Experimental Study on Friction and Wear Behaviors of Carbon Rubbing against Copper Material under Electric Current

Article Preview

Abstract:

An experimental study on friction and wear properties of carbon strip rubbing against copper contact wire was carried out on a pin-on-disc frictional tester under electric current. The result indicates that the coefficient of friction slowly increases with increasing of electric current. The value of friction coefficient is low, generally not more than 0.125. The wear volume of pin specimen increases with increasing of electric current. The wear volume of pin specimen is very low, generally not more than 0.075g. Through observing the SEM morphology of worn specimens, it can be found that there are obvious pits of arc ablation and traces of melting metal on worn surface. Worn surfaces of the worn specimens are analyzed by an energy dispersive X-ray spectroscopy. It can be observed that the oxidation wear occurs in the frictional process due to arc erosion and significant temperature rise. Therefore the arc erosion and oxidation wear are a main wear mechanism accompanied by materials transferring in the process of electrical sliding friction.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

797-800

Citation:

Online since:

September 2013

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2013 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] H. Nagasawa, K. Kato, Wear mechanism of copper alloy wire sliding against iron-base strip under electric current, Wear. 216 (1998) 179-183.

DOI: 10.1016/s0043-1648(97)00162-2

Google Scholar

[2] C.R.F. Azevedo, A. Sinatora, Failure analysis of a railway copper contact strip, Engineering Failure Analysis. 11 (2004) 829-841.

DOI: 10.1016/j.engfailanal.2004.03.003

Google Scholar

[3] D.H. He, R. R. Manory, N. Grady, Wear of railway contact wires against current collector materials, Wear. 215 (1998) 146-155.

DOI: 10.1016/s0043-1648(97)00262-7

Google Scholar

[4] N.P. Suh, H.C. Sin, The genesis of friction, Wear. 69 (1981) 91-114.

Google Scholar

[5] T. Ding, G.X. Chen, X. Wang, et al, Friction and wear behavior of pure carbon strip sliding against copper contact wire under AC passage at high speeds, Tribolgoy International. 44 (2011) 437-444.

DOI: 10.1016/j.triboint.2010.11.022

Google Scholar

[6] L. Dong, G.X. Chen, et al, Wear mechanism of aluminum-stainless steel composite conductor rail sliding against collector shoe with electric current, Wear. 263 (2007) 598-603.

DOI: 10.1016/j.wear.2007.01.130

Google Scholar

[7] G.X. Chen, F.X. Li, et al, Friction and wear behavior of stainless steel rubbing against copper-impregnated metallized carbon, Tribology International. 42 (2009) 934-939.

DOI: 10.1016/j.triboint.2008.12.011

Google Scholar

[8] X.C. Ma, G.Q. He, D.H. He, et al, Sliding wear behavior of copper-graphite composite material for use in maglev transportation system, Wear. 265 (2008) 1087-1092.

DOI: 10.1016/j.wear.2008.02.015

Google Scholar