Design and Manufacture of Nanofibers Using Electrospinning Technique for Aerospace Application

Abstract:

In this study, Polyvinylidene fluoride (PVDF) ultrafine fibers was fabricated by electro spinning equipment using rotating collector drum with different weight percentage of multi-walled carbon nanotube (MWCNT). The fabricated PVDF-MWCNT fiber has embedded to a glass fiber reinforced polymer (GFRP) for structural health monitoring of composite structures. GFRP is non-conductive material. However, by adding (or) embedding conductive PVDF-MWCNT nanocomposites, measuring its relative electrical resistance can be achieved. This study assesses the use of piezo resistive effect and conductivity of carbon nanotubes (CNT) for in-suit measurement of electrical resistance measurements and strain measurement of carbon fiber are correlated for sensing and damage monitoring purpose. The PVDF-MWCNT fiber and PVA-MWCNT fiber embedded in GFRP were evaluated and compared. Its first time PVDF-MWCNT fiber is used in composite material for sensing the damages; hence embedded sensor will downgrade the fatigue life of the composite structures usually, but in this investigation PVDF-MWCNT focus on not to downgrade the material’s mechanical properties. The manufactured specimens were subjected to various incremental loading and unloading tensile test. During mechanical loading and unloading processes the corresponding electrical resistance was monitored simultaneously, to assess the damage level in the structure.

• Periodical: Applied Mechanics and Materials (Volume 852)
• Pages: 72-78
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.852.72
• Online since: September 2016
• Authors: M.S. Nisha*, Dalbir Singh, J. Freesta Shiny, B. Sasirekha
• Keywords: Carbon Nanotube, Electro Spinning, Non-Destructive Testing, PVDF, Smart Material, Structural Health Monitoring

References

[1] Ch.E. Katsikeros , G.N. Labeas, Development and validation of a strain-based Structural Health Monitoring system, Mechanical Systems and Signal Processing 23 (2009) 372– 383.

DOI: 10.1016/j.ymssp.2008.03.006

[2] F.P. Kopsaftopoulos, S.D. Fassois, Vibration based health monitoring for a lightweight truss structure: Experimental assessment of several statistical time series methods, Mechanical Systems and Signal Processing 24 (2010) 1977–(1997).

DOI: 10.1016/j.ymssp.2010.05.013

[3] T.J. Johnson, R.L. Brown, D.E. Adams, M. Schiefer, Distributed structural health monitoring with a smart sensor array, Mechanical Systems and Signal Processing 18 (2004) 555–572.

DOI: 10.1016/s0888-3270(03)00002-5

[4] M.J. Sundaresan, G. Grandhi, F. Nkrumah, S. Redlapallia, B. Ali, Structural health management using wave propagation techniques, in: Proceedings of ISSS 2005 International Conference on Smart Materials Structures and Systems, July 28–30, 2005, Bangalore, India.

[5] Health Monitoring for Airframe Structural Characterization, NASA/CR-2002-211428.

[6] D.L. Balageas, Structural health monitoring R&D at the 'European Research Establishments in Aeronautics', (EREA), Aerospace Science and Technology 6 (2002) 159–170.

DOI: 10.1016/s1270-9638(01)01140-3

[7] N.D. Alexopoulosa, b, *, C. Bartholome c, P. Poulin c, Z. Marioli-Riga, Structural health monitoring of glass fiber reinforced composites usingembedded carbon nanotube (CNT) fibers, Composites Science and Technology 70 (2010) 260–271.

DOI: 10.1016/j.compscitech.2009.10.017

[8] N.D. Alexopoulosa, b, *, C. Bartholomec, P. Poulinc, Z. Marioli-Riga, Damage detection of glass fiber reinforced composites using embedded PVA–carbonnanotube (CNT) fibers, Composites Science and Technology 70 (2010) 1733–1741.

DOI: 10.1016/j.compscitech.2010.07.004

[9] Schulte K, Baron Ch. Compos SciTechnol 1989; 36: 349–56.

[10] Todoroki A, Kobayashi H, Matuura K. JSME Int J 1995; 38/4: 524–30.

[11] Todoroki A, Tanaka M. Composite Science and Technology 2002; 62: 629–39.

[12] Todoroki A, Tanaka M, Shimamura Y, Kobayashi H. Advance Composite Materials 2004; 13/2: 107–20.

[13] Todoroki A, Omagari K, Shimamura Y, Kobayashi H. Composite Science and Technology 2006; 66: 1539–45.

[14] Iijima S. Helical microtubules of graphitic carbon. Nature1991; 354(6348): 56–8.

[15] Smalley RE et al. Carbon nanotubes: synthesis, structure, properties and applications. Springer-Verlag; (2000).

[16] Flandin L, Brechet Y, Cavaille JY. Electrically conductive polymer nanocomposites as deformation sensors. Compos Sci Technol 2001; 61(6): 895–901.

DOI: 10.1016/s0266-3538(00)00175-5

[17] Zhang R, Baxendale M, Peijs T. Universal resistivity-strain dependence of carbon nanotube/polymer composites. Phys Rev B 2007; 76(19): 195433.

DOI: 10.1103/physrevb.76.195433

[18] Nofar M, Hoa SV, Pugh MD. Failure detection and monitoring in polymer matrix composites subjected to static and dynamic loads using carbon nanotube networks. Compos Sci Technol 2009; 69(10): 1599–606.

DOI: 10.1016/j.compscitech.2009.03.010

[19] Alamusi et al. Piezoresistive strain sensors made from carbon nanotubes based polymer nanocomposites. Sensors 2011; 11(11): 10691–723.

DOI: 10.3390/s111110691

[20] Ferrreira A et al. Electromechanical performance of poly(vinylidene fluoride)/carbon nanotube composites for strain sensor applications. Sens Actuators, A 2012; 178: 10–6.

DOI: 10.1016/j.sna.2012.01.041

[21] Z.H. Liu et al. Piezoelectric properties of PVDF/MWCNT nanofiber using near-field electrospinning. Sensors and Actuators A: Physical 193, 2013, 13-24.

DOI: 10.1016/j.sna.2013.01.007

[22] Kriangsak Ketpang et al. Electrospinning PVDF/PPy/MWCNTs conducting composites Synthetic Metals, 160, 15–16, 2010, 1603-1608.

DOI: 10.1016/j.synthmet.2010.05.022

[23] Tânia L. S et al. Multi-walled carbon nanotube/PVDF blended membranes with sponge- and finger-like pores for direct contact membrane distillation 357, 2015, 233-245.

DOI: 10.1016/j.desal.2014.11.025

[24] Fenghua Su et al. Effect of MWCNT dimension on the electrical percolation and mechanical properties of poly(vinylidenefluoride-hexafluoropropylene) based nanocomposites Synthetic Metals, 191, 2014, 99-103.

DOI: 10.1016/j.synthmet.2014.02.023

[25] L.L. Sun ,B. Li ,Z.G. Zhang W.H. Zhong , Achieving very high fraction of b-crystal PVDF and PVDF/CNF composites and their effect on AC conductivity and microstructure through a stretching process, European Polymer Journal 46 (2010) 2112–2119.

DOI: 10.1016/j.eurpolymj.2010.09.003

[26] Chih-Wen Tang , Lili Sun , Bin Li , Brooks Lively , Wei-Hong Zhong , The effects of nanofillers, stretching and recrystallization on microstructure, phase transformation and dielectric properties in PVDF nanocomposites, European Polymer Journal 48 (2012).

DOI: 10.1016/j.eurpolymj.2012.04.002

[27] P. Lakshmiand M.S. Nisha, Development of Smart Nano composites forAerospace Structural Health Monitoring System, International Journal of Applied Engineering Research, 10, 2015, 16303-16320.