Intense Pulsed Light Sintering of Copper Nanoink for Conductive Copper Film

Abstract:

Conducting electrodes and films are becoming increasingly important for the printed electronics which can be applied in various fields such as RFID tags, photovoltaics, display and PCB. And copper nanoparticle inks serve as an attractive potential replacement to silver nanoparticle inks because its low cost and good electrical conductivtiy.In this paper, the commercial copper nanoparticle powder with oxide shells were dispersed in the solvent of ethylene glycol. Poly (N-vinylpyrrolidone) (PVP K30) was added to the solvent as capping materials. The prepared copper ink was spin-coated on glass substrate under ambient conduction. Then, the deposited Cu ink was sintered by an intense pulsed light (IPL) system. The sintering effects were investigated with different sintering conditions including pulse energy and pulse duration. The resulting electrical resistivity was 94.1uΩ·cm which is about fifty times as high as that of bulk copper. The high resistivity may be mainly attributed to the porosity of sintered film. Also, crystal phase analysis was performed using x-ray diffraction (XRD) and was found the XRD peaks corresponding to cuprous oxide disappeared after IPL sintering. It was believed that PVP reduced the copper oxide to copper in the process of IPL sintering.

• Periodical: Applied Mechanics and Materials (Volume 748)
• Pages: 187-192
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.748.187
• Online since: April 2015
• Authors: Wei Bing Gu, Zheng Cui*
• Keywords: Copper Nanoparticles, Intense Pulsed Light, Printed Electronics, Sintering

References

[1] Roger J A, A diverse printed future, Nature, 468(2010)177.

[2] Berggren M, Nilsson D and Robinson N D, Organic materials for printed electronics, Nature Mater., 6(2007)3–5.

[3] Hong S, Yeo J, Kim G, Kim D, Lee H, Kwon J, Lee H, Lee P, Ko S. H, Nonvacuum, Maskless Fabrication of a Flexible Metal Grid Transparent Conductor by Low-Temperature Selective Laser Sintering of Nanoparticle Ink, ACS nano, 7(2013)6.

DOI: 10.1021/nn400432z

[4] Perelaer J, de Gans B. J, Schubert U. S, Ink-jet printing and microwave sintering of conductive silver tracks, Adv. Mater. 18(2006) 2101–2104.

DOI: 10.1002/adma.200502422

[5] Kang B, Han S, Kim J, Ko S, Yang M, One-Step Fabrication of Copper Electrode by Laser-Induced Direct Local Reduction and Agglomeration of Copper Oxide Nanoparticle, J. Phys. Chem. C, 115(2011) 23664–23670.

DOI: 10.1021/jp205281a

[6] Deng D. Y, Jin Y. X, Cheng Y. R, Qi T. K, Xiao F, Copper Nanoparticles: Aqueous Phase Synthesis and Conductive Films Fabrication at Low Sintering Temperature, ACS Appl. Mater. Interfaces 5(2013) 3839−3846.

DOI: 10.1021/am400480k

[7] Park B K, Kim D, Jeong S, Moon J and Kim J S, Direct writing of copper conductive patterns by ink-jet printing, Thin Solid Films. 515(2007)7706.

DOI: 10.1016/j.tsf.2006.11.142

[8] Rozenberg G G, Bresler E, Speakman S P, Jeynes C and Steinke J H G, Patterned low temperature copper-rich deposits using inkjet printing, Appl. Phys. Lett. 81(2002)5249.

DOI: 10.1063/1.1481985

[9] Liu Q and OrmeM, High precision solder droplet printing technology and the state-of-the-art, J. Mater. Process. Technol. 115(2001) 271.

[10] Lee Y, Choi J R, Lee K J, Stott N E and Kim D, Large-scale synthesis of copper nanoparticles by chemically controlled reduction for applications of inkjet-printed electronics, Nanotechnology 19 (2008)415604.

DOI: 10.1088/0957-4484/19/41/415604

[11] Zenou M, Ermak O, Saar A, Kotler Z., Laser sintering of copper nanoparticles, J. Phys. D: Appl. Phys. 47 (2014) 025501.

DOI: 10.1088/0022-3727/47/2/025501

[12] Kim K S, Bang J O, Choa Y H, Jung S B, The characteristics of Cu nanopaste sintered by atmospheric-pressure plasma, Microelectronic Engineering, 107(2013)121-124.

DOI: 10.1016/j.mee.2012.08.019

[13] Han W. S., Hong J. M., Kim H. S., Song, Y. W., Multi-pulsed white light sintering of printed Cu nanoinks, Nanotechnology, 22 (2011) 395705.

DOI: 10.1088/0957-4484/22/39/395705

[14] Wang B. Y, Yoo T. H, Song Y. W, Lim D. S, Oh, Y. J, Cu Ion Ink for a Flexible Substrate and Highly Conductive Patterning by Intensive Pulsed Light Sintering, ACS Appl. Mater. Interfaces 5(2013) 4113−4119.

DOI: 10.1021/am303268k

[15] Jang S, Seo Y, Choi J, Kim T, Cho J, Kim S, Kim D, Sintering of inkjet printed copper nanoparticles for flexible electronics, Scripta Materialia 62 (2010) 258–261.

DOI: 10.1016/j.scriptamat.2009.11.011

[16] Zenou M, Ermak O, Saar A, Kotler Z, Laser sintering of copper nanoparticles, J. Phys. D: Appl. Phys. 47 (2014) 025501.

DOI: 10.1088/0022-3727/47/2/025501

[17] Balamurugan B, Mehta B. R., Shivaprasad S. M., Surface-modified CuO layer in size-stabilized single-phase Cu2O nanoparticles, APPLIED PHYSICS LETTERS, 79(2001) 19.

DOI: 10.1063/1.1416478

[18] Palkar V. R., Ayyub P., Chattopadhyay S., Multani, M. Size-induced structural transitions in the Cu-O and Ce-O systems, PHYSICAL REVIEW B, 53(1996) 5.

DOI: 10.1103/physrevb.53.2167

[19] Kim H S, Dhage S R, Shim D E and Hahn H T, Intense pulsed light sintering of copper nanoink for printed electronics, Appl. Phys. A 97 (2009)791.

DOI: 10.1007/s00339-009-5360-6

[20] Dharmadasa R. Jha M., Amos D. A., Druffel T., Room Temperature Synthesis of a Copper Ink for the Intense Pulsed Light Sintering of Conductive Copper Films, ACS Appl. Mater. Interfaces 5(2013)13227−13234.

DOI: 10.1021/am404226e

[21] Ryu J, Kim H S and Hahn H T, Reactive sintering of copper nanoparticles using intense pulsed light for printed electronics, J. Electron. Mater. 40(2011) 42.

DOI: 10.1007/s11664-010-1384-0