A Further Study on Soil Slope Stability Analysis by Finite Element Slip Surface Stress Method

Abstract:

In this paper, it proves that the necessary and sufficient condition for the potential sliding body reaching the ultimate limit equilibrium state is that the summation of shear stresses along the sliding surface equals to that of resistant shear strength. Based on the rigorous theory analyses and derivations, it is clearly shown that the definition of factor of safety (FOS) in the slip surface stress method (SSSM) is irrelevant with the shape of slip surface. Thus, the authors demonstrate that the FOS of noncircular slip surface can also be defined as the ratio of the sum of resistant sliding force along slip surface to that of sliding force. Furthermore, the physical meaning of the FOS in the SSSM, which can be taken as the average evaluation of the strength reduction coefficient that makes the sliding body reach the ultimate limit equilibrium state along the slip surface in nature, is formulated on the basis of strength reserving theory rather than the overloading theory like that in the Limit Equilibrium Method (LEM) and the Shear Strength Reduction Method (SSRM). Finally, the factors of safety (FOS) and the locations of critical failure surfaces obtained by the SSSM, LEM and SSRM are compared for various geotechnical practices. It is found that the SSSM can achieve precise and reasonable stability assessments for the soil slopes on the basis of actual stress field. Consequently, compared with the LEM and SSRM, the SSSM is demonstrated to be effective and efficient alternative approach for routine analysis and design in geotechnical engineering practice with a high level of confidence.

• Periodical: Applied Mechanics and Materials (Volumes 204-208)
• Pages: 492-501
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.204-208.492
• Online since: October 2012
• Authors: Hong Jun Li, Yan Yi Zhang, Zu Wen Yan
• Keywords: Factor of Safety (FOS), Limit Equilibrium Method (LEM), Shear Strength Reduction Method, Slip Surface Stress Method, Slope Stability

References

[1] Duncan J. M. (1996): State of the art: limit equilibrium and finite-element analysis of slopes, Journal of geotechnical engineering, 122(7): 577-596.

DOI: 10.1061/(asce)0733-9410(1996)122:7(577)

[2] Cheng Y. M. (2003): Locations of critical failure surface and some further studies on slope stability analysis, Computers and. Geotechnics., 30(3), 255-267.

DOI: 10.1016/s0266-352x(03)00012-0

[3] Zienkiewicz O. C., Humpheson C. and Lewis R.W. (1975): Associated and non-associated visco-plasticity and plasticity in soil mechanics, Geotechnique, 25 (4): 671-689.

DOI: 10.1680/geot.1975.25.4.671

[4] Naylor D. J. (1981): Finite elements and slope stability. Numer. Meth. In: Geomech., Proceedings of the NATO Advanced Study Institute, Lisbon, Portugal; 229-244.

[5] Donald I. B., Giam, S. K. (1988): Application of the nodal displacement method to slope stability analysis. In: Proceedings of the fifth Australia–New Zealand conference on geomechanics, Sydney, Australia, 456-460.

[6] Matsui T. and San K. C. (1992): Finite element slope stability analysis by shear strength reduction technique. Soils and foundations, 32(1): 59-70.

DOI: 10.3208/sandf1972.32.59

[7] Ugai K. and Leshchinsky D. (1995): Three-dimensional limit equilibrium and finite element analysis: a comparison of results, Soils Found, 35 (4): 1-7.

DOI: 10.3208/sandf.35.4_1

[8] Dawson E. M., Roth W. H. and Drescher A. (1999): Slope stability analysis by strength reduction, Geotechnique, 1999, 49 (6): 835-840.

DOI: 10.1680/geot.1999.49.6.835

[9] Giffiths D. V. and Lane P. A. (1999): Slope stability analysis by finite element. Geotechnique, 49(3): 387-403.

[10] Zhao S. Y., Zheng Y.R., Shi W. M. and Wang J. L. (2002): Analysis on safety factor of slope by strength reduction FEM. Chinese Journal of Geotechnical Engineering, 24(3): 343-346.

[11] Cheng Y. M., Lansivaara T., and Wei W. B. (2007): Two dimensional slope stability analysis by limit equilibrium and strength reduction methods, Computers and Geotechnics, 34(3): 137-150.

DOI: 10.1016/j.compgeo.2006.10.011

[12] Zou J. Z., Williams D. J. and Xiong W. L. (1995): Search for critical slip surface based on finite element method. Canadian Geotechnique, 1995, 32(1): 233-246.

DOI: 10.1139/t95-026

[13] Kim J. Y. and Lee S. R. (1997): An improved search strategy for the critical slip surface using finite element stress fields. Computers and Geotechnics, 22(4): 295-313.

DOI: 10.1016/s0266-352x(97)00027-x

[14] Pham H. T. V. and Fredlund D. G. (2003): The application of dynamic programming to slope stability analysis. Canadian Geotechnical Journal, 40(4): 830-847.

DOI: 10.1139/t03-033

[15] Yamagami T. and Ueta Y. (1988): Search for critical slip lines in finite element stress fields by dynamic programming. Proceedings of the 6th International Conference on Numerical methods in Geomechanics, Innsbruck, 1347-1352.

[16] Shao L. T., Tang H. X., and Han G. C. (2001): Finite element method for slope stability analysis with its applications. Chinese Journal of Computational Mechanics, 18(1): 81-87.

[17] Zhao Jie. (2006) The Research of Some Application Problems in Finite Element Method for Slope Stability Analysis. Thesis, Dalian university of technology. Dalian.

[18] Griffiths D. V. (1982): Computation of bearing capacity factors using finite element. Geotechnique, 32(3): 195-202.