Study on the Influence of Polypropylene Fiber and SBR Latex on the Static Strength of Rubber Mortar

Article Preview

Abstract:

This paper deals with the investigation of the static strength of rubber mortar with the inclusion of two macromolecules: SBR (butylbenzene) latex and PP (polypropylene) fiber. The rubber mortar were produced with the inclusion of SBR latex and PP fiber. The characteristics were performed by testing the compressive strength, flexural strength and the C/F (it refers to the ratio of compressive to flexural strength). The results proved that compared to conventional mortar and rubber mortar, the C/F (lower C/F means better flexibility) of SBR latex modified rubber mortar decreased and its flexibility significantly enhanced. The rubber mortar with 2.5% P/C (it refers to the ratio of polymer-cement) of SBR latex performed best in flexibility and the flexibility of rubber mortar with 30% rubber particles proportion was better than the 20% counterparts. The C/F of PP fiber and SBR latex modified rubber mortar was minimum with 7.5% P/C (20% rubber particles proportion groups) and 2.5% P/C of SBR latex (30% rubber particles proportion groups).

You might also be interested in these eBooks

Info:

Periodical:

Pages:

297-302

Citation:

Online since:

May 2013

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2013 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] Q.Y. Wang, L.Y. Wang, Y.M. Zhang, Study on the compressive and flexural deformation of elastic rubber concrete, J. Concrete and Cement Products. 2 (2008) 6-10. (In Chinese)

Google Scholar

[2] L.J. Li, Z.Z. Chen, W.F Xie, The experimental study on the basic performance of high- strength rubber modified concrete, J. Concrete. 5 (2007) 60-63. (In Chinese)

Google Scholar

[3] The Test Standards of Highway Engineering Cement and Cement Concrete(JTG E30-2005), S. People of Beijing Communication Press.2005. (In Chinese)

Google Scholar

[4] Arin Yilmaz, Nurhayat Degirmenci, Possibility of using waste tire rubber and fly ash with Portland cement as construction materials, J. Waste Management. 29 (2009) 1541-1546.

DOI: 10.1016/j.wasman.2008.11.002

Google Scholar

[5] Nabil M. Al-Akhras, Mohammed M. Smadi, Properties of tire rubber ash mortar, J. Cement & Concrete Composites. 26 (2004) 821-826.

DOI: 10.1016/j.cemconcomp.2004.01.004

Google Scholar

[6] Q.Xu, P.M. Wang, Study on the physical properties of SBR latex modified cement mortar used for Bridge deck, N. Journal of Building Materials. 2 (2001) 143-147. (In Chinese)

Google Scholar

[7] P.M. Wang, Q. Xu, J. Stark, Study on the mechanical properties of SBR latex modified cement mortar used for Bridge deck, N . Journal of Building Materials. 1 (2001) 1-6. (In Chinese)

Google Scholar

[8] J. Wang, Study on mechanical performance of the Polymer modified cement mortar, J. Shanxi Construction. 5 (2011) 105-107. (In Chinese)

Google Scholar

[9] Y.J Mei, P.M. Wang, Z.Y. Li, Study on the influence of fiber and polymer on early cracking prevention and action of cement mortar, N. Journal of Chongqing Jiaotong University (Natural Science Editions). 3 (2008) 408-412. (In Chinese)

Google Scholar