A New Method of Preparation of Photo-Thermal Conversion of Ceramifiable Coatings

Abstract:

Photo-thermal conversion of ceramifiable coatings were prepared by poly(siloxanes), glass and Al, CNTs powders as adhesive and pigment, respectively. The influence of Al concentration, curing temperature, single-doped, double-doped on the property of photo-thermal conversion was systematically investigated. The detailed results of experimental investigation indicate that the thermal emissivity of coatings composite with Al would slightly elevated after curing at 500 °C, after curing at 700 °C, the thermal emissivity of these coatings have litter to do with the Al concentration. The coatings composite with 40% Al and 10% CNTs after curing at 500 °C exhibited superior in photo-thermal conversion property.

• Periodical: Applied Mechanics and Materials (Volumes 713-715)
• Pages: 2572-2575
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.713-715.2572
• Online since: January 2015
• Authors: Xiao Shu Jiang*, Jian Xin Wang, Fang Lei Xu
• Keywords: Ceramic, Coatings, Emissivity, Photo-Thermal, Poly(Siloxane)

References

[1] Lu Y, Fang ZG, Lu ChH, et al. Sol Energy, Vol. 105 (2014), pp.20-26.

[2] Weiss W, Stadler I. Facade integration—a new and promising opportunity for thermal solar collectors, in: Proceedings of Industrial Workshop of the IEA Solar Heating and Cooling Programme, Task 26 in Delft, The Netherlands, (2001).

[3] Harlan JBS, William C, Doreen DE. Sol Energ Mat Sol C, Vol. 93 (2009), pp.1404-1410.

[4] Diletta S, Laura S, Luca M, et al. Sol Energ Mat Sol C, Vol. 109 (2013), pp.8-16.

[5] Gunde M. K, Logar JK, Orel ZC, et al. Thin Solid Film, Vol. 277 (1996), pp.185-191.

[6] Orel ZC, Leskovsek N, Orel B, et al. Sol Energ Mat Sol C, Vol. 40 (1996), pp.197-204.

[7] Buhrman RA, Craighead HG, Composite film selective-absorbers, in: L.E. Murr (Ed. ), Solar Materials Science, Academic Press, New York, 1980, p.277–317.

DOI: 10.1016/b978-0-12-511160-7.50016-8

[8] Kennedy, C.E., Review of mid- to high-temperature solar selective absorber materials, Technical Report NREL/TP-520-31267, National Renewable Energy Laboratory, Golden, CO, (July 2002).

[9] Orel B, Spreizer H, Surca VA, et al. Sol Energ Mat Sol C, Vol 91 (2007), pp.108-119.

[10] Orel B, Spreizer H, Slemenik PL, et al. Sol Energ Mat Sol C, Vol. 91 (2007), pp.93-107.

[11] Hu Ch, Xu GY, Shen XM, et al. Appl Surf Sci, Vol. 256 (2010), pp.3459-3463.

[12] Mastai Y, Polarz S, Antonietti M. Adv. Mater., Vol. 22 (2010), p.197–202.

[13] Xiao XD, Miao L, Xu G, et al. Appl Surf Sci, Vol. 257 (2011), pp.10729-10736.