Assessing UAV Landslide Mapping Using Unmanned Aerial Vehicle (UAV) for Landslide Mapping Activity

Article Preview

Abstract:

The purpose of this research is to improve the landslide mapping using unmanned aerial vehicle (UAV) for the area of slope displacement. It further presents the UAV namely multi-motor that being used to capture images at the research area located in Parit, Perak. The objective of this research paper is to develop a three dimensional of landslide area produced from the UAV images. For the whole process of image processing, thirty six control points are established using global positioning system (GPS) staic mehtod using Agisoft Photoscan. The results show that the digital elevation model (DEM), aspect Model, slope model, and digital orthophoto can be obtained using the procedure and method used in the study. The information is obtained through accurate assessment results and used to create a 3D model which is then used to monitor technique applications. The restitution stereo model is also by three dimensional rotations or transformation in 3D surface. From here, the landslide can be detected by calculation of three difference epoch data achieved from Digital Elevation Model (DEM) generation. Prior to that, this paper focuses on the monitoring of that area based on DEM area and volume generated from 3D surface analysis. To conclude this study shows that UAV can be used for producing digital map.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

669-674

Citation:

Online since:

June 2014

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2014 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] H. Eisenbei, UAV Photogrammetry. (2009).

Google Scholar

[2] Arko Lucieer, Sharon Robinson, and Darren Turner , Sept 2010 . Using an Unmanned Aerial Vehicle (UAV) for Ultra-High Resolution Mapping of Antarctic Moss Beds,. 15th Australian Remote Sensing & Photogrammetry Conference.

DOI: 10.3390/rs6054003

Google Scholar

[3] S. Suganthi,K. Srinivasan (2010): Digital Elevation Model Generation And Its Application In Landslide Studies Using Cartosat-1, International Journal of Geomatics and Geosciences, Volume 1.

Google Scholar

[4] Daaam, I., Conference, B., & Engineering, I. (2010). APPLICATION OF CLOSE-RANGE PHOTOGRAMMETRY IN REVERSE ENGINEERING, (April).

Google Scholar