the maximum load bearing capacity of the material of a minimal range of 21%.

Some data on R for 0.4 < λ < 0.7 µm, chromaticity coordinates and durability were also reported by Branciaroli et al [8].
A 30 µm reduction in the thickness of black chrome coatings implies the higher corrosion of the coatings in 3.5% NaCl.

Since the system is controllable with a CAD-CAM data set it can be implemented in standard machining centers.
A reduction of surface roughness by optimizing the process parameters in combination with an adjusted selection of coating may improve the wear behavior of coated cast iron tools.

Let θr,0=fr=pcosπi=p(-1)i be the initial conditions data that oscillates with the same frequency as the grids ∆r [15].
Westbrook, Mechanism reduction and generation using analysis of major fuel consumption pathways for n-heptane in premixed and diffusion flame, Proc.

Besides, multiplicand A is supplemented with two sign bits to extend to 34 bits complement data.
Circuit schematic of G3:0 is shown in Fig.12, the network of PDN or PUN only needs 7 MOS transistors, which leads to area reduction and property improvement.

Wood et al. have shown the potential of cost reduction primarily in electrode manufacturing [4].
Based on these findings and literature data, the benefits of an overall quality management system in battery production were discussed.