Effect of Laser Irradiation Parameters on Healing Fatigue Damage for Polycrystalline Copper Film

Abstract:

In this paper, the effect of laser parameters on fatigue life was investigated by laser irradiation for the undamaged and pre-damaged copper film specimens with thickness of 25μm. The results showed that the laser parameters have a great impact on the strengthening of original specimens and the healing of specimens with fatigue damage, and total fatigue life of the healed specimen with fatigue damage was longer than that of the strengthened original specimen. According to the obtained fatigue life results under different laser irradiation conditions, the optimal laser parameters were identified. The fracture morphology was observed by SEM. The results showed that, under the optimal laser parameters condition, a dense layer was found on the surface of specimen and the columnar grains were refined, which results in increasing the total fatigue life of the specimen.

• Periodical: Applied Mechanics and Materials (Volumes 217-219)
• Pages: 2270-2276
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.217-219.2270
• Online since: November 2012
• Authors: Chang Gang Nai*, De Guang Shang, Chong Gang Ren, Lu Wang, Xiao Dong Liu, Hong Chen, Tao Chen
• Keywords: Fracture Morphology, Healing Fatigue Damage, Laser Irradiation, Optimum Parameter

References

[1] Guangping Zhang, Zhongguang Wang: Acta Metallurgica Sinica. Vol. 41 No. 1 (2005) pp.1-8(In Chinese).

[2] Min-Cheol Chu, Seong-Jai Cho, Hyun-Min Park, Kyung-Jin Yoon, Hyun Ryu: Materials Letters. 58(2004) pp.1313-1316.

[3] M. W. Keller, S. R. White, N. R. Sottos: Polymer. 49 (2008) pp.3136-3145.

[4] M F-X Wagner， N Nayan and U Ramamurty: J. Phys. D: Appl. Phys. 41(2008) pp.1-4.

[5] E.Altus, E.Konstantino: Materials Science and Engineering. A302 (2001)pp.100-105.

[6] Norio Shinga, Junro Kyono: The International Society for Optical Engineering. V4701 (2002) pp.47-54.

[7] Yongjun Zhang, Jingtao Han, Xiuping Ren, Zhongli Zhao: Journal of University of Science and Technology Beijing. 28（2）(2006)pp.129-132(In Chinese).

[8] Zhongli Zhao, Jingtao Han, Ziwei Liu: Journal of University Science and Technology Beijing. 30(3)(2008)pp.239-243(In Chinese).

[9] K.Ando, Y.Shirai, M.Nakatani, Y.Kobayashi, S.Sato: Journal of the European Ceramic Society. 22(2002) pp.121-128.

[10] Yongdong Xu, Wenxing Zhong, Donglang Chai: Aerospace Material & Technology, 3(2001) pp.37-41(In Chinese).

[11] S.Hautakangas, H.Schut, N.H.van Dijk, P.E.J. Rivera Diaz del Castillo and S.van der Zwaag: Scripta Materialia. 58 (2008) pp.719-722.

DOI: 10.1016/j.scriptamat.2007.11.039

[12] Jingtao Han, Zhongli Zhao, Yongjun Zhang: Heavy Casting and Foring. 4(2006):1-3(In Chinese).

[13] Koji Takahashi, Byung-Soo Kim, Min-Cheol Chu, Shigemi Sato, Kotoji Ando: Journal of the European Ceramic Society. 23 (2003) pp.1971-1978.

[14] W.L.Xu, T.M. Yue, H.C. Man, C.P. Chan: Surface & Coatings Technology. 200 (2006) pp.5077-5086.

[15] Zhijian Wang, Shiyun Dong, Binshi Xu, Wei Xia: Infrared and Laser Engineering, 39 (2) (2010) pp.315-319 (In Chinese).

[16] Momma C, Chichkor BN, Nolte S, Alvensleben FV, Tunnerman A, Welling H, Wellegehausen B: Opt Commun. 129 (1996) pp.134-142.

[17] BK.A. Ngoi, K. Venkatarishnan, E.N.L. Lim, B.Tan: Optics and Laser in Engineering. 35 (2001) P. 361-369.