Comparative Study of Motorcycle Helmets Impact Performance

Abstract:

Two sets of new and in-service helmets were impact tested using a drop test machine, in accordance to established helmet test protocols. The first test for full helmets was executed in compliance with standard speed requirements of 5.9 m/s in which three of five new helmets performed poorly. The second set utilized lower impact speed of 4 m/s for individual helmet components test. New helmet liners absorbed 5 times more impact energy than the in-service liners while the new shell was 19.3% better in dispersing impact energy than the in-service shell. The undesirable changes in liner thickness have explicit effect on the liner density which is translated into reduction in energy absorbing potential. In brief, exposure to weathering stresses and use intensities has affected helmet impact performance, regardless of service duration.

• Periodical: Applied Mechanics and Materials (Volume 575)
• Pages: 306-310
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.575.306
• Online since: June 2014
• Authors: Hamzah Azhar*, Aqbal Hafeez Ariffin, Solah Mohd Syazwan, Mohd Hafzi Md Isa, Yahaya Ahmad, Wong Shaw Voon
• Keywords: Impact Performance, Liner, Motorcycle Helmet, Shell

References

[1] K.J. Mertz & H.B. Weiss, Changes in motorcycle-related head injury deaths, hospitalizations, and hospital charges following repeal of Pennsylvania, s mandatory motorcycle helmet law. American Journal of Public Health. 2008. 98(8): 1464-1467.

DOI: 10.2105/ajph.2007.123299

[2] J. V. Ouellet and V. Kasantikul. Motorcycle helmet effect on a per-crash basis in thailand and the united states,. Traffic Injury Prevention 7, no. 1 (2006): 49–54.

DOI: 10.1080/15389580500338652

[3] M.R. Lin, H.F. Hwang and N.W. Kuo, Crash severity, injury patterns, and helmet use in adolescent motorcycle riders,. J Trauma. 2001. 50: 24-30.

DOI: 10.1097/00005373-200101000-00004

[4] W.Y. Yu, , Chih Y. C, Wen T. C, and M.R. Lin, Effectiveness of different types of motorcycle helmets and effects of their improper use on head injuries, Int. J Epidemiology, March, (2011).

DOI: 10.1093/ije/dyr040

[5] C. Peek-Asa, D.L. McArthur & J.F. Kraus. The prevalence of non-standard helmet use and head injuries among motorcycle riders,. Accident Analysis and Prevention. 1999. 31: 29-233.

DOI: 10.1016/s0001-4575(98)00071-2

[6] D. S. Liu, C. Y. Chang, C. M Fan, and S. L Hsu. Influence of environmental factors on energy absorption degradation of polystyrene foam in protective helmets,. Engineering Failure Analysis 10, no. 5 (2003): 581–591.

DOI: 10.1016/s1350-6307(03)00040-2

[7] R. Ramani and C. Ranganathaiah. Degradation of acrylonitrile-butadiene-styrene and polycarbonate by uv irradiation,. Polymer Degradation and Stability 69, no. 3 (2000): 347–354.

DOI: 10.1016/s0141-3910(00)00081-1

[8] A Casale, O Salvatore, G Pizzigoni, Measurement of aging effects of ABS polymers, Polymer Eng & Sci, 1975 15(4) 286–293.

DOI: 10.1002/pen.760150410

[9] Malaysian Standard MS1: 1996. Specification for protective helmets for vehicle users. 2nd Revision, Standards and Industrial Research Institute of Malaysia, SIRIM.

[10] M.B.R. Happee, Helmet optimization: outer and inner shell behavior with respect to various criteria,. international journal for consumer and product safety 2 (September 1995): 149–162.

DOI: 10.1080/09298349508945755

[11] W. Wei-cai, D.M. Fu, and Y.X. Li, Study on impact energy absorbing performance of eps buffer layer of motorcycle helmet,. In 2013 Int. Conf. on Mech. and Auto. Eng (MAEE), 105–109, (2013).

DOI: 10.1109/maee.2013.36

[12] H. Azhar, S.V. Wong, Degradation of helmet protective performance: an overview', In: Proc. of Int. Conf . Crashworthiness, September 22-24, 2010: Washington DC, USA.