Development of Processing Machine for Convex Curved Rake Face of Pinion Cutter

Abstract:

According to the new profiling characteristic of carbide pinion cutter with convex curved rake face, the verifying experiment for principle of processing method is done on the four axis vertical processing center. According to the experiment result, special machining equipment of convex curved rake face of pinion cutter is designed and developed, position of each axis and motion relationship is ascertained, tool path position of CNC machining is solved, path fitting of grinding wheel machining is done, machining experiment of pinion cutter with convex curved rake face is done by using the developed processing machine, The experiment result shows that the designed machining method and developed machine are proper for machining requirements, changed tendency curve of surface roughness is obtained, the range of cutting parameters is ascertained for getting better surface roughness.

• Periodical: Applied Mechanics and Materials (Volumes 121-126)
• Pages: 1614-1619
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.121-126.1614
• Online since: October 2011
• Authors: Xue Guang Li, Shu Ren Zhang, Guo Quan Shi, Lin Sen Song
• Keywords: Convex Curved Rake Face, Cutting Parameter, Pinion Cutter, Surface Roughness (SR), Vertical Machining Center

References

[1] Wentao Zhang and Guoquan Shi. Research and application of manufacturing model for the special profiling characteristic of carbide pinion cutter with convex curved rake [J]. Mechanical transmission, 2006, 30(1): 15 ~17.

DOI: 10.1109/mace.2010.5535680

[2] Wentao Zhang, Guoquan Shi and Zhanguo Li. Research on designing model for the special profiling characteristic of carbide pinion cutter with convex curved rake [J]. Mechanical transmission, 2005, 29(2): 5~6.

DOI: 10.1109/mace.2010.5535680

[3] Yonggui Lu and Guoquan Shi. Analysis of tooth profile precision for carbide pinion cutter with convex curved rake [J]. tool technology, 2005, 39(8): 53~55.

[4] B. Sencer, Y. Altintas_ and E. Croft. Feed optimization for five-axis CNC machine tools with drive constraints [J]. International Journal of Machine Tools & Manufacture . 2008: 733–745.

DOI: 10.1016/j.ijmachtools.2008.01.002

[5] Lida Zhu and Wanshan Wang. Analysis of dynamic characteristic and structure optimization for parallel machine tool[C] / Proceedings of 2008 International Conference on Modelling, Identification and Control, 2008: 124-127.

[6] Han Peilian, Chen Nanning, Wang Hongwei and Jiang Donghai. Novel technique and principle of No-gap integrated grinding method on a backup roll bearing[C] / Proceedings of the 10th International Conference on Steel Rolling. 2010: 232~239.

[7] Qing LI, Dianpeng LI, Miao HU and Xinhua XIAO. Optimization Design of Spiral Bevel Gear Milling Machine Based on Test FEM Simulation and Sensitivity Analysis[C] / Proceedings of 2010 IEEE the 17th International Conference on Industrial Engineering and Engineering Management. 2010: 444~448.

DOI: 10.1109/icieem.2010.5646578