The Synthesis and Characterization of Ba_0.5Sr_0.5TiO₃ Film Fabricated by Micro Arc Oxidation

Abstract:

Ba_0.5Sr0.5TiO₃ film was successfully fabricated by micro arc oxidation of titanium plate in aqueous solution containing Sr(OH)₂ and Ba(OH)₂ for 25 minutes. X-ray diffraction , energy dispersive spectrometer and scanning electron microscopy were used to characterize the crystalline structure, elements composition and surface morphology and HP4284 capacitance prober was used to analyze the dielectric properties of the film. The micro arc oxidation film is mainly composed of tetragonal Ba_0.5Sr0.5TiO3 phases and possesses both high dielectric constant of 454.2 and low dielectric loss of 0.052 at the frequency of 100Hz.The surface morphology appeares smooth and homogeneous except that some holes are uniformly distributed outwardly.

• Periodical: Applied Mechanics and Materials (Volume 151)
• Pages: 266-270
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.151.266
• Online since: January 2012
• Authors: Ming Wang, Hui Yong Guo, Wen Bo Huang, Wen Fang Li
• Keywords: Ba_0.5Sr_0.5TiO₃, Characterization, Dielectric Film, Micro-Arc Oxidation (MAO), Synthesis

References

[1] Fu-Hsing,Chu-Tsun Wu,Chueh-Ya Hung.Barium titanate films synthesized by an anodic oxidation-based electrochemical method [J].Surface and Coatings Technology:2002,153:276-283.

DOI: 10.1016/s0257-8972(01)01674-7

[2] Run Xu,Min grong Shen,Shui bing Ge,et al. Dielectric enhancement of sol-gel derived BaTiO3/SrTiO3multilayered thin films [J].Thin Solid Films:2002,406:113-117.

DOI: 10.1016/s0040-6090(02)00050-0

[3] Yan hua Fan,Shu hui Yu,Rong Sun, et al.Microstructure and electrical properties of Mn-doped barium strontium titanate thin films prepared on copper foils [J].Applied Surface Science:2010,256:6531-6535.

DOI: 10.1016/j.apsusc.2010.04.042

[4] Lina Gao,Ji wei Zhai,Xi Yao. The influence of Co doping on the dielectric,ferroelectric and ferromagnetic properties of Ba0.70Sr0.30TiO3 thin films [J].Applied Surface Science:2009, 255: 4251-4255.

DOI: 10.1016/j.apsusc.2008.11.064

[5] Min Zhao,Wan Qiang Cao. The effects of deposition temperature on structure and dielectric properties of Ba0.6Sr0.4TiO3 thin films produced by pulsed laser deposition [J].Ceramics International；2009,35:2283-2287.

DOI: 10.1016/j.ceramint.2009.01.004

[6] D.Fasquelle,A. Rousseau,M. Guilloux-Viry,et al.Dielectric and structural characterization of KNbO3 ferroelectric thin films epitaxially grown by pulsed laser depositon on Nb doped SrTiO3[J].Thin Solid Films:2010, 518:3432-3438.

DOI: 10.1016/j.tsf.2010.01.005

[7] Ken-ichi Mimura,Takafumi Naka,Tetsuo Shimura,et al. Sythesis and dielectric properties of (Ba,Ca)(Zr,Ti)O3Thin films using metal-organic precursor solutions [J]. Thin Solid Films:2008,516:8408–8413.

DOI: 10.1016/j.tsf.2008.04.068

[8] Tai-Bor Wu,Chii-Ming Wu,Mei-Ling Chen. Dielectric and leakage current characteristics of Ba(Ti1-xZrx)O3 thin films deposited by rfmagnetron sputtering [J].Thin Solid Films:1998,334: 77-81.

DOI: 10.1016/s0040-6090(98)01120-1

[9] Jinbao Xu, Yun Liu, Ray L.Withers. Electric characteristics of BaTiO3/Bi0.5K0.5TiO3 multilayered thin films synthesized via metallooriganic decompositon [J].Solid State Ionics: 2009,180:1118–1120.

DOI: 10.1016/j.ssi.2009.05.014

[10] Fan Suhua,Chen Wen,Zhang Fengqing,et al. Effects of excess Bismuth on Structure and properties of SrBi4Ti4O15 ceramics [J].Bulletin of The Chinese Ceramic Society:2006,25(4):76-79.

[11] KUANG Ya fei,XU Yan,LI Guo xi.Research Advances on the Surface Treatment of Aluminum and Its Alloy [J]. PLATING AND FINISHING: 2000,22（1）:16-21. (in Chinese)

[12] SONG Run-bin,ZUO Hong-bo,JI Ze-sheng.The Development of Plasma Enhance Electro-chemical Surface Ceramic-coa ting on Light Alloy [J]. Light Alloy Fabrication Technology:2003,31（2）;8-11. (in Chinese)

[13] S.V Gnedenkov, P.S Gordienko, O.A Khrisanfova, et al. Formation of BaTiO3 coating on titante by microarc oxidation method [J].Journal of Matierals Science: 2002, 37: 2263-2265.

[14] JIANG Zhao-hua,LI Wen-xu,YAN Jiu-chun,et al. Fabrication of Barium Titanate Thin Films by Microplasma Oxidation [J]. Journal of Materials Engineering:2002,2:34-37. (in Chinese)

[15] Chu-Tsun Wu, Fu-Hsing Lu. Sythesis of barium titanate films by plasma electrolytic oxidation at room electolyte temperature [J]. Surface & Coatings Technology:2005,199:225-230.

DOI: 10.1016/j.surfcoat.2004.10.148

[16] WANG Xinhua, ZHAO Xiaoyun. Prepartion of Barium Titanate Films and Its Structural Characterization and Adhesive Strengtn[J].Piezoelectrics & Acoustooptics, 2011,33(1):143-146.

[17] LI W F,HAN B,DU J,et al.Structural Characteristics of BaTiO3 Films prepared by Microarc Oxidation[J].Transactions of Nonferrous Metals Society of China:2006,16(5):1041-1044.

DOI: 10.1016/s1003-6326(06)60374-9

[18] Huiyong Guo,Wenbo Huang,Wenfang Li,et al.The synthesis and characterization of SrTiO3 film fabricated by micro-arc oxidation[J].Advanced Materials Research,2011,311-313:1262-1266.

[19] Jianming Zeng, Hong Wang, Ming Wang, et al. Preparation and ferroelectric properties of BaTiO3thin films by atmospheric-pressure metalorganic chemical vapor deposition [J]. Thin Solid Films, 1998,322:104-107.

DOI: 10.1016/s0040-6090(97)00965-6