Books by Keyword: Cold Rolling

Books

Edited by: Miguel Ángel Sellés Cantó and Samuel Sánchez-Caballero
Online since: April 2025
Description: We are pleased to present this collection of the selected contributions to the 10th International Conference on Tribology in Manufacturing Processes and Advanced Surface Engineering (ICTMP2024), held from June 26th to 28th, 2024, at the Campus of Alcoy of the Universitat Politècnica de València, Spain. The conference served as an international platform, fostering the exchange of innovative methodologies and practical applications in the field of tribology.
Edited by: Prof. Mihail Ionescu, Prof. Tara Chandra, Prof. Christof Sommitsch and Prof. Raj Shabadi
Online since: December 2023
Description:

The presented special publication contains articles that reflect the latest research results in the field of materials science that will be helpful to researchers and engineers in the field of mechanical engineering.

Edited by: Assoc. Prof. Dr. Maria Cecilia Poletti, Prof. José Manuel Torralba, Assoc. Prof. Dr. Norzahir Sapawe, Dr. Omar S. Dahham and Dr. Xinyu Hu
Online since: December 2022
Description: This special topic publication is devoted to analysing the latest research results in materials and technologies of their processing used in machinery and electronics, chemical production, environmental protection, waste recycling and construction. This edition will be helpful to many researchers and engineers of modern manufacturing.
Edited by: Dr. Josef Kasl, Prof. Thanh Nam Nguyen, Prof. Qing Hua Qin and Fernando B.N. Ferreira
Online since: June 2022
Description:

The results of research and engineering developments in the field of modern engineering materials and technologies of their processing are presented. Research results in materials degradation and failure, analysed of concrete properties at various cement compositions, studied processes of drying in agricultural products and some innovations in textile production are described. The presented edition will be helpful for many engineers and academics worldwide.

Edited by: Suwarno Suwarno, Vivien Djanali, Fahmi Mubarok and Bambang Pramujati
Online since: October 2020
Description: The present book is a contribution from the 4th The International Conference on Mechanical Engineering 2019 (ICOME 2019), which was held in Yogyakarta, Indonesia on August 28-29, 2019. The book consists of papers devoted to the study of materials properties and materials processing technologies used in modern mechanical engineering.
Edited by: Prof. Hao Gong and Prof. Kazuo Umemura
Online since: May 2020
Description: This issue includes selected papers from the 8th International Conference on Nanostructures, Nanomaterials and Nanoengineering 2019 (ICNNN 2019) and from 2019 International Conference on Materials Technology and Applications (ICMTA 2019), Kyoto, Japan, 11th-14th Oct, 2019 and reflects research results of materials for the biomedical application, polymers and composites, structural materials (alloys, steel and building materials), functional and special materials, carbon nanotube and graphene, nanomaterials, chemical technologies for the various applications.
Edited by: Prof. Mohd Hamdi Bin Abdul Shukor and Prof. Vladimir Khovaylo
Online since: March 2020
Description: This volume contains papers from the 10th International Conference on Material and Manufacturing Technology (ICMMT 2019), which took place in Kuala Lumpur, Malaysia, from 26 to 28 of April, 2019 and presents the results of engineering researches in the area of materials science and technologies of materials processing. We think this papers collection will be useful and interesting for many technical specialists from various fields of modern production.
Edited by: Matthew Barnett
Online since: March 2013
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
Recrystallization and grain growth are mechanisms that alter the microstructure without necessarily altering the phase. They are typically driven by high internal elastic and surface energies though sometimes other volumetric energy terms appear. The topic is important to materials engineers and scientists and geologists alike. The former typically aim to exert control over the phenomena for technological and economic benefit while the latter often seek in these mechanisms the answers to questions regarding events long gone. This collection of peer-reviewed papers brings together the most up-to-date knowledge in this field.
Edited by: Li Wang, Jian Guo Lin, Prof. Zheng Yi Jiang, Yong Zang, Quan Yang, Qing Dong Zhang and Cun Long Zhou
Online since: October 2012
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
This work describes the latest advances in, and applications of, advanced rolling equipment and technology. The peer-reviewed articles cover a broad range of topics: advanced rolling processes, equipment and technologies of strip and plate; special rolling equipment and technologies; advanced shearing and straightening equipment and technologies; advanced testing instruments for rolling, shearing, leveling processes and rolled-metal quality; advanced automatic control technologies for rolling, shearing and leveling processes; mathematical modeling and numerical simulation of rolling, shearing and leveling processes; assembly and maintenance of rolling equipment. This book will be a useful reference for professionals working in the field of rolling equipment technology.
Edited by: Asim Tewari, Satyam Suwas, Dinesh Srivastava, Indradev Samajdar and Arunansu Haldar
Online since: December 2011
Description: The development of specific textures in materials occurs either naturally or by synthesis and processing using various methods. The presence of textures in materials manifests itself in the form of anisotropic properties; the understanding of which is indispensable to precise engineering design. In addition to conventional applications in structural materials, texture control has come to be practised in the form of functional materials. This collection is an edited version of papers presented at the sixteenth international conference on the textures of materials (ICOTOM 16), held at the Indian Institute of Technology in Mumbai, India on December 12-17th, 2011.
The proceedings are broadly divided into six sections; the first being a collection of keynote lectures, followed by papers classified under Deformation, Deformation and Annealing, Techniques, Annealing and Materials.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Showing 1 to 10 of 14 Books