Dynamic Characteristics of a Multi-Functional Bridge Bearing with Built-In Piezocomposite Element

Abstract:

A multi-functional bridge bearing with built-in piezocomposite electricity generating element (PCGE) is being developed by our research team to respond to the growing demand of self-powered sensing devices for the monitoring of bridges by harvesting the energy produced by the traffic-induced vibrations. For the intended application, a multilayered piezoelectric PCGE structure composed of layers of piezoceramic, glass/epoxy, and carbon/epoxy, has been developed to improve the durability, output voltage and power of the piezoceramic. The output voltage of this PCGE can be used for real-time traffic monitoring like in bridge-weigh-in-motion systems and can eventually be exploited to generate the electricity needed for the lighting and functioning of other embedded sensors. This paper presents the results of the dynamic loading tests conducted on a prototype of the proposed multi-functional bridge bearing to enhance its design details and verify the accuracy of the measurement. The results show that the bearing provides reliable measurement for traffic monitoring and enable to conceive details for the improvement of the output voltage of the PCGE. Since bridge bearings, as indispensable devices transferring the loads and movements from the deck to the substructure and foundations of the bridge, are continuously subjected to traffic loads, the proposed bridge bearing appears to be a natural and economic solution that can be applied to existing or newly built bridges without modification of the conventional design while providing additional and valuable functions for the maintenance of the structure.

• Periodical: Applied Mechanics and Materials (Volume 432)
• Pages: 275-280
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.432.275
• Online since: September 2013
• Authors: Dong Ho Ha, Jinkyo F. Choo, Chang Hyung Lee, Won Seo Jang, Nam Seo Goo
• Keywords: Bridge Bearing, Dynamic Loading Test, Load Measurement, Piezocomposite Electricity Generating Element (PCGE), Traffic Loading

References

[1] Koh, H.M., Lee, H.S., Kim, S. and Choo, J.F., Monitoring of bridges in Korea, Encyclopedia of Structural Health Monitoring, doi: 10. 1002/9780470061626. shm163, Wiley, (2009).

DOI: 10.1002/9780470061626.shm163

[2] Cook-Chennault, K.A., Thambi, N. and Sastry, A.M., Topical review: Powering MEMS portable devices – a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems, Smart Mater. Struct. 17: 043001, (2008).

DOI: 10.1088/0964-1726/17/4/043001

[3] Sodano, S.A., Inman, D.J. and Park, G., Comparison of piezoelectric energy harvesting devices for recharging batteries, J. Intelligent Material Systems and Structures 16(1): 799–807, (2005).

DOI: 10.1177/1045389x05056681

[4] Tri Tien, C.M. and Goo, N.S., Use of a piezocomposite generating element in energy harvesting, J. Intelligent Material Systems and Structures 21: 1427–1436, (2010).

DOI: 10.1177/1045389x10381658

[5] Zhao, J., Goo, N.S., Choo, J.F. and Ha, D.H., Design and performance evaluation of a d33-mode piezocomposite electricity generating element, submitted to J. Mechanical Science and Technology, (2012).

DOI: 10.1007/s12206-013-0942-9

[6] Ha, D.H., Choo, J.F., Kim, D. and Goo, N.S., Feasibility of a multi-functional bridge bearing with built-in piezoelectric material, Advances in Information Sciences and Service Sciences, 4(11. 17): 142–150, doi: 10. 4156/AISS. vol4. issue11. 17, (2012).

DOI: 10.4156/aiss.vol4.issue11.17

[7] Jiang, L.Z. and Sun, C.T., Analysis of indentation cracking in piezoceramics, International Journal of Solids and Structures, 38: 1903–1918, (2001).

DOI: 10.1016/s0020-7683(00)00142-6

[8] Choo, J.F., Ha, D.H., Goo, N.S. and Jang, W.S., Preliminary test for a multi-functional bridge bearing with built-in piezoelectric material, Advanced Science Letters, 19(1): 37-41, (2013).

DOI: 10.1166/asl.2013.4714