Synthesis and Characterization of CuO/SnO2 Nanocomposites

Abstract:

CuO/SnO₂ nanocomposites materials were prepared by solution coprecipitation process using CuO nanowires-rods and SnO₂ nanowires mixture as a starting materials. The mixture materials were put in beaker glass with distilled water and magnetic stering at 90 ^oC for 3 h. The mixture materials were filtered and heated at 980 ^oC for 20 h. The prepared products were investigated by FE scanning electron microscope (FESEM), X-rays photoemission spectroscopy (XPS) and X-ray driffraction technique (XRD). The results showed nanocomposites structures which consisting of CuO and SnO₂ phase.

• Periodical: Applied Mechanics and Materials (Volume 575)
• Pages: 175-179
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.575.175
• Online since: June 2014
• Authors: Supakorn Pukird*, Dheerachai Polsongkram, Suttinart Noothongkeaw, Khanidtha Jantasom, Ki Seok An
• Keywords: CuO Nanowires, CuO/SnO₂ Nanocomposites, Nanorods, SnO₂ Nanowires

References

[1] C. Xu, Y. Liu, G. Xu and G. Wang. Mater. Res. Bull. Vol. 37(2002), p.2365.

[2] W. Wang, Z. Liu, Y. Liu, C. Xu, C. Zheng and C. Wang. Appl. Phys. A. Vol. 76(2003), p.417.

[3] L.S. Huang, S.G. Yang, T. Li, B.X. Gu, Y.W. Du,Y.N. Lu and S.Z. Shi. Cryst. Growth. Vol. 260(2004), p.130.

[4] W. Jisen, Y. Jinkai, S. Jinquan and B. Ying. Mater. Design. Vol 25(2004), p.625.

[5] P. Raksa, A. Gardchareon, T. Chairuangsri, P. Mangkorntong, N. Mangkorntong and S. Choopun, Ceram. Inter. 35(2009), p.649.

DOI: 10.1016/j.ceramint.2008.01.028

[6] M.R. Yang, S.Y. Chua and R.C. Chang. Sens. Actuators. B Vol. 122(2007), p.269.

[7] Z. Huang and C. Chai. Mater. Lett. Vol. 61(2007), p.5113.

[8] Q. Wan, E.N. Dattoli, W. Lu. Appl. Phys. Lett. Vol. 90(2007), p.2221071.

[9] J. Huang, A.X. Lu, B. Zhao, Q. Wan. Appl. Phys. Lett. Vol. 91(2007), p.0731021.

[10] Q. Kuang, C.S. Lao, Z.L. Wang, Z.X. Xie, and L.S. Am. Chem. Soc. Vol. 129(2007), p.6070.

[11] L.A. Ma and T.L. Guo. Mater. Lett. Vol. 63(2009), p.295.

[12] A. Chowdhuri, V. Gupta and K. Sreenivas. Rev. Adv. Mater. Sci. Vol. 4 (2003), p.75.

[13] A. Chowdhuri, V. Gupta, K. Sreenivas, R. Kumar, S. Mozumdar and P.K. Patanjali, Appl. Phys Lett Vol. 84(2004), p.1180.

DOI: 10.1063/1.1646760

[14] X. Kong and Y. Li. Sens. Actuators B Vol. 105 (2005), p.449.

[15] X.Y. Xue, L.L. Xing, Y.J. Chen, S.L. Shi, Y.G. Wang and T.H. Wang, Phys. Chem. C Vol. 112(2008), p.12157.

[16] J.H. Jeun and S.H. Hong. Sens. Actuators B Vol. 151(2010), p.1.

[17] K. Jantasom, S. Noothongkaew and S. Pukird. Adv. Mater. Res. Vol. 645 (2013), p.129.

[18] C. Guangliang, Z. Mingzhe and Z. Guangtian. SCIENTIFIC REPORTS Vol. 3(2013), p.1250.