Roll Eccentricity Extraction Method Based on Comprehensive Signal Processing

Abstract:

In modern steel production, strip products account for more than half of the total output. Roll eccentricity is ubiquitous in strip mills, which has a periodic impact on the strip thickness difference. Roll eccentricity compensation is an important part of the automatic gauge control system. Most roll eccentricity compensations extract the roll eccentricity based on the frequency domain analysis of the rolling force. It is difficult to ensure measurement precision of roll eccentricity due to the complexity of interference of the rolling force, therefore the compensation accuracy is difficult to ensure. The roll eccentricity extraction method, based on comprehensive signal processing, was introduced in this paper combined with engineering practice. The roll eccentricity was comprehensively calculated by thickness gauge and other signals that have been delayed; the roll phases were calculated by the roll rotational displacement; and finally, the roll eccentric fluctuation of the upper backup roll and lower backup roll were extracted. The roll eccentricity could be predicted by calculating roll eccentric fluctuations and phases, in order to provide the basis for accurate compensation. According to the comparison with roll eccentricity extracted by the frequency domain analysis of the rolling force, the roll eccentricity obtained by the roll eccentricity extraction method, based on comprehensive signal processing, is more accurate. It provides a reliable basis for roll eccentricity compensation in order to improve the accuracy of the thickness of the strip products.

• Periodical: Applied Mechanics and Materials (Volumes 184-185)
• Pages: 732-737
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.184-185.732
• Online since: June 2012
• Authors: Yang Yang, Yi Qun Wang, Gang Chen
• Keywords: Fourier Analysis, Roll Eccentric Fluctuation, Roll Eccentricity

References

[1] Lian Jiachuang, Liu Hongmin. Gauge and Shape Control of Strips [M]. version.1， Beijing：Weaponry Industry Press, 1996.

[2] Ginzberg. High Precision Strip Rolling Theory and Practice [M]. Jiang Mingdong, Wang Guodong ed. Version 1. Beijing：Metallurgy Industry Press，2000.

[3] Visitvattanakul P, Sricharoenchai P, Fujita F. Simulation of effect of roll eccentricity on rolled material thickness[J] . SEAISI Quarterly, 2003, 32(1):14~20.

[4] Wang Zheying, Ke Wang, Sun Xingwei. Prognosis technology for roll eccentricity based on the difference evolution algorithm[C]// ICCET 2010 - 2010 International Conference on Computer Engineering and Technology, Proceedings. International Conference on Computer Engineering and Technology, Proceedings, 2010:5486:5490.

DOI: 10.1109/iccet.2010.5486153

[5] Wu Junjie. Application for Roll Eccentricity Compensation Control Based on FFT[J], Automation and Instrumentation,2008 (10):9~11.

[6] Aistleitner K, Mattersdorfer L.G., Haas, W, et al. Neural network for identification of roll eccentricity in rolling mills[J]. Processing Technology, 1996,60(1):387~392.

DOI: 10.1016/0924-0136(96)02359-x

[7] Gao Qi-Ming , Zhao Guo-Qing, Wang Hai-Fei. Simulition and analysis of roller eccentricity compensation in Cold Mill[J]. Advanced Materials Research, 2011, 143:148-151.

DOI: 10.4028/www.scientific.net/amr.143-144.148

[8] Niu Manke. ：Roll Eccentricity Effect and Characteristics Information Extraction Research Based on Modern Signals Processing[D], Beijing：Beijing University of Science and Technology Doctoral Dissertation，2010.

[9] Wang Weiren，Wang Zhenglin and Sun Yikang. Multi-resolution Wavelet Controller Application in the Roll Eccentricity Control[J]. Academic Journal of Beijing University of Science and Technology. 2005,27(6):728:731.

[10] Zhou Jian-Xin, Yang Wei-Dong, Li Qing. Roller eccentricity signal identification and self-adaptive control based on second generation wavelet transform[C]// Proceedings of the 2007 International Conference on Wavelet Analysis and Pattern Recognition, Proceedings of the 2007 International Conference on Wavelet Analysis and Pattern Recognition, ICWAPR '07,2008: 1624-1629.

DOI: 10.1109/icwapr.2007.4421712

[11] Li Yong. Research on Roll Eccentricity Control of Strip Rolling Mill[D], Shenyang: Northeastern University Doctor Papers, 2008.

[12] Widmaier T, Salmela T, Kuosmanen P, et al. Reducing thickness variation of hot rolled steel strip by non-circular back-up roll geometry[J], Ironmaking and Steelmaking, 2009,36(2):133-140.

DOI: 10.1179/174328107x203886