Technological Process Design and Simulation

Abstract:

The article deals with the designing and simulation of technological process. Its modelling in virtual 3D environment was realized by means of selected software Sketch Up Pro. Computer aid is one of the tools which enable to visualize workshop environment, the motion of all its objects and so to predict the behaviour of individual technical or technological equipments in the real production process. The collisions and other problems can be eliminated, so consequently the quality and production efficiency of existing manufacturing process can be improved. The article is concerned to the virtual design of gears production. There are described some aspects of this technological process, suggested technical devices and the individual steps needed for successful manufacturing start-up.

• Periodical: Applied Mechanics and Materials (Volume 440)
• Pages: 188-193
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.440.188
• Online since: October 2013
• Authors: Peter Monka*, Sergej Hloch
• Keywords: Computer Aid, Design, Simulation, Technological Process, Virtual Workshop

References

[1] Goban, J. et al.: The numerical and computer aided confrontation of kinematic analysis of mechanism, In: Progressivnye technologii i sistemy masinostrojenija: mezdunarodnyj sbornik naucnych trudov, vypusk 41, Doneck, (2011), pp.15-20.

[2] Panda, A., Jurko, J.: Replacement technology bevelling cage suitable technology, In: Ecology of borderland, Gorzów: IBEN, (2008), pp.197-200.

[3] Valicek, J., Cep, R., Rokosz, K. et al.: New way to take control of a structural grain size in the formation of nanomaterials by extrusion, Material wissenschaft und werkstofftechnik, Vol. 43,   Issue 5,   Special Issue: SI, (2012), pp.405-411.

DOI: 10.1002/mawe.201200973

[4] Kadnar M. et al.: The design and verification of experimental machine for real journal bearing testing, Technical Gazette, Vol. 18, n. 1, (2011), pp.95-98.

[5] Knapcikova, L. et al.: Utilization of computer simulation at the selecting of optimal finishing method, In: ATP Journal, no. 8 (2011), pp.38-40.

[6] Fecova, V. et al.: The Possibility of Controlling of Designed Workplace Using Virtual Reality, 2013. In: Conference IMAP 2013, Presov, FVT TU, (2013), pp.6-10.

[7] Gulas S.: Suggestion of robotic workshop for gear production, FMT TU Kosice with seat in Presov, (2012).

[8] Monkova, K.: The utilization of CAD/CAM systems at the basic integral machine part characteristics defining, In: Masinostrojenie i technosfera 21 veka: sbornik trudov 16. mezdunarodnoj naucno-techniceskoj konferencii, Tom 4, Doneck, (2009).