The Novel Continues Biodiesel Proses Using Ultrasonic Clamp on Tubular Reactor

Article Preview

Abstract:

This research is done to explore the advantage of ultrasonic clamp on tubular reactor as a new technology for the transesterification process of the vegetable oil by using the newly fabricated small biodiesel pilot plant. The following studies will analyze on the performance and the efficiency of the ultrasonic tubular reactor in its flow performance and the influence of the angle towards the flow rate which plays the role in the production. The low flow rate and reaction time will influence the cost of biodiesel process and by using ultrasonic, it helps the chemical reaction process to react faster hence contributing to less time consumption. In the research, the methanol to oil molar ratio will consists of 6:1, 9:1 and 12:1 respectively. Besides that, the percentage of catalyst concentration is 0.75 %, 1% and 1.25%. The fabricated small biodiesel pilot plant will be a part of knowledge on biodiesel process and its production.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

691-694

Citation:

Online since:

April 2013

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2013 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] Wang, Y, Du, S., Liu, P, Xue, F. Tang, Comparison of two different processes to synthesize biodiesel by waste cooking oil. A 252 (2006) 107 – 112.

DOI: 10.1016/j.molcata.2006.02.047

Google Scholar

[2] Demirbas, A, Biodiesel from waste cooking oil via base catalytic and supercritical transesterification. 50 (2008) 923 – 927.

DOI: 10.1016/j.enconman.2008.12.023

Google Scholar

[3] L. C. Meher, D. Vidya Sagar, S. N Waik, Technical Aspects of biodiesel production by transesterification. 10 (2006) 248 – 268.

Google Scholar

[4] A.P. Vyas, J. L. Vema, N. Subrahmanyam, A review on FAME production process vol 89, 1 (2010) 1 -9.

Google Scholar

[5] H. D. Hanh, N. T. Dong, k. Oktisu, N. Nishimura, M. Yasuaki, Effect of molar ratio catalyst concentration and temperature on transesterification of triolein with ethanol under ultrasonic irradiation , 4 (2007) 195 – 199.

DOI: 10.1627/jpi.50.195

Google Scholar

[6] D. Kumar, G. Kumar, C.P. P Singh, Ultrasonic assisted transesterification of Jatropha curcas oil using solid catalyst Na/ SiO2, 5 (2010) 839 – 844.

DOI: 10.1016/j.ultsonch.2010.03.001

Google Scholar

[7] Deng, X. Fang, Z., Liu, y. H, Ultrasonic transesterification of Jatropha curcas oil to biodiesel by a two-step process energy conversion and management, 51 (2010) 2802 – 2807.

DOI: 10.1016/j.enconman.2010.06.017

Google Scholar

[8] Berchmans, H. J, Hirata, Biodiesel production from crude Jatropha curcas seed oil with high content of free fatty acids, 99 (2008) 1716 – 1721.

DOI: 10.1016/j.biortech.2007.03.051

Google Scholar

[9] Meher, L. C, Dharmagadda, V.S. S, Naik, S. N, Optimization of alkali catalysed transesterification of pong amia pinnata oil for production of biodiesel, 97 (2006) 1392 – 1397.

DOI: 10.1016/j.biortech.2005.07.003

Google Scholar

[10] Achmad Praptijanto, Sonochemistry approach a new process of biodiesel production from jatropha curcas oil, (2010).

Google Scholar

[11] Le Tu Thanh, Kenji Okitsu, Yasuhiro Sadanaga, Norimichi Takenaka, Yasuaki Maede, Hiroshi Bandow, A two-step continuous ultrasound assisted production of biodiesel fuel from waste cooking oils: A practical and economical approach to produce high quality biodiesel fuel. 101 (2010).

DOI: 10.1016/j.biortech.2010.02.060

Google Scholar