Leachability of Self-Compacting Concrete (SCC) Incorporated with Fly Ash and Bottom Ash by Using Toxicity Characteristic Leaching Procedure (TCLP)

Abstract:

The process of combustion in coal fired power plant generates ashes, namely fly ash (FA) and bottom ash (BA). In addition, coal ash generated from coal combustion generally contains heavy metals within their compositions. These metals are toxic to the environment as well as to the human health. Fortunately, treatment methods are available for these ashes and the use of FA and BA in concrete mix is one of the few. As such, this study presents the work in determining the leachability of self-compacting concrete (SCC) incorporated with FA and BA. The ashes were obtained from Kapar Energy Ventures power plant in Kapar, Selangor. SCC mixtures incorporated with 10%, 20% and 30% FA (replacing cement) and BA (replacing sand) respectively was formulated and casted. The samples were then crushed to be extracted using Toxicity Characteristic Leaching Procedure (TCLP) and heavy metals content within the samples were identified accordingly using Atomic Absorption Spectrometry (AAS). From the results, it was found that incorporation up to 30% of the ashes were safe as the leached heavy metals concentration did not exceed the regulatory levels, except for arsenic (As). On the other hand, incorporation of 20% FA and BA each in SCC provided the most economically viable product, with high strength and low leachate concentrations. In conclusion, this study will serve as a reference which suggests that FA and BA are widely applicable in concrete technology and its incorporation in SCC constitutes a potential means of adding value with appropriate mix and design.

• Periodical: Applied Mechanics and Materials (Volumes 773-774)
• Pages: 1271-1275
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.773-774.1271
• Online since: July 2015
• Authors: Aeslina Abdul Kadir, Mohd Ikhmal Haqeem Hassan*, Eric Cheah Keng Yang
• Keywords: Bottom Ash, Fly Ash, Heavy Metal, Leachability, Self-Compaction Concrete, Waste Products

References

[1] O. Gines, J. M. Chimenos, J. Formosa, and J. R. Rosell, Combined use of MSWI bottom ash and fly ash as aggregate in concrete formulation: Environmental data and mechanical considerations, Journal of Hazardous Materials, vol. 169, pp.643-650, (2009).

DOI: 10.1016/j.jhazmat.2009.03.141

[2] H. S. Shi, and L. L. Kan, Leaching behaviour of heavy metals from MSWI fly ash used in concrete, Journal of Hazardous Materials, vol. 164, pp.750-754, (2009).

DOI: 10.1016/j.jhazmat.2008.08.077

[3] K. S. Sajwan, T. Punshon, and J. C. Seaman, Production of combustion products and their potential uses in K. S. Sajwan, Y. Twardowska, T. Punshon, and A. K. Alva, (Ed. ), Coal Combustion Byproducts and Environmental Issues, Springer, (2006).

DOI: 10.1007/0-387-32177-2

[4] R. Kikuchi, Alternative by-products of coal combustion and simultaneous SO2/SO3/NOx treatment of coal-fired flue gas: Approach to environmentally friendly use of low rank coal, Springer, (2006).

DOI: 10.1007/0-387-32177-2_3

[5] F. Y. Chang, and M. Y. Wey, Comparison of the characteristics of bottom and fly ashes generated from various incineration processes, Journal of Hazardous Materials, vol. B138, pp.594-603, (2006).

DOI: 10.1016/j.jhazmat.2006.05.099

[6] J. E. Aubert, B. Husson, and A. Vaquier, Use of municipal solid waste incineration fly ash in concrete, Cement and Concrete Research, vol. 34, pp.957-963, (2004).

DOI: 10.1016/j.cemconres.2003.11.002

[7] EN 206-1: 2000, Concrete – part 1: specification, performance, production and conformity, (2000).

[8] EN 197-1: 2000, Cement – part 1: composition, specifications and conformity criteria for common cements, (2000).

[9] BS EN 12390-1: 2000, Testing hardened concrete – part 1: shape, dimensions and other requirements for specimens and moulds, (2000).

DOI: 10.3403/30254400

[10] BS EN 12350-8: 2010, Testing fresh concrete – part 8, part 11 and part 12: self-compacting concrete, –(2010).

[11] US EPA (Environmental Protection Agency), Test Method 1311 – Toxicity Characteristic Leaching Procedure, (1992).

[12] USEPA, Hazardous Waste Characteristics Scoping Study, US Environmental Protection Agency, Office of Solid Waste, (1996).

[13] EPAV, Guidelines for Hazard Classification of Solid Prescribed Industrial Waste, Publication 996, June, (2005).