Helical Drills Wear during Drilling of a New ELC Austenitic Stainless Steels

Abstract:

This article presents the results of experiments that concerned on the tool wear and tool wear mechanisms by drilling of a new Extra Low Carbon (ELC) austenitic stainless steel X02Cr16Ni10MoTiN. This article presents conclusions of machinability tests on new austenitic stainless steels X02Cr16Ni10MoTiN. The results of cutting zone evaluation under cutting conditions (cutting speed in interval vc=30-50 m/min, depth of cut ap=4.0 mm and feed f=0.02-0.08 mm per rev.).

• Periodical: Applied Mechanics and Materials (Volumes 217-219)
• Pages: 2202-2205
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.217-219.2202
• Online since: November 2012
• Authors: Jozef Jurko, Anton Panda, Marcel Behún, Andrej Berdis, Ján Gecák, Martin Gecík, Peter Orendáč
• Keywords: Cutting Tool, ELC Stainless Steel X02Cr16Ni10MoTiN, Helical Drill, Tool Wear

References

[1] J.Jurko-A.Panda-M.Gajdoš, Study of changes under the machined surface and accompanying phenomena in the cutting zone during drilling of stainless steels with low carbon content. Metalurgia journal, Vol.50, 2, pp.113-117, ISSN 0543-5846, (2011)

DOI: 10.1109/icacte.2010.5579026

[2] J.Jurko-A.Panda-M.Gajdoš, Accompanying phenomena in the cutting zone machinability during turning of stainless steels. International Journal Machining and Machinability of Materials, INDERSCENCE Publisher, Vol.5, No.4, 2009, 383-400 p. ISSN 1748-5711, (2009)

DOI: 10.1504/ijmmm.2009.026899

[3] A.Panda-J.Jurko-J.Duplák-M.Behún, Comprehensive Identification of Sintered Carbide Durability in Machining Process of Bearings Steel 100CrMn6. Advanced Materials Research. Vol. 340, 30-33 p. ISSN 1022-6680, (2011)

DOI: 10.4028/www.scientific.net/amr.340.30

[4] A.Panda-J.Duplák-J.Jurko, Analytical expression of T-vc dependence in standard ISO 3685 for cutting ceramic. Key Engineering Materials. Vol. 480-481, 317-322 p., ISSN 1013-9826, (2011)

DOI: 10.4028/www.scientific.net/kem.480-481.317

[5] J.Jurko-A.Panda: Study on screw drill wear when drilling a new stainless steel X02Cr18Ni10MoTiN and accompanying phenomena in the cutting zone. Advanced Materials Research, Vol.314-316, 995-998 p., ISSN 1022-6680, (2011)

DOI: 10.4028/www.scientific.net/amr.314-316.995

[6] J.Jurko, Verification of surface finish as an indicator of machinability in turning steel X6Cr16Ni10MoTiN, Advanced Materials Research. Vol.291-294, 2987-2990 p., ISSN 1022-6680, (2011)

DOI: 10.4028/www.scientific.net/amr.291-294.2987

[7] J.Jurko, The use of TiAlN coated carbide tool when finish drilling of stainless steel X4Cr17ni8TiN. Applied Mechanics and Materials, Vol.39, 369-374 p., ISSN 1660-9336, (2010)

DOI: 10.4028/www.scientific.net/amm.39.369

[8] E.Ragan-P.Baron-J.Dobránsky: Sucking machinery of transport for dosing granulations of plastics at injection molding. Advanced Materials Research, Vol.383-390, 2813-2818 p., ISSN 1022-6680, (2012)

DOI: 10.4028/www.scientific.net/amr.383-390.2813