Simulation of the Self-Adhesive Label Printing Pressure Based on Non-Linear Contact

Abstract:

Based on the finite element non-linear contact theory, the calculation model of the self-adhesive label printing pressure is achieved, then doing the non-linear contact of this model by using ANSYS. By changing the magnitude of interference between the printing cylinder and the printing platform, printing pressure is achieved in different magnitudes of interference. Contrast to the traditional empirical method, this method make up for the lack of calculating the printing pressure. It turns out help correcting mechanism parameters to achieve the optimal design.

• Periodical: Applied Mechanics and Materials (Volumes 365-366)
• Pages: 323-326
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.365-366.323
• Online since: August 2013
• Authors: Jiao Yin
• Keywords: Non-Linear Contact, Printing Pressure, Pure Penalty Method, Self-Adhesive Label

References

[1] Xia Jun, How to grasp the printing pressure[J]. Print Field. 7 (2002) 38-40.

[2] Feng Ruiqian, Principles and Processes of Offset Printing, Graphic Communications Press, Beijing, (2000).

[3] Zhang Haiyan, Press Design, Graphic Communications Press, Beijing, (2006).

[4] Wang Maocheng, Finite Element Method, Tsinghua University Press, Beijing, (2003).

[5] Pu Guangyi, ANSYS Workbench 12 Basic Tutorials and Explanation, China Water Power Press, Beijing, (2010).

[6] Han Qingkai, Essentials of Elasticity and the Finite Element Method, Northeastern University Press, Shenyang, (2009).