Post-Treatment of Anaerobically Digested Palm Oil Mill Effluent by Polymeric Flocculant-Assisted Coagulation

Abstract:

Typically, palm oil mill industries use conventional anaerobic ponds for treatment of palm oil mill effluent (POME). But, this method alone cannot produce effluent discharge to an allowable limits set by the authorities. This study aimed to investigate further treatment of anaerobically digested POME (COD = 682±14 mgL^-1, TSS = 29±7 mgL^-1 and turbidity = 106±3 NTU) by coagulation-flocculation process. Alum, an industrial-accepted coagulant and OC 100 and PC 100W as two industrial-based polymeric flocculants were used in coagulation-flocculation process. Results indicate coagulation process in its optimum conditions (pH = 6, alum dosage = 1800 mgL^-1, rapid mixing = 5 min, and slow mixing = 20 min) reduces the COD, TSS and turbidity by 59%, 80% and 86%, respectively. Flocculants OC 100 and PC 100W caused further reduction of TSS (85–88%) and turbidity (97–98%). By application of post treatment, the POME characteristics reached to an acceptable discharge level enforced by Malaysian department of environment (DOE).

• Periodical: Applied Mechanics and Materials (Volume 567)
• Pages: 116-121
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.567.116
• Online since: June 2014
• Authors: Amirhossein Malakahmad, Sim Yeong Chuan, Mahdieh Eisakhani
• Keywords: Alum, Industrial Discharge, Physico-Chemical Treatment

References

[1] Malaysian Palm Oil Council, Malaysian Palm Oil Council Annual Report, (2011).

[2] A. Malakahmad, Y. C. Sim, Application of response surface methodology to optimize coagulation–flocculation treatment of anaerobically digested palm oil mill effluent using alum, Desalin. Water Treat. 51 (2013) 6729-6735.

DOI: 10.1080/19443994.2013.791778

[3] K. Vijayaraghavan, D. Ahmad, M. Ezani Bin Abdul Aziz, Aerobic treatment of palm oil mill effluent, J. Environ. Manage. 82 (2007) 24-31.

DOI: 10.1016/j.jenvman.2005.11.016

[4] Y.J. Chan, M.F. Chong, C.L. Law, Biological treatment of anaerobically digested palm oil mill effluent (POME) using Lab-Scale Sequencing Batch Reactor (SBR), J. Environ, Manage. 91 (2010) 1738-1746.

DOI: 10.1016/j.jenvman.2010.03.021

[5] M.D. Mashitah, H. Masitah, M.Y. Kamaruddin, Palm oil mill effluent: A potential substrate for cellulase production. In: The Proceedings of RSCE and 16th SOMChE, Malaysia, (2002) 209–216.

[6] P.W. Wong, N.M. Sulaiman, M. Nachiappan, B. Varadaraj, Pre-treatment and membrane ultrafiltration using treated palm oil mill effluent (POME), Songklanakarin J. Sci. Technol. 24 (2002) 891–898.

[7] A.L. Ahmad, S. Sumathi, B.H. Hameed, Residual oil and suspended solid removal using natural adsorbents chitosan, bentonite and activated carbon: a comparative study, Chem. Eng. J. 108 (2005) 179–185.

DOI: 10.1016/j.cej.2005.01.016

[8] A. Ariffin, S.A. Shatat, A.R. Nik Norulaini, A.K. Mohd Omar, Synthetic polyelectrolytes of varying charge densities but similar molar mass based on acrylamide and their applications on palm oil mill effluent treatment, Desalination. 173 (2005).

DOI: 10.1016/j.desal.2004.02.107

[9] A.L. Ahmad, S. Ismail, S., Bhatia, Water recycling from palm oil effluent (POME) using membrane technology, Desalination. 157 (2003) 87 – 95.

DOI: 10.1016/s0011-9164(03)00387-4

[10] T.Y. Wu, A.W. Mohammad, J. Md. Jahim, N. Annuar, Palm oil mill effluent (POME) treatment and bioresources recovery using ultrafiltration membrance: Effect of pressure on membrane fouling, Biochem. Eng. J. 35 (2007) 309-317.

DOI: 10.1016/j.bej.2007.01.029

[11] Laws of Malaysia Reprint Act 127 Environmental Quality Act 1974, The Commissioner of law revision, Malaysia under the authority of the revision of laws act 1968 in collaboration with percetakan nasional Malaysia, (2006).

[12] S.M. Phang, K.C. Ong, Algal biomass production in digested palm oil mill effluent, Biol. Waste. 25 (1988) 177–191.

DOI: 10.1016/0269-7483(88)90078-x

[13] O.S. Amuda, A. Alade, Coagulation/flocculation process in treatment of abattoir wastewater, Desalination. 196 (2006) 22-31.

DOI: 10.1016/j.desal.2005.10.039

[14] J.P. Wang, Y.Z. Chen, X.W. Ge, H.Q. Yu, Optimization of coagulant-flocculant process for a paper-recycling wastewater treatment using response surface methodology, Physicochem. Eng. Aspects. 302 (2007) 204-210.

DOI: 10.1016/j.colsurfa.2007.02.023

[15] G. Andreas, M. Thrassyvoulos, M. Dionissios, Treatment of olive mill effluents by coagulation-flocculation-hydrogen peroxide oxidation and effect on phytotoxicity, J. Hazard. Mater. 133 (2006) 135-142.

DOI: 10.1016/j.jhazmat.2005.10.024

[16] L. Castrillón, Y. Fernández-Nava, M. Ulmanu, I. Anger, E. Marañón, Physico-chemical and biological treatment of MSW landfill leachate, Waste Manage. 30 (2010) 228-235.

DOI: 10.1016/j.wasman.2009.09.013

[17] APHA, Standard Methods for the Examination of Water and Wastewater, American Public Health Association, Washington, DC, NW. (1992).

[18] L. Metcalf, H.P. Eddy, Wastewater Engineering Treatment and Reuse, Fourth ed., McGraw Hill, (2003).

[19] H.S. Peavy, D.R. Rowe, G. Tchobanoglous, Environmental Engineering, McGraw-Hill, New York, (1985).

[20] A.L. Ahmad, S. Sumathi, B.H. Hameed, Coagulation of residue oil and suspended solid in palm oil mill effluent by chitosan, alum and PAC, Chem. Eng. J. 118 (2006) 99-105.

DOI: 10.1016/j.cej.2006.02.001

[21] S. Bhatia, Z. Othman, A.L. Ahmad, Coagulation-flocculation process for POME treatment using Moringa oleifera seeds extract: Optimization studies, Chem. Eng. J. 133 (2007) 205-212.

DOI: 10.1016/j.cej.2007.01.034