Development and Application of PCBN Tools Used in High-Speed Milling 30CrMnSiA

Zhi Ding; Hai Dong Yang

doi:10.4028/www.scientific.net/AMM.130-134.3835

Paper Titles

Investigation and Analysis on Operation of Combined Wastewater Treatment Plants in Sunny and Rainy Days
p.3817

A Shot Boundary Detection Method Based on PSO-SVM
p.3821

Image Based Positioning of the Freightcar’s Running Gear Springs
p.3826

Application of Castor Oil-Based Cutting Fluids in Precision Turning
p.3830

Development and Application of PCBN Tools Used in High-Speed Milling 30CrMnSiA
p.3835

A MIL-STD-1553B Bus Command Optimization Algorithm Based on Load Balance
p.3839

A New Approach to Determine Water Influx Rate for Reservoir with Bottom Water
p.3843

Study of Delivery Quantity Model under the Condition of MTO
p.3847

Simultaneously Monitoring of Chromatic Dispersion and Polarization Mode Dispersion for DPSK Signal Based on RF Spectrum Analysis
p.3851

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 130-134Development and Application of PCBN Tools Used in...

Development and Application of PCBN Tools Used in High-Speed Milling 30CrMnSiA

Abstract:

Aiming at the problems of coated carbide cutting tools used in Quenched 30crMnSiA steel milling such as poor cutting performance and shot service life.We have designed and produced a new type of PCBN tools as cutter head by welding. After high-speed milling and testing the Quenched 30CrMnsiA steel, we have optimized the process parameters and improved production efficiency. The experiment proved that the new type of PCBN tools can replace the carbide coated tools completely, It not only increases the tool life, but also reduces the tool costs, and fully demonstrated that the PCBN tools also have good application prospect in high-speed milling.

You might also be interested in these eBooks

Mechanical and Electronics Engineering III

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 130-134)

Pages:

3835-3838

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.130-134.3835

Citation:

Cite this paper

Online since:

October 2011

Authors:

Zhi Ding, Hai Dong Yang

Keywords:

30CrMnSiA, High-Speed Milling, PCBN Tool, Tool Life

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Han Rongdi, Yu Qixun. Cutting with hard machining materials [M]. Beijing: China machine press, 1996: 53.

Google Scholar

[2] Chen Riyao. Theory of metal cutting(2nd edition) [M]. Beijing: China machine press, (2002).

Google Scholar

[3] Du Yuguo, Lin Chunfang, Sun Dan . Development and application of cemented carbide used in 30CrMnSiA high-strength alloy steel processing [J]. China tungsten industry, 2009 24(4).

Google Scholar

[4] Long Zhenhai, Wang Xibin, Liu, Zhibing. Research on wear modes and mechanism of carbide tools in high-Speed milling of difficult-to-cut materials[J]. Tribology, 2005, 25(1).

Google Scholar

[5] Schulz H．High-speed machining[J]．Annals of the CIRP，1992，41(2)：637~642.

Google Scholar