Recovery of Metal Values from Spent Lithium Primary Battery

Abstract:

This document explains and demonstrates how to prepare your camera-ready manuscript for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. The text area for your manuscript must be 17 cm wide and 25 cm high (6.7 and 9.8 inches, resp.). Do not place any text outside this area. Use good quality, white paper of approximately 21 x 29 cm or 8 x 11 inches (please do not change the document setting from A4 to letter). Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc. There should be 60 pounds of space above the caption and 6 pounds of space below it before the text continues. There should be 6 pounds of space above other information of the author, such as name, address and so on. Corresponding author is optional.

• Periodical: Applied Mechanics and Materials (Volume 432)
• Pages: 86-91
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.432.86
• Online since: September 2013
• Authors: Shun Myung Shin, Dong Won Lee, Chang Yong Kang, Jei Pil Wang
• Keywords: Electrodic Powder, Lithium Primary Battery, Manganese, Thermal Treatment

References

[1] K.K. Yoo, S.M. Shin, D.H. Yang and J.S. Sohn: Minerals Engineering Vol. 23 (2010), p.219.

[2] P. Allegretti, J. Furlong and E. Donati: J. of Biotechnology Vol. 122(1) (2006), p.55.

[3] D. Lisbona and T. Snee: Process Safety and Environmental Protection Vol. 89 (2011), p.434.

[4] Information on http: /www. saftbatteries. com.

[5] Information on http: /www. haffa. com. hk.