Study on Uncooled Hybrid Focal Plane Detector Arrays

Mao Yan Fan; Li Fang Zhang

doi:10.4028/www.scientific.net/AMM.389.211

Paper Titles

Research on Influencing Factors of Cooling Process on Inclining Aluminum Profile Wall
p.188

Preparation of Mesoporous Hydroxylapatite Ceramics Using Polystyrene Microspheres as Template
p.194

Research on the Ballistic Model and Simulation of a Ejection Cylinder
p.199

Employing Ceramic Products to Design an Electrostatic Discharge Protection for High-Speed Signal Lines
p.205

Study on Uncooled Hybrid Focal Plane Detector Arrays
p.211

An Experimental Research on Quality and Strength of Aluminous Joint by Clinch Joining Technique
p.217

The Curved Plate Flaw's Location and Direction Detecting Based on the Transducer Array
p.223

The Application of Soft-Switching Choppers in Maglev Trains
p.231

The Effect of Tin and Heat Treatment in Brass on Microstructure and Mechanical Properties for Solving the Cracking of Nut and Bolt
p.237

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 389Study on Uncooled Hybrid Focal Plane Detector...

Study on Uncooled Hybrid Focal Plane Detector Arrays

Abstract:

A thick film array of high sensitive UFPA detector, with 16×16 units, is described in this paper. A micromachining capacitive pixel structure of infrared detector is provided, with the doped (Ba, Sr) TiO3 (BST) thick film as sensitive material. The key factors that affect the detector performance are described, and the basic physical and electrical parameters of ferroelectric materials that the detector needs are given. In addition, the heat insulation technique and the corresponding parameters are provided. The capacitance increment of pixel for this structure is approximately equal to that of infrared detector with equivalent sensitive area, and then the parasitic capacitance between the pixel and substrate electrode lead is reduced. It is easy to design the integrated circuit because the infrared detector with this structure needs only low precision for the circuit. This design idea for array structure of infrared matches the development trend of structure design of infrared focal plane pixel with large array, which paves the way to develop new UFPA detector.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 389)

Pages:

211-216

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.389.211

Citation:

Cite this paper

Online since:

August 2013

Authors:

Mao Yan Fan, Li Fang Zhang

Keywords:

BST, Focal Plane Arrays, Infrared, Thick Films, Uncoolded

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Scott B Evans, T errence H ayden. Raytheon system company. High MTF hybrid ferroeletric IR FPA [J]. SPIE, 1998, 3379: 36-46.

Google Scholar

[2] Sung Tai-Ping, Yuna-Lung Chin, Wen-Taw, et, al. Nevel CMOS readout techniques for uncooled pyroeletric [J]. SPIE, 1998, 3360: 60-72.

Google Scholar

[3] Minoru N, Kazuhiko, Ryuichi K, et al. A new type of dielectric bolometer mode of detector pixel using ferroelectric thin film capacitors for infrared image sensor[J]. Sensors and Actuators, 1999, 77: 39-44.

DOI: 10.1016/s0924-4247(99)00046-1

Google Scholar

[4] Nichloas S, Anil P, Roger W. Pyroelectric properties of thin film lead scandium tantalite[J]. Ferroelectrics, 1992, 133: 35-40.

DOI: 10.1080/00150199208217974

Google Scholar

[5] Tadashi Shiosaki. Piezo-, pyro-, and ferroelectric thin films, Proceedings of the 6th US-Japan seminar on dielectric and piezoelectric ceramics, USA, 1993: 1-8.

Google Scholar

[6] Jiang Shenglin, Zeng Yike, Liu Shaobo. Electrical properties of BST thin films fabricated by a modified sol-gel process [J], Functional materials, 2006(3), 365-367.

Google Scholar

[7] Zhang Wuxing, Xue Lihong, Zou Xuecheng. Fabrication of BST thick film by tape casting method [J], Piezoelectrics and acoustooptics, Vol. 28, No. 3, 2006, 314-316.

Google Scholar