On the Synthesis of a Five Bar Linkage for Linear Trajectory Using a CAD Analysis

Cristian Emil Moldovan; Carmen Sticlaru

doi:10.4028/www.scientific.net/AMM.658.95

Paper Titles

Mechanical Characteristics of Electronic Printed Circuit Obtained by the Vapour Phase Soldering Process
p.71

Evaluation of Loss of Mass due to Corrosion Using Vibration-Based Methods
p.77

Simulation of the Tooth Helix Angle Influence on the Vibration of a Single Stage Helical Gearbox
p.83

Some Aspects Regarding the Mathematical Modeling and Dynamic Simulation of a Single Stage Helical Gearbox
p.89

On the Synthesis of a Five Bar Linkage for Linear Trajectory Using a CAD Analysis
p.95

Low Speed Linear Actuator for Accurate Orientation of Concentrated Solar Convertors
p.99

On a New Parallel Tracking System for Accurate Orientation of Concentrated Solar Convertors
p.105

Geometrico-Static Modeling and Simulation of the Contact between Chain and Guide of a Reference Transmission
p.111

Contribution on the Optimization of the Spur Gears Design Process Using Software Application
p.117

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 658On the Synthesis of a Five Bar Linkage for Linear...

On the Synthesis of a Five Bar Linkage for Linear Trajectory Using a CAD Analysis

Abstract:

This paper demonstrates how to use CAD Software (Pro/ENGINEER in our case) to generate a cam profile. This cam will be used in a five bar linkage for which the input elements are synchronized through a cam-follower mechanism. The cam profile is generated so that the five bar mechanism produces a certain curve. The paper presents the synthesis method after which a simulation is executed to verify the results.

You might also be interested in these eBooks

Advanced Concepts in Mechanical Engineering I

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 658)

Pages:

95-98

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.658.95

Citation:

Cite this paper

Online since:

October 2014

Authors:

Cristian Emil Moldovan, Carmen Sticlaru

Keywords:

CAD, Cam-Follower, Linkage, Path, Synthesis

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] D. Tavkhelidze, Z. Mchedlishvili, Geometry of a five link mechanism with two degrees of freedom, Journal of Mathematical Sciences, December 2013, Volume 195, Issue 4, pp.560-568.

DOI: 10.1007/s10958-013-1606-0

Google Scholar

[2] Kuang-Hua Chang, Mechanism Design with Pro/ENGINEER Wildfire 4. 0, Schroff Development Corporation, March 1, (2009).

Google Scholar

[3] D. Perju, Mecanisme de Mecanica Fina, Vol. I, Ed. IPT, Timisoara, 1990 (in Romanian).

Google Scholar

[4] G. Gogu, Chebychev–Grübler–Kutzbach's criterion for mobility calculation of multi-loop mechanisms revisited via theory of linear transformations, European Journal of Mechanics - A/Solids, Elsevier, 2005, pp.427-441.

DOI: 10.1016/j.euromechsol.2004.12.003

Google Scholar

[5] Hartenberg R.S., and Denavit J., Kinematic Synthesis of Linkages, McGraw-Hill Inc., New York, USA, (1964).

Google Scholar