Squeal and Thermal Analysis of Automobile Disc Brake Rotors

Abstract:

The brakes of an automobile are among the most critical components regarding the safety features, and disc brakes are the most common type used in passenger vehicles. In this research, the squeal phenomena of a swirl-vent brake rotor and the thermal analysis of two straight-vent brake rotors, made of cast-iron and aluminum-alloy, are investigated. For the squeal analysis, finite element models are created and analyzed using a prestressed modal analysis with complex eigen-solutions. For the thermal analysis, heat transfer coefficients on the surfaces of a rotor as functions of time are first estimated by CFD simulation, and then imported to a thermal analysis program as the boundary condition. Finally, the temperature distribution of the rotor can be calculated by finite element analysis. The simulation results show that vortices will arise in the vented passages of straight-vent rotors, which means less heat carried away and lower heat transfer coefficients. The swirl-vent brake design is clearly better for thermal ventilation. Furthermore, under the same condition, aluminum-alloy rotors exhibit more uniform temperature distributions with smaller temperature gradients than cast-iron rotors do.

• Periodical: Applied Mechanics and Materials (Volumes 764-765)
• Pages: 369-373
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.764-765.369
• Online since: May 2015
• Authors: Wei Hsin Gau, Kun Nan Chen*, Chin Yuan Hung
• Keywords: Brake Rotor, Mode-Coupling, Squeal, Thermal Analysis

References

[1] A. Bajer, V. Belsky, L.J. Zeng: Combining a nonlinear static analysis and complex eigenvalue extraction in brake squeal simulation, SAE paper 2003-0103349. (2003).

DOI: 10.4271/2003-01-3349

[2] M. Z Hassan, P.C. Brooks, D.C. Barton: A predictive tool to evaluate disk brake squeal using a fully coupled thermomechanical finite element model, International Journal of Vehicle Design 51(1) (2009) 124-142.

DOI: 10.1504/ijvd.2009.027118

[3] H. Ouyang, A.R. Abu-Bakar, L. Li: A combined analysis of heat conduction, contact pressure and transient vibration of a disc brake. International Journal of Vehicle Design 51(1) (2009) 190-206.

DOI: 10.1504/ijvd.2009.027121

[4] F. Massi, L. Baillet, O. Giannini, A. Sestieri: Brake squeal: linear and nonlinear numerical approaches, Mech. System Signal Processing 21 (2007) 2374-2393.

DOI: 10.1016/j.ymssp.2006.12.008

[5] P.F. Gotowicki, V. Nigrelli, G.V. Mariotti, D. Aleksadric, C. Duboka: Numerical and experimental analysis of a pegs-wing ventilated discs brake rotor, with pads and cylinders, Beograd 2005 EAEC European Automotive Cong., UMV, Paper EAEC05YU-AS04.

DOI: 10.1504/ijvsmt.2006.009603

[6] M. Reibenschuh, G. Oder: Modeling and analysis of thermal and stress loads in train disc brakes – braking from 250km/h to standstill, Strojniški Vestnik – J. Mechanical Engineering 55(7-8) (2009) 494-502.

[7] H.J. Cho, C.D. Cho: A study of thermal and mechanical behaviour for the optimal design of automotive disc brakes, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 222 (2008) 895-915.

DOI: 10.1243/09544070jauto722

[8] A. Belhocine, M. Bouchetara: Thermo-mechanical coupled analysis of automotive brake disc, International Journal of Precision Engineering and Manufacturing 14(9) (2013) 1591-1600.

DOI: 10.1007/s12541-013-0215-7