Large Deformation and Discontinuous Yield Analysis of Rotating Disks by Abaqus Softwares

Abstract:

Rotating discs are used widely as important structural elements in mechanical engineering. In order to obtain an optimal structural design, it is necessary to estimate the angular velocity and the stress distribution of a rotating disc in fully plastic state. So Large deformation and discontinuous yield analysis of rotating disks were analyzed by ABAQUS. Moreover, continuous yield, buckling and bifurcation analysis of rotating disk with discontinuous yield were studied. Then, Minidisk model is analyzed using ABAQUS.

• Periodical: Applied Mechanics and Materials (Volumes 48-49)
• Pages: 656-659
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.48-49.656
• Online since: February 2011
• Authors: Shao Wei Hu
• Keywords: ABAQUS Software, Discontinuous Yield of Material, Large Deformation Analysis, Rotating Disc

References

[1] Viggo Tvergaard, on the burst strength and necking behavior of rotating disk, Int. J. mech. Sci. Vol. 20. pp.109-120. (1978).

[2] Hu shaowei, Moran B. Risk assessment and lifetime prediction for metallic components[J]. Proceeding of the SPIE. 2008. 11.

[3] GuK ven U. Elastic. plastic stresses in a rotating annular disk of variable thickness and variable density. [J]. International Journal of Mechanical Sciences 1992; 34(2): 133}8.

DOI: 10.1016/0020-7403(92)90078-u

[4] Rees DWA. Elastics plastic stresses in rotating discs by von Mises and the Tresca. ZAMM 1999; 79(4).

DOI: 10.1002/(sici)1521-4001(199904)79:4<281::aid-zamm281>3.0.co;2-v

[5] Yu M. Twin shear stress yield criterion[J]. International Journal of Mechanical Sciences 1983; 25(1).

[6] Ma G, Iwasaki S. Plastic limit analysis of circular plates with respect to the united yield criterion. [J]. International Journal of Mechanical Sciences 1998; 40(10).

DOI: 10.1016/s0020-7403(97)00140-9