Numerical Simulation for the Starting Characteristics of a Wind Turbine

Abstract:

There are many types of wind turbine. Large propeller-type wind turbines are used mainly for large wind farms and offshore wind power generation. Small vertical-axis wind turbines (VAWTs) are often used in distributed energy systems. In previous studies on wind turbines, the basic characteristics such as torque coefficient have often been obtained during rotation, with the turbine rotating at a constant speed. Such studies are necessary for the proper design of wind turbines. However, it is also necessary to conduct research under conditions in which the wind direction and wind speed change over time. Numerical simulation of the starting characteristics is carried out in this study. Based on the flow field around the wind turbine, the force required to rotate the turbine is calculated. The force used to stop the turbine is modeled based on friction in relation to the bearing. Equations for the motion of the turbine are solved by their use as external force. Wind turbine operation from the stationary state to the start of rotation is simulated. Five parameters, namely, blade length, wind turbine radius, overlap, gap, and blade thickness, are changed and the optimum shape is obtained. The simulation results tend to qualitatively agree with the experimental results for steadily rotating wind turbines in terms of two aspects: (1) the optimal shape has an 20% overlap of the turbine radius, and (2) the larger the gap, the lower the efficiency.

• Periodical: Advanced Engineering Forum (Volume 38)
• Pages: 215-221
• DOI: https://doi.org/10.4028/www.scientific.net/AEF.38.215
• Online since: November 2020
• Authors: Anna Kuwana*, Xue Yan Bai, Dan Yao, Haruo Kobayashi
• Keywords: Computational Fluid Dynamics (CFD), Distributed Energy System, Optimization, Savonius Wind Turbine, Unsteady Rotating Wind Turbine, Vertical Axis Wind Turbine (VAWT), Wind Power Generation

References

[1] I. Ushiyama, H. Nagai, J. Shinoda, Experimentally determining the optimum design configuration, Bulletin of JSME. 29(258) (1986) 4130-4138.

DOI: 10.1299/jsme1958.29.4130

[2] U. K. Saha, S. Thotla, D. Maity, Optimum design configuration of Savonius rotor through wind tunnel experiments, Journal of Wind Engineering and Industrial Aerodynamics, 96(8-9) (2008), 1359-1375.

DOI: 10.1016/j.jweia.2008.03.005

[3] T. Hayashi, Y. Li, Y. Hara, Wind tunnel tests on a different phase three-stage Savonius rotor, JSME International Journal Series B Fluids and Thermal Engineering, 48(1) (2005), 9-16.

DOI: 10.1299/jsmeb.48.9

[4] J. V. Akwa, G. A. Silva Jr., A. P. Petry, Discussion on the verification of the overlap ratio influence on performance coefficients of a Savonius wind rotor using computational fluid dynamics, Renewable Energy, 38(1) (2012) 141-149.

DOI: 10.1016/j.renene.2011.07.013

[5] K. Irabu, J. N. Roy, Study of direct force measurement and characteristics on blades of Savonius rotor at static state, Experimental Thermal and Fluid Science, 35(4) (2011) 653-659.

DOI: 10.1016/j.expthermflusci.2010.12.015

[6] S. Roy, U. K. Saha, Wind tunnel experiments of a newly developed two-bladed Savonius-style wind turbine, Applied Energy, 137(1) (2015) 117-125.

DOI: 10.1016/j.apenergy.2014.10.022

[7] K. S. Jeon, J. I. Jeong, J. K. Pan, K. W. Ryu, Effects of end plates with various shapes and sizes on helical Savonius wind turbines, Renewable Energy, 79 (2015) 167-176.

DOI: 10.1016/j.renene.2014.11.035

[8] A. R. El-Bazac, K. Youssef, M. H. Mohamed, Innovative improvement of a drag wind turbine performance, Renewable Energy, 86 (2016) 89-98.

DOI: 10.1016/j.renene.2015.07.102

[9] N. N. Yanenko, The method of fractional steps, Springer-Verlag (1971).

[10] T. Kawamura, K. Kuwahara, Computation of high Reynolds number flow around a circular cylinder with surface roughness, AIAA Paper, 84-0340, (1984).

DOI: 10.2514/6.1984-340