For Libraries For Publication Open Access Downloads About Us Contact Us
Paper Titles
A Comprehensive Review on Magnetic Abrasive Finishing Process
p.1
Investigation of a New Corrosion Inhibitor Cucurbiturils for Mild Steel in 10% Acidic Medium
p.21
Thermal and Structural Properties of Organically Modified Montmorillonite and its Surface Activated with Hydrochloric Acid
p.39
Estimation of Mixed-Mode Stress Intensity Factors with Presence of the Confinement Parameters T-Stress and A3
p.52
Numerical Comparison of HHO and HHOCNG Fuel Performance Analysis with Pilot Diesel Injection
p.58
Design and Static Magnetic Analysis of Magnetostrictive (Tb0.3Dy0.7Fe1.95) Fuel Injector with Flexible Piston Hydraulic Displacement Amplification
p.66
Evaluation of the Management and Use of Water Resources in the Middle Reaches of the Syr Darya Basin (Chirchik-Akhangaran-Keles Irrigation District)
p.75
Layout Design and Users’ Perception of Different Types of High-Rise Office Buildings in Malaysia
p.80

A Comprehensive Review on Magnetic Abrasive Finishing Process

Article Preview

Abstract:

In the nanotechnology era, the need for products with high quality and surfaces with free-from damage has become an urgent necessity. Many components in the precision industries such as electronics, automobile, medical, and aviation require high surface finish to meet their functional requirements, such as, reducing fluid flow resistance, friction, optical losses and increase fatigue strength. However, the scale of such surface quality cannot be achieved by traditional finishing methods. To overcome these limitations, many advanced finishing processes have been developed such as abrasive flow finishing, magnetorheological fluid finishing, magnetic float polishing, and chemical mechanical polishing and magnetic abrasive finishing. Magnetic abrasive finishing (MAF) is one of advanced finishing processes which offers superior surface finish over conventional finishing processes, because of its self-adaptability to finish of different geometric shapes, its a gentle tool which does not impact workpiece surface, its capability to polish advanced engineering materials and its low cost. This article has been focused on MAF, as well as reviewing of advanced finishing processes. The recent researches and challenges of MAF have been discussed as well.

You might also be interested in these eBooks
Advanced Engineering Forum Vol. 18 View Preview

Info:

Periodical:

Advanced Engineering Forum (Volume 18)

Pages:

1-20

DOI:

https://doi.org/10.4028/www.scientific.net/AEF.18.1

Citation:

Cite this paper

Online since:

September 2016

Authors:

Mohannad Naeem Houshi*

Keywords:

Advanced Finishing Processes, Magnetic Abrasive Finishing Process, Material Removal Rate, Surface Roughness

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2016 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

References

[1] Boggs, T, Caroll, R, Tran-Son-Tay, R, Yamaguchi, H, Al-Mousily, F & DeGroff, C 2014, Blood cell adhesion on a polymeric heart valve leaflet processed using magnetic abrasive finishing, Journal of Medical Devices, vol. 8, no. 1, pp.1-8.

DOI: 10.1115/1.4025853

Google Scholar

[2] El-Hofy, H A-G 2005, advanced machining process, Mc-GrawHill Series.

Google Scholar

[3] El-Hofy, H A-G 2007, Fundamentals of machining processes: conventional and nonconventional processes, CRC/Taylor & Francis, Boca Raton, FL.

DOI: 10.1201/9780429443329

Google Scholar

[4] El-Taweel, TA 2008, Modeling and analysis of hybrid electrochemical turning magnetic abrasive finishing of 6061 Al/Al2O3 composite, International Journal of Advanced Manufacturing Technology, vol. 37, no. 7-8, pp.705-714.

DOI: 10.1007/s00170-007-1019-7

Google Scholar

[5] Graziano, AA, Ganguly, V, Bullard, JW , Yamaguchi, H & Schmitz, T2012, Characteristics of cobalt chromium alloy surfaces finished using magnetic abrasive finishing, Proceedings of the ASME 2012 International Manufacturing Science and Engineering Conference MSEC2012 June 4-8, 2012, Notre Dame, Indiana, USA, pp.1-8.

DOI: 10.1115/msec2012-7367

Google Scholar

[6] Ganguly, V, Schmitz, T, Graziano, AA & Yamaguchi, H 2012, An Analysis of polishing forces in magnetic field assisted finishing, Proceedings of the ASME 2012 International Manufacturing Science and Engineering Conference MSEC2012 June 4-8, Notre Dame, Indiana, USA, pp.1-10.

DOI: 10.1115/msec2012-7256

Google Scholar

[7] Givi, M, Tehrani, AF & Mohammadi, A 2012, Polishing of the aluminum sheets with magnetic abrasive, International Journal of Advanced Manufacturing Technology, vol. 61, no. 9-12, pp.989-998.

DOI: 10.1007/s00170-011-3753-0

Google Scholar

[8] Halila, F, Czarnota, C and Nouari, M 2013, Analytical stochastic modeling and experimental investigation on abrasive wear when turning difficult to cut materials, Wear, vol. 302, pp.1145-1157.

DOI: 10.1016/j.wear.2012.12.055

Google Scholar

[9] Jain, VK, Singh, DK & Raghuram, V 2008, Analysis of performance of pulsating flexible magnetic abrasive brush (P-FMAB), Machining Science and Technology, vol. 12, no. 1, pp.53-76.

DOI: 10.1080/10910340701883538

Google Scholar

[10] Jain, VK 2008, Abrasive-based nano- finishing techniques: an overview, Machining Science and Technology, vol. 12, no. 1, p.257–294.

DOI: 10.1080/10910340802278133

Google Scholar

[11] Jain, VK, Sidpara, A, Sankar, MR & Das, M 2011, Nano-finishing techniques: a review, Journal of Mechanical Engineering Science, vol. 226, pp.327-346.

DOI: 10.1177/0954406211426948

Google Scholar

[12] Jain, VK 2009, Magnetic field assisted abrasive based micro-/nano-finishing, Journal of Materials Processing Technology, vol. 209, no. 20, p.6022–6038.

DOI: 10.1016/j.jmatprotec.2009.08.015

Google Scholar

[13] Jiang, M & Komanduri 1998, On the finishing of Si3Ni4 balls for bearing applications, Wear, vol. 215, no. 1-2, pp.267-278.

DOI: 10.1016/s0043-1648(97)00236-6

Google Scholar

[14] Jain, NK & Jain, VK2001, Modeling of material removal in mechanical type advanced machining processes: a state-of-art review, International Journal of Machine Tools & Manufacture, vol. 41, no. 11, pp.1573-1635.

DOI: 10.1016/s0890-6955(01)00010-4

Google Scholar

[15] Jha, S & Jain, VK2006, Modeling and simulation of surface roughness in magnetorheological abrasive flow finishing (MRAFF) process, Wear, vol. 261, no. 7-8, p.856–866.

DOI: 10.1016/j.wear.2006.01.043

Google Scholar

[16] Jayswal, SC, Jain, VK & Dixit, PM2005, Modeling and simulation of magnetic abrasive finishing process, International Journal of Advanced Manufacturing Technology, vol. 26, no. 5-6, p.477–490.

DOI: 10.1007/s00170-004-2180-x

Google Scholar

[17] Jain, VK, Kumar, V & Sankar, MR2012, Experimental study and empirical modelling of magnetic abrasive finishing on ferromagnetic and non-ferromagnetic materials, Int. J. Precision Technology, vol. 3, no. 1, pp.91-104.

DOI: 10.1504/ijptech.2012.045991

Google Scholar

[18] Jain, VK, Kumar, P, Behera, PK & Jayswal, SC 2001, Effect of working gap and circumferential speed on the performance of magnetic abrasive finishing process, Wear, vol. 250, no. 1-12, pp.384-390.

DOI: 10.1016/s0043-1648(01)00642-1

Google Scholar

[19] Ji, S, Xu, Y, Chen, G & Jin, M 2011, Comparative study of magnetic abrasive finishing in free-form surface based on different polishing head, Materials Science Forum, vol. 675-677, pp.593-596, doi: 10. 4028/www. scientific. net/MSF. 675-677. 593.

DOI: 10.4028/www.scientific.net/msf.675-677.593

Google Scholar

[20] Judal, KB & Yadava, V 2013, 'Electrochemical magnetic abrasive machining of AISI304Stainless Steel tubes, International Journal of Precision Engineering and Manufacturing, vol. 14, no. 1, pp.37-43.

DOI: 10.1007/s12541-013-0006-1

Google Scholar

[21] Juha, S & Jain, VK 2006, Nano-finishing Techniques, in NP, Mahalik(ed. ), Micro manufacturing and Nanotechnology , Gwangju Institute of Science and Technology, Republic of South Korea, pp.171-195.

Google Scholar

[22] Judal, KB & Yadava, Y 2013, 'Experimental investigations into electrochemical magnetic abrasive machining of cylindrical shaped nonmagnetic stainless steel workpiece, Materials and Manufacturing Processes, vol. 28, no. 1o, pp.1095-1101.

DOI: 10.1080/10426914.2013.792427

Google Scholar

[23] Jayswal , SC, Jain , VC & Dixit, PM 2005, Modeling and simulation of magnetic abrasive finishing process, International Journal of Advanced Manufacturing Technology, vol. 26, no. 5-6, pp.477-490.

DOI: 10.1007/s00170-004-2180-x

Google Scholar

[24] J. Luo, D.A. Dornfeld 2001, Material removal mechanism in chemical mechanical polishing: theory and modeling , IEEE Transactions on Semiconductor Manufacturing, vol. 14, p.112–133.

DOI: 10.1109/66.920723

Google Scholar

[25] Jain, VC, Jayswal, SC, & Dixit, PM 2007, Modeling and simulation of surface roughness in magnetic abrasive finishing using non-uniform surface profiles, Materials and Manufacturing Processes, vol. 22, no. 2, pp.256-270.

DOI: 10.1080/10426910601134096

Google Scholar

[26] Judal, KB, Yadava, V & Pathak, D 2013, Experimental Investigation of vibration assisted cylindrical magnetic abrasive finishing of aluminum workpiece, Materials and Manufacturing Processes, vol. 28, no. 11, p.1196–1202.

DOI: 10.1080/10426914.2013.811725

Google Scholar

[27] Jung, JR & Yum, BJ 2011, Artificial neural network based approach for dynamic parameter design, Expert Systems with Applications, vol. 38, pp.504-510.

DOI: 10.1016/j.eswa.2010.06.092

Google Scholar

[28] Jain, NK, Jain, VK & Jha, S, Parametric optimization of advanced fine-finishing processes, Int. J. Adv. Manuf. Technol., vol. 34, pp.1191-1213.

DOI: 10.1007/s00170-006-0682-4

Google Scholar

[29] Kim, TW, Kang, DM & Kwak, JS 2010, Application of magnetic abrasive polishing to composite materials, Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1029-1034.

DOI: 10.1007/s12206-010-0323-6

Google Scholar

[30] Kang, J, George, A & Yamaguchi, H 2012, High-speed internal finishing of capillary tubes by magnetic abrasive finishing, Procedia CIRP, vol. 1, pp.414-418.

DOI: 10.1016/j.procir.2012.04.074

Google Scholar

[31] Kang, J & Yamaguchi, H 2012, Internal finishing of capillary tubes by magnetic abrasive finishing using a multiple pole-tip system, Precision Engineering, vol. 36, no. 3, pp.510-516.

DOI: 10.1016/j.precisioneng.2012.01.006

Google Scholar

[32] Kwak, JS 2009, Enhanced magnetic abrasive polishing of non-ferrous metals utilizing a permanent magnet, International Journal of Machine Tools & Manufacture, vol. 49, no. 7-8, pp.613-618.

DOI: 10.1016/j.ijmachtools.2009.01.013

Google Scholar

[33] Kantihaldar, B 2010, CNC tool path generation for free form surface machining, MSc Thesis, Jadavpur University.

Google Scholar

[34] Liu, ZQ, Chen, Y, Li, Y J & Zhang, X 2013, Comprehensive performance evaluation of the magnetic abrasive particles, International Journal of Advanced Manufacturing Technology, vol. 68, pp.631-640.

DOI: 10.1007/s00170-013-4783-6

Google Scholar

[35] Lin, TC, Yang, LD & Chow, HM 2007, Study of magnetic abrasive finishing in free-form surface operations using the Taguchi method, International Journal of Advanced Manufacturing Technology, vol. 34, no. 1-2, pp.122-130.

DOI: 10.1007/s00170-006-0573-8

Google Scholar

[36] Lu, C, Gong, X, Jia, H & Chai, G 2010, Study on the fluid magnetic abrasive polishing technology, Advanced Materials Research, vol. 102-104, pp.495-501.

DOI: 10.4028/www.scientific.net/amr.102-104.495

Google Scholar

[37] Lin, CT, Y, LD & Chow, HM 2007, Study of magnetic abrasive finishing in free-form surface operations using the Taguchi method, International Journal of Advanced Manufacturing Technology, vol. 34, pp.122-130.

DOI: 10.1007/s00170-006-0573-8

Google Scholar

[38] Manjaiah, M, Narendranth, S & Basavarajappa, S 2014 Review on non-conventional machining of shape memory alloys, Trans. Nonferrous Met. Soc. China, vol. 24, no. 1, pp.12-21.

DOI: 10.1016/s1003-6326(14)63022-3

Google Scholar

[39] Mathia, TG, Pawlus, P & Wieczorowski, M 2011, Recent trends in surface metrology, Wear, vol. 271, no. 3-4, pp.494-508.

DOI: 10.1016/j.wear.2010.06.001

Google Scholar

[40] Mali, HS & Manna, A 2012, Simulation of surface generated during abrasive flow finishing of Al/SiCp-MMC using neural networks, International Journal of Advanced Manufacturing Technology, vol. 61, no. 9-12, pp.1263-1268.

DOI: 10.1007/s00170-012-4091-6

Google Scholar

[41] Mulik, RS & Pandey, PM 2010 a, ' Mechanism of surface finishing in ultrasonic- assisted magnetic abrasive finishing process, Materials and Manufacturing Processes, vol. 25, no. 12, p.1418–1427.

DOI: 10.1080/10426914.2010.499580

Google Scholar

[42] Mori, T, Hirota, K & Kawashima, Y2003, Clarification of magnetic abrasive finishing mechanism, Journal of Materials Processing Technology, vol. 143-144, p.682–686.

DOI: 10.1016/s0924-0136(03)00410-2

Google Scholar

[43] Mulik, RS &. Pandey, PM 2011b, Magnetic abrasive finishing of hardened AISI 52100 steel, International Journal of Advanced Manufacturing Technology, vol. 55, no. 5-8, pp.501-515.

DOI: 10.1007/s00170-010-3102-8

Google Scholar

[44] Mulik, R S & Pandey, PM 2011c, Experimental investigation and optimization of ultrasonic assisted magnetic abrasive finishing process, Journal of Engineering Manufacture, pp.1347-1362, DOI: 10. 1177/09544054JEM2122.

DOI: 10.1177/09544054jem2122

Google Scholar

[45] Moore, ME 2012, Magnetic Abrasive Finishing of Cobalt-Chromium Prosthetic Knees, MSc thesis, University of Florida.

Google Scholar

[46] Oh, JH & Lee, SH 2010, Prediction of surface roughness in magnetic abrasive finishing using acoustic emission and force sensor data fusion, J. Engineering Manufacture, vol. 225, pp.853-864.

DOI: 10.1177/09544054jem2055

Google Scholar

[47] Patil, MG, Chandra K & Misra, PS 2012, Magnetic abrasive finishing – A Review, Advanced Materials Research, vol. 418-420, pp.1577-1581.

DOI: 10.4028/www.scientific.net/amr.418-420.1577

Google Scholar

[48] Preston, FW 1927, The theory and design of plate glass polishing', Journal of the Society of Glass Technology, vol. 11, pp.214-256.

Google Scholar

[49] Singh, AK, Jha, S & Pandey, PM 2011 , Design and development of nanofinishing process for 3D surfaces using ball end MR finishing tool, International Journal of Machine Tools & Manufacture, vol. 51, no. 2, p.142–151.

DOI: 10.1016/j.ijmachtools.2010.10.002

Google Scholar

[50] Singh, DK, Jain, VK & Raghuram, V 2004, Parametric study of magnetic abrasive finishing process, Journal of Materials Processing Technology, vol. 149, no. 1-3, pp.22-29.

DOI: 10.1016/j.jmatprotec.2003.10.030

Google Scholar

[51] Singh, AK, Jha, S & Pandey, PM 2012, 'Magnetorheological ball end finishing process, Materials and Manufacturing Processes, vol. 27, no. 4, p.389–394.

DOI: 10.1080/10426914.2011.551911

Google Scholar

[52] Sidpara, A & Jain, VK2012 a, Theoretical analysis of forces in magnetorheological fluid based finishing process, International Journal of Mechanical Sciences, vol. 56, no. 1, p.50–59.

DOI: 10.1016/j.ijmecsci.2012.01.001

Google Scholar

[53] Sidpara, AM & Jain, VK2012 b, Nanofinishing of freeform surfaces of prosthetic knee joint implant, Journal of Engineering Manufacture, vol. 226, no. 11, pp.1833-1846.

DOI: 10.1177/0954405412460452

Google Scholar

[54] Sathua, CS, Jain, VK, Ramkurmar, J&Sidpara, A2013, Analysis of forces and surface roughness in magnetic abrasive finishing with a ball- end tool, Int. J. Precision Technology, vol. 3, no. 2, pp.131-142.

DOI: 10.1504/ijptech.2013.053301

Google Scholar

[55] Sidpara, A, Das, M & Jain, VK 2009, Rheological characterization of magnetorheological finishing fluid , , Materials and Manufacturing Processes, vol. 24, no. 12, p.1467–1478.

DOI: 10.1080/10426910903367410

Google Scholar

[56] Singh, DK, Jain, VK & Raghuram, V 2006, Experimental investigations into forces acting during a magnetic abrasive finishing process, International Journal of Advanced Manufacturing Technology, vol. 30, no. 7-8, pp.652-662.

DOI: 10.1007/s00170-005-0118-6

Google Scholar

[57] Singh, S & Shan, HS 2002, Development of magneto abrasive flow machining process, International Journal of Machine Tools& Manufacture, vol. 42, no. 8, pp.953-959.

DOI: 10.1016/s0890-6955(02)00021-4

Google Scholar

[58] Terrell, EJ & Higgslll, CF 2007, A Modeling Approach for Predicting the Abrasive Particle Motion During Chemical Mechanical Polishing, Journal of Tribology, vol. no. 4, pp.933-941.

DOI: 10.1115/1.2768614

Google Scholar

[59] Wan, S, Ang, YJ , Sato, T & Lim, GC 2014, Process modeling and CFD simulation of two-way abrasive flow machining, International Journal of Advanced Manufacturing Technology, vol. 71, no. 5-8, p.1077–1086.

DOI: 10.1007/s00170-013-5550-4

Google Scholar

[60] Wang, AC, Tsai, L, Liu, CH, Liang, KZ & Lee, SJ 2011, Elucidating the optimal parameters in magnetic finishing with gel abrasive, Materials and Manufacturing Processes, vol. 26, no. 5, pp.786-791.

DOI: 10.1080/10426914.2010.505620

Google Scholar

[61] Yamaguchi, H, Shinmura, T & Sekine, M 2005, Uniform internal finishing ofSUS304 stainless steel bent tube using a magnetic abrasive finishing process, Journal of Manufacturing Science and Engineering, vol. 127, no. 3, pp.605-611.

DOI: 10.1115/1.1951786

Google Scholar

[62] Yamaguchi, H & Shinmura, T 2004, Internal finishing process for alumina ceramic components by a magnetic field assisted finishing process, Precision Engineering, vol. 28, no. 2, pp.135-142.

DOI: 10.1016/j.precisioneng.2003.07.001

Google Scholar

[63] Yamaguchi, H , Srivastava , AK, Tan, MA, Riveros, RE & Hashimoto, F 2012, 'Magnetic abrasive finishing of cutting tools for machining of titanium alloys, CIRP Annals - Manufacturing Technology, vol. 61, no. 1, pp.311-314.

DOI: 10.1016/j.cirp.2012.03.066

Google Scholar

[64] Yang, LD, Lin, CT & Chow, HM 2009, Optimization in MAF operations using Taguchi parameter design for AISI304 stainless steel, International Journal of Advanced Manufacturing Technology, vol. 42, no. 5-6, pp.595-605.

DOI: 10.1007/s00170-008-1612-4

Google Scholar

© 2025 Trans Tech Publications Ltd. All rights are reserved, including those for text and data mining, AI training, and similar technologies. For open access content, terms of the Creative Commons licensing CC-BY are applied.
Scientific.Net is a registered trademark of Trans Tech Publications Ltd.