A Novel Control Scheme for Power Factor Improvement in Modified Bridgeless Boost Converter

Article Preview

Abstract:

In Green Energy technologies like wind energy conversion systems and Domestic applications like SMPS and UPS systems, the input voltage amplitude and input frequency are time varying in nature. Fast-Escalating and extremely challenging high efficiency requirements for AC-DC power supplies for notebooks, desktop computers are to minimize the power losses (Conduction losses). In the conventional rectifiers power losses are more and power factor is poor resulting in loss of efficiency. Normally, the bridgeless topologies, also referred to as dual boost power factor correction (PFC) rectifiers, may reduce the conduction losses by reducing the number of semi-conductor components in the line current path. Power supply units have to make the load compatible with the source. The presence of non-linear load results in poor power factor operation and produces harmonic components in the line. So PFC techniques are necessary to meet harmonic regulations and standards such as IEC 61000-3-2 and IEEE 519. A modified bridgeless topology may be used for such applications. A novel switching controller is developed that regulates the input resistance to a desired value. Hence input power factor is unity and also the total harmonic distortion is controlled to a tolerable limit. In the proposed model, the modified bridgeless boost converter is activated in to a pure resistance mode. Finally the performance of the modified bridgeless boost converter is compared with the existing basic bridgeless boost converter.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

833-837

Citation:

Online since:

August 2015

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2015 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] Liu, Y.M., Chang, L.K., Single-stage soft-switching AC-DC converter with input current shaping for universal line, IEEE Transactions on Industrial Electronics. 56 (2009) 467 - 479.

DOI: 10.1109/tie.2008.2004392

Google Scholar

[2] Kazerani, M., Ziogas, P. D and Joos, G., A novel active current wave shaping technique for solid state input power factor conditioner, IEEE Transactions on Industrial Electronics. 38 (1991) 72 - 78.

DOI: 10.1109/41.103488

Google Scholar

[3] Vazquez, N., Lopez, j., Arau, J., Hernandez, C and Rodriguez, E., A different approach to implement an active input current shaper, IEEE Transactions on Industrial Electronics. 52 (2005) 132 - 138.

DOI: 10.1109/tie.2004.841101

Google Scholar

[4] Louganski, K.P., Lai, J.S., Current phase lead compensation in single phase PFC boost converters with a reduced switching frequency to line frequency ratio, IEEE Transactions on Power Electronics. 22 (2007) 113 - 119.

DOI: 10.1109/tpel.2006.886656

Google Scholar

[5] Kwon, J.M., Choi, W. Y and Kwon, B.H., Cost effective boost converter with reverse recovery reduction and power factor correction, IEEE Transactions on Industrial Electronics. 55 (2008) 471 -473.

DOI: 10.1109/tie.2007.896526

Google Scholar

[6] Crebier, J.C., Revol, B and Ferrieux, J.P., Boost chopper derived PFC rectifiers: Interest and Reality, IEEE Transactions on Industrial Electronics. 52 (2005) 36 - 45.

DOI: 10.1109/tie.2004.841143

Google Scholar

[7] Martinez, R., Enjeti, P.N., A high performance single phase rectifier with input power factor correction, IEEE Transactions on Power Electronics. 11 (1996) 311 - 317.

DOI: 10.1109/63.486181

Google Scholar

[8] Wang, C. M, A novel Zero-Voltage-Switching PWM boost rectifier with high power factor low conduction losses, IEEE Transactions on Industrial Electronics. 52 (2005) 427 - 435.

DOI: 10.1109/tie.2005.843913

Google Scholar

[9] Huber, L., Jang, Y and Jovanovic, M.M., Performance evaluation of bridgeless PFC boost rectifiers, IEEE Transactions on Power Electronics. 23 (2008) 1381 - 1390.

DOI: 10.1109/tpel.2008.921107

Google Scholar

[10] Moschopoulos, G., Jain, P., Single phase single stage power factor corrected converter topologies, IEEE Transactions on Industrial Electronics. 52 (2005) 23-35.

DOI: 10.1109/tie.2004.841148

Google Scholar

[11] Tripathi, R.K., Das, S. P and Dubey, G.H., Mixed mode operation of boost switch mode rectifier for wide range of load variations, IEEE Transactions on Power Electronics. 17(2002) 999-1009.

DOI: 10.1109/tpel.2002.805581

Google Scholar

[12] Tse, C.K., Circuit theory of power factor correction in switching converters, International Journal of Circuit Theory Applications. 31(2003) 157-198.

DOI: 10.1002/cta.216

Google Scholar

[13] Tse, C.K., Chow, M.H.L., Theoretical study of switching power converters with power factor correction and output regulation, IEEE Transactions on Circuits Systems – I: Fundamental Theory Applications. 47(2000) 1047-1055.

DOI: 10.1109/81.855460

Google Scholar