Engineering Research
Advanced Engineering Forum
Applied Mechanics and Materials
Engineering Chemistry
Engineering Innovations
Journal of Biomimetics, Biomaterials and Biomedical Engineering
International Journal of Engineering Research in Africa
Materials Science
Advanced Materials Research
Defect and Diffusion Forum
Diffusion Foundations and Materials Applications
Journal of Metastable and Nanocrystalline Materials
Journal of Nano Research
Key Engineering Materials
Materials Science Forum
Nano Hybrids and Composites
Solid State Phenomena
Engineering Series
Advances in Science and Technology
Construction Technologies and Architecture
Engineering Headway
Books by Keyword: Numerical Simulation
Books
Edited by:
Yun-Hae Kim and Prasad Yarlagadda
Online since: September 2013
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), June 13-14, Guangzhou, China.
The 406 papers are grouped as follows:
Chapter 1: Dynamic Systems, Vibration and Noise, Applied Mechanics;
Chapter 2: Design and Modelling in Manufacture, Dynamic Simulation, Machinery and Equipments;
Chapter 3: Fluid, Flow Engineering and Control Technology, Aerodynamics, Wind and Heat Engineering;
Chapter 4: Vehicle Engineering;
Chapter 5: Material Science and Technology;
Chapter 6: Material Processing Technology, Forming, Welding and Joint Technologies, Surface and Coating Engineering;
Chapter 7: Material Design and Experiment Researches Analysis, Testing and Evaluation;
Chapter 8: Advanced Manufacturing Technology and Mechatronics;
Chapter 9: Control Technology and Automation Systems;
Chapter 10: Sensors, Measurement, Detection and Intelligent Information and Data Processing, Fault Diagnosis;
Chapter 11: Communication and Signal Engineering;
Chapter 12: Computer and Information Technologies Applications in Industry and Engineering, Electric and Power Engineering Applications;
Chapter 13: The Internet of Things Technologies;
Chapter 14: Industrial, Management and Education Engineering.
Collection of selected, peer reviewed papers from the 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), June 13-14, Guangzhou, China.
The 406 papers are grouped as follows:
Chapter 1: Dynamic Systems, Vibration and Noise, Applied Mechanics;
Chapter 2: Design and Modelling in Manufacture, Dynamic Simulation, Machinery and Equipments;
Chapter 3: Fluid, Flow Engineering and Control Technology, Aerodynamics, Wind and Heat Engineering;
Chapter 4: Vehicle Engineering;
Chapter 5: Material Science and Technology;
Chapter 6: Material Processing Technology, Forming, Welding and Joint Technologies, Surface and Coating Engineering;
Chapter 7: Material Design and Experiment Researches Analysis, Testing and Evaluation;
Chapter 8: Advanced Manufacturing Technology and Mechatronics;
Chapter 9: Control Technology and Automation Systems;
Chapter 10: Sensors, Measurement, Detection and Intelligent Information and Data Processing, Fault Diagnosis;
Chapter 11: Communication and Signal Engineering;
Chapter 12: Computer and Information Technologies Applications in Industry and Engineering, Electric and Power Engineering Applications;
Chapter 13: The Internet of Things Technologies;
Chapter 14: Industrial, Management and Education Engineering.
Edited by:
Yijin Wu
Online since: September 2013
Description: Collection of selected, peer reviewed papers from the 2013 International Conference on Materials for Renewable Energy & Environment (MREE 2013), May 15-16, 2013, Nanjing, China.
The 176 papers are grouped as follows:
Chapter 1: Engineering Solutions in Traditional Energy;
Chapter 2: Engineering Solutions in Renewable and Alternative Energy;
Chapter 3: Energy Saving;
Chapter 4: Applied Materials Science and Chemical Engineering, Processing Technologies of Materials and Raw Materials;
Chapter 5: Environmental Science and Engineering;
Chapter 6: Engineering Management.
The 176 papers are grouped as follows:
Chapter 1: Engineering Solutions in Traditional Energy;
Chapter 2: Engineering Solutions in Renewable and Alternative Energy;
Chapter 3: Energy Saving;
Chapter 4: Applied Materials Science and Chemical Engineering, Processing Technologies of Materials and Raw Materials;
Chapter 5: Environmental Science and Engineering;
Chapter 6: Engineering Management.
Edited by:
B. Xu and H.Y. Li
Online since: September 2013
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Advanced Materials and its Application (AMA2013), June 22-24, 2013, Wuhan, China.
The 57 papers are grouped as follows:
Chapter 1: Applied Materials Science, Chemical Engineering and Technologies of Material Processing;
Chapter 2: Related Themes.
Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Advanced Materials and its Application (AMA2013), June 22-24, 2013, Wuhan, China.
The 57 papers are grouped as follows:
Chapter 1: Applied Materials Science, Chemical Engineering and Technologies of Material Processing;
Chapter 2: Related Themes.
Edited by:
Wen-Pei Sung, Jimmy Chih-Ming Kao and Ran Chen
Online since: September 2013
Description: Collection of selected, peer reviewed papers from the 2013 3rd International Conference on Frontiers of Manufacturing Science and Measuring Technology (ICFMM 2013), July 30-31, 2013, LiJiang, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 518 papers are grouped as follows:
Chapter 1: Practice of Design Engineering and Researches for Industry;
Chapter 2: Applied Materials Engineering;
Chapter 3: Measuring Technologies, Signal and Data Processing;
Chapter 4: Control, Automation, Communication and Information Technologies;
Chapter 5: Environmental Engineering, Urban Development, Transportation and Logistics;
Chapter 6: Organization of Manufacture and Engineering Management.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 518 papers are grouped as follows:
Chapter 1: Practice of Design Engineering and Researches for Industry;
Chapter 2: Applied Materials Engineering;
Chapter 3: Measuring Technologies, Signal and Data Processing;
Chapter 4: Control, Automation, Communication and Information Technologies;
Chapter 5: Environmental Engineering, Urban Development, Transportation and Logistics;
Chapter 6: Organization of Manufacture and Engineering Management.
Edited by:
Zhang Jun and Honghua Tan
Online since: September 2013
Description: Collection of selected, peer reviewed papers from the 2013 2nd International Symposium on Manufacturing Systems Engineering (ISMSE2013), July 27-29, 2013, Singapore.
The 140 paper are grouped as follows:
Chapter 1: Applied Materials Engineering and Materials Processing;
Chapter 2: Design and Engineering Researches in Mechanical Engineering;
Chapter 3: Environmental Engineering and Energy Sources Engineering;
Chapter 4: Opto- and Microelectronics;
Chapter 5: Measurements, Detection, Signal and Data Processing;
Chapter 6: Mechatronics, Control and Automation of Manufacture;
Chapter 7: Information Technology in Manufacturing Systems;
Chapter 8: Organization of Manufacture and Engineering Management.
The 140 paper are grouped as follows:
Chapter 1: Applied Materials Engineering and Materials Processing;
Chapter 2: Design and Engineering Researches in Mechanical Engineering;
Chapter 3: Environmental Engineering and Energy Sources Engineering;
Chapter 4: Opto- and Microelectronics;
Chapter 5: Measurements, Detection, Signal and Data Processing;
Chapter 6: Mechatronics, Control and Automation of Manufacture;
Chapter 7: Information Technology in Manufacturing Systems;
Chapter 8: Organization of Manufacture and Engineering Management.
Edited by:
Weijun Yang and Jianguo Liang
Online since: September 2013
Description: Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2013), July 27-28, 2013, Zhuhai, China.
The 683 paper are grouped as follows:
Chapter 1: Geological Engineering and Geotechnical Construction;
Chapter 2: Structural Engineering;
Chapter 3: Tunnel, Subway and Underground Facilities;
Chapter 4: Coastal Engineering;
Chapter 5: Bridge Engineering;
Chapter 6: Road and Railway Engineering;
Chapter 7: Seismic Engineering;
Chapter 8: Hydrology and Irrigation;
Chapter 9: Disaster Prevention and Mitigation;
Chapter 10: Traditional Construction Materials;
Chapter 11: Advanced Construction Materials;
Chapter 12: Heating, Gas Supply, Ventilation and Air Conditioning;
Chapter 13: Surveying Engineering and Measurement;
Chapter 14: Cartography and Geographic Information System;
Chapter 15: Construction Technology;
Chapter 16: Computational Mechanics;
Chapter 17: Construction Machinery and Equipment;
Chapter 18: Project Management, Project Construction Cost and Engineering Management.
The 683 paper are grouped as follows:
Chapter 1: Geological Engineering and Geotechnical Construction;
Chapter 2: Structural Engineering;
Chapter 3: Tunnel, Subway and Underground Facilities;
Chapter 4: Coastal Engineering;
Chapter 5: Bridge Engineering;
Chapter 6: Road and Railway Engineering;
Chapter 7: Seismic Engineering;
Chapter 8: Hydrology and Irrigation;
Chapter 9: Disaster Prevention and Mitigation;
Chapter 10: Traditional Construction Materials;
Chapter 11: Advanced Construction Materials;
Chapter 12: Heating, Gas Supply, Ventilation and Air Conditioning;
Chapter 13: Surveying Engineering and Measurement;
Chapter 14: Cartography and Geographic Information System;
Chapter 15: Construction Technology;
Chapter 16: Computational Mechanics;
Chapter 17: Construction Machinery and Equipment;
Chapter 18: Project Management, Project Construction Cost and Engineering Management.
Edited by:
Hirotaka Tanabe
Online since: September 2013
Description: Collection of selected, peer reviewed papers from the 2nd International Conference on Automatic Control and Mechatronic Engineering (ICACME 2013), June 21-22, 2013, Bangkok, Thailand.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 144 papers are grouped as follows:
Chapter 1: Factory Automation and Control Systems, Robotics, Emerging Technologies of Mechatronics;
Chapter 2: Motor Control;
Chapter 3: Theory and Practice of Fuzzy Systems, Fuzzy Control and Neural Networks;
Chapter 4: Image and Video Processing, Algorithms of Optimization;
Chapter 5: Applied Information Technology;
Chapter 6: Research and Design of Mechanisms and Machines;
Chapter 7: Vehicle Engineering;
Chapter 8: Fracture Mechanics, Material Science, Tribology and Manufacturing Process;
Chapter 9: Product Design, Engineering Management and Organization of Production.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 144 papers are grouped as follows:
Chapter 1: Factory Automation and Control Systems, Robotics, Emerging Technologies of Mechatronics;
Chapter 2: Motor Control;
Chapter 3: Theory and Practice of Fuzzy Systems, Fuzzy Control and Neural Networks;
Chapter 4: Image and Video Processing, Algorithms of Optimization;
Chapter 5: Applied Information Technology;
Chapter 6: Research and Design of Mechanisms and Machines;
Chapter 7: Vehicle Engineering;
Chapter 8: Fracture Mechanics, Material Science, Tribology and Manufacturing Process;
Chapter 9: Product Design, Engineering Management and Organization of Production.
Edited by:
Shengli Li, Weijuan Li and Jiguang Li
Online since: September 2013
Description: Collection of selected, peer reviewed papers from the 3rd International Conference on Advanced Design and Manufacturing Engineering (ADME 2013), 13-14 July, 2013, Anshan, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 250 papers are grouped as follows:
Chapter 1: Composites;
Chapter 2: Micro/Nano Materials and Technology;
Chapter 3: Metal alloys and Mineral Prospecting and Exploration;
Chapter 4: Steel and Iron;
Chapter 5: Polymer Materials and Technology;
Chapter 6: Building Materials, Civil and Geoengineering, Construction Technology;
Chapter 7: Biomaterials, Biotechnology and Environmental Friendly Materials Engineering;
Chapter 8: Surface Engineering/Coatings;
Chapter 9: Mechanical Behavior, Tribology and Fracture;
Chapter 10: Structural Strength and Stability;
Chapter 11: Materials Forming;
Chapter 12: Materials Machining and Processing Technologies;
Chapter 13: Welding and Joining, Applications;
Chapter 14: Modeling, Analysis and Simulation of Manufacturing Processes.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 250 papers are grouped as follows:
Chapter 1: Composites;
Chapter 2: Micro/Nano Materials and Technology;
Chapter 3: Metal alloys and Mineral Prospecting and Exploration;
Chapter 4: Steel and Iron;
Chapter 5: Polymer Materials and Technology;
Chapter 6: Building Materials, Civil and Geoengineering, Construction Technology;
Chapter 7: Biomaterials, Biotechnology and Environmental Friendly Materials Engineering;
Chapter 8: Surface Engineering/Coatings;
Chapter 9: Mechanical Behavior, Tribology and Fracture;
Chapter 10: Structural Strength and Stability;
Chapter 11: Materials Forming;
Chapter 12: Materials Machining and Processing Technologies;
Chapter 13: Welding and Joining, Applications;
Chapter 14: Modeling, Analysis and Simulation of Manufacturing Processes.
Edited by:
Hongyang Zhao, Kun Liu and Xiaoguang Yu
Online since: September 2013
Description: Collection of selected, peer reviewed papers from the 3rd International Conference on Advanced Design and Manufacturing Engineering (ADME 2013), 13-14 July, 2013, Anshan, China.
The 547 papers are grouped as follows:
Chapter 1: Advanced Manufacturing Technology;
Chapter 2: Advanced Equipment Manufacture;
Chapter 3: Fluid and Flow Engineering;
Chapter 4: Dynamic Systems and Analysis, Machinery Dynamics and Dynamic Modelling;
Chapter 5: Advanced Computer-Aided Design and Modelling Technologies in Mechanical Engineering and Mechanisms;
Chapter 6: System Analysis and Industrial Engineering;
Chapter 7: Innovative Design Methodology and Product Design;
Chapter 8: Intelligent Optimization Design and Reverse Engineering;
Chapter 9: Mechatronics, Automation and Control, Detection Technologies;
Chapter 10: Industrial Robotics and Machine Vision, Navigation and GPS Technology;
Chapter 11: Sensor Technologies;
Chapter 12: Measurement and Monitoring Technologies;
Chapter 13: Power, Energy, Microelectronic Technology and Embedded System;
Chapter 14: Communication Technology, WEB and Network Engineering;
Chapter 15: Signal and Intelligent Image, Video Information Processing, Data Mining;
Chapter 16: Software Development and Application;
Chapter 17: Computer Applications and Information Technologies in Industry and Engineering;
Chapter 18: Production and Operation Management, Supply Chain, Electronic E-Commerce and Internet of Things Application;
Chapter 19: Management and Education Engineering.
The 547 papers are grouped as follows:
Chapter 1: Advanced Manufacturing Technology;
Chapter 2: Advanced Equipment Manufacture;
Chapter 3: Fluid and Flow Engineering;
Chapter 4: Dynamic Systems and Analysis, Machinery Dynamics and Dynamic Modelling;
Chapter 5: Advanced Computer-Aided Design and Modelling Technologies in Mechanical Engineering and Mechanisms;
Chapter 6: System Analysis and Industrial Engineering;
Chapter 7: Innovative Design Methodology and Product Design;
Chapter 8: Intelligent Optimization Design and Reverse Engineering;
Chapter 9: Mechatronics, Automation and Control, Detection Technologies;
Chapter 10: Industrial Robotics and Machine Vision, Navigation and GPS Technology;
Chapter 11: Sensor Technologies;
Chapter 12: Measurement and Monitoring Technologies;
Chapter 13: Power, Energy, Microelectronic Technology and Embedded System;
Chapter 14: Communication Technology, WEB and Network Engineering;
Chapter 15: Signal and Intelligent Image, Video Information Processing, Data Mining;
Chapter 16: Software Development and Application;
Chapter 17: Computer Applications and Information Technologies in Industry and Engineering;
Chapter 18: Production and Operation Management, Supply Chain, Electronic E-Commerce and Internet of Things Application;
Chapter 19: Management and Education Engineering.
Edited by:
Wensong Hu
Online since: September 2013
Description: Collection of selected, peer reviewed papers from the 2013 International Conference on Mechatronics, Applied Mechanics and Energy Engineering (MAMEE 2013), July 27-29, 2013, Singapore.
The 107 papers are grouped as follows:
Chapter 1: Material Engineering;
Chapter 2: Applied Mechanics, Flow and Thermal Engineering;
Chapter 3: Researches of Manufacturing Technologies and Processing;
Chapter 4: Energy Engineering;
Chapter 5: Engineering Researches in Construction;
Chapter 6: Mechatronics and Automation;
Chapter 7: Information Technologies and Computational Procedures in Engineering Researches and Design;
Chapter 8: Related Topics.
The 107 papers are grouped as follows:
Chapter 1: Material Engineering;
Chapter 2: Applied Mechanics, Flow and Thermal Engineering;
Chapter 3: Researches of Manufacturing Technologies and Processing;
Chapter 4: Energy Engineering;
Chapter 5: Engineering Researches in Construction;
Chapter 6: Mechatronics and Automation;
Chapter 7: Information Technologies and Computational Procedures in Engineering Researches and Design;
Chapter 8: Related Topics.